Services

QGIS Server is able to serve data according to standard protocols as described by the Open Geospatial Consortium (OGC):

  • WMS 1.1.0 and 1.3.0
  • WFS 1.0.0 and 1.1.0
  • WCS 1.1.1
  • WMTS 1.0.0

Extra vendor parameters and requests are supported in addition to the original standard that greatly enhance the possibilities of customizing its behavior thanks to the QGIS rendering engine.

Web Map Service (WMS)

The 1.1.0 and 1.3.0 WMS standards implemented in QGIS Server provide a HTTP interface to request map or legend images generated from a QGIS project. A typical WMS request defines the QGIS project to use, the layers to render as well as the image format to generate. Basic support is also available for the Styled Layer Descriptor (SLD) standard.

Specifications document according to the version number of the service:

Standard requests provided by QGIS Server:

Request Description
GetCapabilities Return XML metadata with information about the server
GetMap Return a map
GetFeatureInfo Retrieves data (geometry and values) for a pixel location
GetLegendGraphics Returns legend symbols

Vendor requests provided by QGIS Server:

Request Description
GetPrint Returns a QGIS composition
GetProjectSettings Returns specific information about QGIS Server

GetMap

Standard parameters for the GetMap request according to the OGC WMS 1.1.0 and 1.3.0 specifications:

Parameter Required Description
SERVICE Yes Name of the service (WMS)
VERSION No Version of the service
REQUEST Yes Name of the request (GetMap)
LAYERS No Layers to display
STYLES No Layers’ style
SRS / CRS Yes Coordinate reference system
BBOX No Map extent
WIDTH Yes Width of the image in pixels
HEIGHT Yes Height of the image in pixels
FORMAT No Image format
TRANSPARENT No Transparent background

In addition to the standard ones, QGIS Server supports the following extra parameters:

Parameter Required Description
MAP Yes Specify the QGIS project file
BGCOLOR No Specify the background color
DPI No Specify the output resolution
IMAGE_QUALITY No JPEG compression
OPACITIES No Opacity for layer or group
FILTER No Subset of features
SELECTION No Highlight features
FILE_NAME No

Only for FORMAT=application/dxf

File name of the downloaded file

FORMAT_OPTIONS No

Only for FORMAT=application/dxf

key:value pairs separated by semicolon.

  • SCALE: to be used for symbology rules, filters and styles (not actual scaling of the data - data remains in the original scale).
  • MODE:NOSYMBOLOGY|FEATURESYMBOLOGY|SYMBOLLAYERSYMBOLOGY: corresponds to the three export options offered in the QGIS Desktop DXF export dialog.
  • LAYERSATTRIBUTES:yourcolumn_with_values_to_be_used_for_dxf_layernames if not specified, the original QGIS layer names are used.
  • USE_TITLE_AS_LAYERNAME: if enabled, the title of the layer will be used as layer name.

URL example:

http://localhost/qgis_server?
SERVICE=WMS
&VERSION=1.3.0
&REQUEST=GetMap
&MAP=/home/user/project.qgs
&LAYERS=mylayer1,mylayer2,mylayer3
&STYLES=style1,default,style3
&OPACITIES=125,200,125
&CRS=EPSG:4326
&WIDTH=400
&HEIGHT=400
&FORMAT=image/png
&TRANSPARENT=TRUE
&DPI=300

SERVICE

This parameter has to be WMS in case of the GetMap request.

VERSION

This parameter allows to specify the version of the service to use. Available values for the VERSION parameter are:

  • 1.1.0
  • 1.3.0

If no version is indicated in the request, then 1.3.0 is used by default.

According to the version number, slight differences have to be expected as explained later for the next parameters:

  • CRS / SRS
  • BBOX

REQUEST

This parameter is GetMap in case of the GetMap request.

LAYERS

This parameter allows to specify the layers to display on the map. Names have to be separated by a comma.

In addition, QGIS Server introduced some options to select layers by:

  • a short name
  • the layer id

The short name of a layer may be configured through Properties ‣ Metadata in layer menu. If the short name is defined, then it’s used by default instead of the layer’s name:

http://localhost/qgis_server?
SERVICE=WMS
&REQUEST=GetMap
&LAYERS=mynickname1,mynickname2
&...

Moreover, there’s a project option allowing to select layers by their id in OWS Server ‣ WMS capabilities menu of the Project ‣ Properties… dialog. To activate this option, the checkbox Use layer ids as names has to be selected.

http://localhost/qgis_server?
SERVICE=WMS
&REQUEST=GetMap
&LAYERS=mylayerid1,mylayerid2
&...

STYLES

This parameter can be used to specify a layer’s style for the rendering step. Styles have to be separated by a comma. The name of the default style is default.

SRS / CRS

This parameter allows to indicate the map output Spatial Reference System in WMS 1.1.0 and has to be formed like EPSG:XXXX. Note that CRS is also supported if current version is 1.1.0.

For WMS 1.3.0, CRS parameter is preferable but SRS is also supported.

Note that if both CRS and SRS parameters are indicated in the request, then it’s the current version indicated in VERSION parameter which is decisive.

In the next case, the SRS parameter is kept whatever the VERSION parameter because CRS is not indicated:

http://localhost/qgis_server?
SERVICE=WMS
&REQUEST=GetMap
&VERSION=1.3.0
&SRS=EPSG:2854
&...

In the next case, the SRS parameter is kept instead of CRS because of the VERSION parameter:

http://localhost/qgis_server?
SERVICE=WMS
&REQUEST=GetMap
&VERSION=1.1.0
&CRS=EPSG:4326
&SRS=EPSG:2854
&...

In the next case, the CRS parameter is kept instead of SRS because of the VERSION parameter:

http://localhost/qgis_server?
SERVICE=WMS
&REQUEST=GetMap
&VERSION=1.3.0
&CRS=EPSG:4326
&SRS=EPSG:2854
&...

BBOX

This parameter allows to specify the map extent with units according to the current CRS. Coordinates have to be separated by a comma.

However, a slight difference has to be noticed according to the current VERSION parameter. Actually, in WMS 1.1.0, coordinates are formed like minx,miny,maxx,maxy or minlong,minlat,maxlong,maxlat. For example:

http://localhost/qgis_server?
SERVICE=WMS
&REQUEST=GetMap
&VERSION=1.1.0
&SRS=epsg:4326
&BBOX=-180,-90,180,90
&...

But the axis is reversed in WMS 1.3.0, so coordinates are formed like: miny,minx,maxy,maxx or minlat,minlong,maxlat,maxlong. For example:

http://localhost/qgis_server?
SERVICE=WMS
&REQUEST=GetMap
&VERSION=1.3.0
&CRS=epsg:4326
&BBOX=-90,-180,90,180
&...

WIDTH

This parameter allows to specify the width in pixels of the output image.

HEIGHT

This parameter allows to specify the height in pixels of the output image.

FORMAT

This parameter may be used to specify the format of map image. Available values are:

  • jpg

  • jpeg

  • image/jpeg

  • image/png

  • image/png; mode=1bit

  • image/png; mode=8bit

  • image/png; mode=16bit

  • application/dxf Only layers that have read access in the WFS service are exported in the DXF format.

    URL example:

    http://localhost/qgis_server?
    SERVICE=WMS&VERSION=1.3.0
    &REQUEST=GetMap
    &FORMAT=application/dxf
    &LAYERS=Haltungen,Normschacht,Spezialbauwerke
    &STYLES=
    &CRS=EPSG%3A21781&BBOX=696136.28844801,245797.12108743,696318.91114315,245939.25832905
    &WIDTH=1042
    &HEIGHT=811
    &FORMAT_OPTIONS=MODE:SYMBOLLAYERSYMBOLOGY;SCALE:250&FILE_NAME=plan.dxf
    

TRANSPARENT

This boolean parameter can be used to specify the background transparency. Available values are (not case sensitive):

  • TRUE
  • FALSE

However, this parameter is ignored if the format of the map image indicated with FORMAT is different from PNG.

MAP

This parameter allows to define the QGIS project file to use.

As mentioned in GetMap parameters table, MAP is mandatory because a request needs a QGIS project to actually work. However, the QGIS_PROJECT_FILE environment variable may be used to define a default QGIS project. In this specific case, MAP is not longer a required parameter. For further information you may refer to Advanced configuration.

BGCOLOR

This parameter allows to indicate a background color for the map image. However it cannot be combined with TRANSPARENT parameter in case of PNG images (transparency takes priority). The colour may be literal or in hexadecimal notation.

URL example with the literal notation:

http://localhost/qgis_server?
SERVICE=WMS
&REQUEST=GetMap
&VERSION=1.3.0
&BGCOLOR=green
&...

URL example with the hexadecimal notation:

http://localhost/qgis_server?
SERVICE=WMS
&REQUEST=GetMap
&VERSION=1.3.0
&BGCOLOR=0x00FF00
&...

DPI

This parameter can be used to specify the requested output resolution.

IMAGE_QUALITY

This parameter is only used for JPEG images. By default, the JPEG compression is -1.

You can change the default per QGIS project in the OWS Server ‣ WMS capabilities menu of the Project ‣ Properties… dialog. If you want to override it in a GetMap request you can do it using the IMAGE_QUALITY parameter.

OPACITIES

Opacity can be set on layer or group level. Allowed values range from 0 (fully transparent) to 255 (fully opaque).

FILTER

A subset of layers can be selected with the FILTER parameter. Syntax is basically the same as for the QGIS subset string. However, there are some restrictions to avoid SQL injections into databases via QGIS Server. If a dangerous string is found in the parameter, QGIS Server will return the next error:

Indeed, text strings need to be enclosed with quotes (single quotes for strings, double quotes for attributes). A space between each word / special character is mandatory. Allowed Keywords and special characters are 'AND','OR','IN','=','<','>=','>','>=','!=*,'(',')'. Semicolons in string expressions are not allowed

URL example:

http://localhost/qgis_server?
SERVICE=WMS
&REQUEST=GetMap
&LAYERS=mylayer1,mylayer2
&FILTER=mylayer1:"OBJECTID" = 3;mylayer2:'text' = 'blabla'
&...

Note

It is possible to make attribute searches via GetFeatureInfo and omit the X/Y parameter if a FILTER is there. QGIS Server then returns info about the matching features and generates a combined bounding box in the xml output.

SELECTION

The SELECTION parameter can highlight features from one or more layers. Vector features can be selected by passing comma separated lists with feature ids.

http://localhost/qgis_server?
SERVICE=WMS
&REQUEST=GetMap
&LAYERS=mylayer1,mylayer2
&SELECTION=mylayer1:3,6,9;mylayer2:1,5,6
&...

The following image presents the response from a GetMap request using the SELECTION option e.g. http://myserver.com/...&SELECTION=countries:171,65.

As those features id’s correspond in the source dataset to France and Romania they’re highlighted in yellow.

../../../../_images/server_selection_parameter.png

Server response to a GetMap request with SELECTION parameter

GetFeatureInfo

Standard parameters for the GetFeatureInfo request according to the OGC WMS 1.1.0 and 1.3.0 specifications:

Parameter Required Description
SERVICE Yes Name of the service (WMS)
VERSION No See GetMap
REQUEST Yes See GetMap
LAYERS No See GetMap
STYLES No See GetMap
SRS / CRS Yes See GetMap
BBOX No See GetMap
WIDTH Yes See GetMap
HEIGHT Yes See GetMap
TRANSPARENT No See GetMap
INFO_FORMAT No Output format
QUERY_LAYERS Yes Layers to query
FEATURE_COUNT No Maximum number of features to return
I No Pixel column of the point to query
X No Same as I parameter, but in WMS 1.1.0
J No Pixel row of the point to query
Y No Same as J parameter, but in WMS 1.1.0

In addition to the standard ones, QGIS Server supports the following extra parameters:

Parameter Required Description
MAP Yes See GetMap
FILTER No See GetMap
FI_POINT_TOLERANCE No Tolerance in pixels for point layers
FI_LINE_TOLERANCE No Tolerance in pixels for line layers
FI_POLYGON_TOLERANCE No Tolerance in pixels for polygon layers
FILTER_GEOM No Geometry filtering
WITH_MAPTIP No Add map tips to the output
WITH_GEOMETRY No Add geometry to the output

URL example:

http://localhost/qgis_server?
SERVICE=WMS
&VERSION=1.3.0
&REQUEST=GetMap
&MAP=/home/user/project.qgs
&LAYERS=mylayer1,mylayer2,mylayer3
&CRS=EPSG:4326
&WIDTH=400
&HEIGHT=400
&INFO_FORMAT=text/xml
&TRANSPARENT=TRUE
&QUERY_LAYERS=mylayer1
&FEATURE_COUNT=3
&I=250
&J=250

INFO_FORMAT

This parameter may be used to specify the format of the result. Available values are:

  • text/xml
  • text/html
  • text/plain
  • application/vnd.ogc.gml
  • application/json

QUERY_LAYERS

This parameter specifies the layers to display on the map. Names are separated by a comma.

In addition, QGIS Server introduces options to select layers by:

  • short name
  • layer id

See the LAYERS parameter defined in See GetMap for more information.

FEATURE_COUNT

This parameter specifies the maximum number of features per layer to return. For example if QUERY_LAYERS is set to layer1,layer2 and FEATURE_COUNT is set to 3 then a maximum of 3 features from layer1 will be returned. Likewise a maximun of 3 features from layer2 will be returned.

By default, only 1 feature per layer is returned.

I

This parameter, defined in WMS 1.3.0, allows you to specify the pixel column of the query point.

X

Same parameter as I, but defined in WMS 1.1.0.

J

This parameter, defined in WMS 1.3.0, allows you to specify the pixel row of the query point.

Y

Same parameter as J, but defined in WMS 1.1.0.

FI_POINT_TOLERANCE

This parameter specifies the tolerance in pixels for point layers.

FI_LINE_TOLERANCE

This parameter specifies the tolerance in pixels for line layers.

FI_POLYGON_TOLERANCE

This parameter specifies the tolerance in pixels for polygon layers.

FILTER_GEOM

This parameter specifies a WKT geometry with which features have to intersect.

WITH_MAPTIP

This parameter specifies whether to add map tips to the output.

Available values are (not case sensitive):

  • TRUE
  • FALSE

WITH_GEOMETRY

This parameter specifies whether to add geometries to the output.

Available values are (not case sensitive):

  • TRUE
  • FALSE

GetPrint

QGIS Server has the capability to create print layout output in pdf or pixel format. Print layout windows in the published project are used as templates. In the GetPrint request, the client has the possibility to specify parameters of the contained layout maps and labels.

Parameters for the GetPrint request:

Parameter Required Description
MAP Yes Specify the QGIS project file
SERVICE Yes Name of the service (WMS)
VERSION No See GetMap
REQUEST Yes Name of the request (GetPrint)
LAYERS No See GetMap
TEMPLATE Yes Layout template to use
SRS / CRS Yes See GetMap
FORMAT Yes Output format
STYLES No See GetMap
TRANSPARENT No See GetMap
OPACITIES No See GetMap
SELECTION No See GetMap
mapX:EXTENT No Extent of the map ‘X’
mapX:LAYERS No Layers of the map ‘X’
mapX:STYLES No Layers’ style of the map ‘X’
mapX:SCALE No Layers’ scale of the map ‘X’
mapX:ROTATION No Rotation of the map ‘X’
mapX:GRID_INTERVAL_X No Grid interval on x axis of the map ‘X’
mapX:GRID_INTERVAL_Y No Grid interval on y axis of the map ‘X’

URL example:

http://localhost/qgis_server?
SERVICE=WMS
&VERSION=1.3.0
&REQUEST=GetPrint
&MAP=/home/user/project.qgs
&CRS=EPSG:4326
&FORMAT=png
&map0:EXTENT=-180,-90,180,90
&map0:LAYERS=mylayer1,mylayer2,mylayer3
&map0:OPACITIES=125,200,125
&map0:ROTATION=45

Note that the layout template may contain more than one map. In this way, if you want to configure a specific map, you have to use mapX: parameters where X is a positive number that you can retrieve thanks to the GetProjectSettings request.

For example:

<WMS_Capabilities>
...
<ComposerTemplates xsi:type="wms:_ExtendedCapabilities">
<ComposerTemplate width="297" height="210" name="Druckzusammenstellung 1">
<ComposerMap width="171" height="133" name="map0"/>
<ComposerMap width="49" height="46" name="map1"/></ComposerTemplate>
</ComposerTemplates>
...
</WMS_Capabilities>

SERVICE

This parameter has to be WMS.

REQUEST

This parameter has to be GetPrint for the GetPrint request.

TEMPLATE

This parameter can be used to specify the name of a layout template to use for printing.

FORMAT

This parameter specifies the format of map image. Available values are:

  • jpg
  • jpeg
  • image/jpeg
  • png
  • image/png
  • svg
  • image/svg
  • image/svg+xml
  • pdf
  • application/pdf

If the FORMAT parameter is different from one of these values, then an exception is returned.

mapX:EXTENT

This parameter specifies the extent for a layout map item as xmin,ymin,xmax,ymax.

mapX:ROTATION

This parameter specifies the map rotation in degrees.

mapX:GRID_INTERVAL_X

This parameter specifies the grid line density in the X direction.

mapX:GRID_INTERVAL_Y

This parameter specifies the grid line density in the Y direction.

mapX:SCALE

This parameter specifies the map scale for a layout map item. This is useful to ensure scale based visibility of layers and labels even if client and server may have different algorithms to calculate the scale denominator.

mapX:LAYERS

This parameter specifies the layers for a layout map item. See See GetMap for more information on this parameter.

mapX:STYLES

This parameter specifies the layers’ styles defined in a specific layout map item. See See GetMap for more information on this parameter.

GetLegendGraphics

Several additional parameters are available to change the size of the legend elements:

  • BOXSPACE space between legend frame and content (mm)
  • LAYERSPACE vertical space between layers (mm)
  • LAYERTITLESPACE vertical space between layer title and items following (mm)
  • SYMBOLSPACE vertical space between symbol and item following (mm)
  • ICONLABELSPACE horizontal space between symbol and label text (mm)
  • SYMBOLWIDTH width of the symbol preview (mm)
  • SYMBOLHEIGHT height of the symbol preview (mm)

These parameters change the font properties for layer titles and item labels:

  • LAYERFONTFAMILY / ITEMFONTFAMILY font family for layer title / item text
  • LAYERFONTBOLD / ITEMFONTBOLD TRUE to use a bold font
  • LAYERFONTSIZE / ITEMFONTSIZE Font size in point
  • LAYERFONTITALIC / ITEMFONTITALIC TRUE to use italic font
  • LAYERFONTCOLOR / ITEMFONTCOLOR Hex color code (e.g. #FF0000 for red)
  • LAYERTITLE / RULELABEL set them to FALSE to get only the legend graphics without labels

Content based legend. These parameters let the client request a legend showing only the symbols for the features falling into the requested area:

  • BBOX the geographical area for which the legend should be built
  • CRS / SRS the coordinate reference system adopted to define the BBOX coordinates
  • WIDTH / HEIGHT if set these should match those defined for the GetMap request, to let QGIS Server scale symbols according to the map view image size.

Content based legend features are based on the UMN MapServer implementation:

  • SHOWFEATURECOUNT if set to TRUE adds in the legend the feature count of the features like in the following image:

    ../../../../_images/getfeaturecount_legend.png

GetProjectSettings

This request type works similar to GetCapabilities, but it is more specific to QGIS Server and allows a client to read additional information which is not available in the GetCapabilities output:

  • initial visibility of layers
  • information about vector attributes and their edit types
  • information about layer order and drawing order
  • list of layers published in WFS

Web Feature Service (WFS)

The 1.0.0 and 1.1.0 WFS standards implemented in QGIS Server provide a HTTP interface to query geographic features from a QGIS project. A typical WFS request defines the QGIS project to use and the layer to query.

Specifications document according to the version number of the service:

Standard requests provided by QGIS Server:

Request Description
GetCapabilities Returns XML metadata with information about the server
GetFeature Returns a selection of features
DescribeFeatureType Returns a description of feature types and properties
Transaction Allows features to be inserted, updated or deleted

GetFeature

Standard parameters for the GetFeature request according to the OGC WFS 1.0.0 and 1.1.0 specifications:

Parameter Required Description
SERVICE Yes Name of the service
VERSION No Version of the service
REQUEST Yes Name of the request
TYPENAME No Name of layers
OUTPUTFORMAT No Output Format
RESULTTYPE No Type of the result
PROPERTYNAME No Name of properties to return
MAXFEATURES No Maximum number of features to return
SRSNAME No Coordinate reference system
FEATUREID No Filter the features by ids
FILTER No OGC Filter Encoding
BBOX No Map Extent
SORTBY No Sort the results

In addition to the standard ones, QGIS Server supports the following extra parameters:

Parameter Required Description
MAP Yes Specify the QGIS project file
STARTINDEX No Paging
GEOMETRYNAME No Type of geometry to return
EXP_FILTER No Expression filtering

SERVICE

This parameter has to be WFS in case of the GetFeature request.

For example:

http://localhost/qgis_server?
SERVICE=WFS
&...

VERSION

This parameter allows to specify the version of the service to use. Available values for the VERSION parameter are:

  • 1.0.0
  • 1.1.0

If no version is indicated in the request, then 1.1.0 is used by default.

URL example:

http://localhost/qgis_server?
SERVICE=WFS
&VERSION=1.1.0
&...

REQUEST

This parameter is GetFeature in case of the GetFeature request.

URL example:

http://localhost/qgis_server?
SERVICE=WFS
&VERSION=1.1.0
&REQUEST=GetFeature
&...

RESULTTYPE

This parameter may be used to specify the kind of result to return. Available values are:

  • results: the default behavior
  • hits: returns only a feature count

URL example:

http://localhost/qgis_server?
SERVICE=WFS
&VERSION=1.1.0
&REQUEST=GetFeature
&RESULTTYPE=hits
&...

GEOMETRYNAME

This parameter can be used to specify the kind of geometry to return for features. Available values are:

  • extent
  • centroid
  • none

URL example:

http://localhost/qgis_server?
SERVICE=WFS
&VERSION=1.1.0
&REQUEST=GetFeature
&GEOMETRYNAME=centroid
&...

STARTINDEX

This parameter is standard in WFS 2.0, but it’s an extension for WFS 1.0.0. Actually, it can be used to skip some features in the result set and in combination with MAXFEATURES, it provides the ability to page through results.

URL example:

http://localhost/qgis_server?
SERVICE=WFS
&VERSION=1.1.0
&REQUEST=GetFeature
&STARTINDEX=2
&...

Web Map Tile Service (WMTS)

The 1.0.0 WMTS standard implemented in QGIS Server provides a HTTP interface to request tiled map images generated from a QGIS project. A typical WMTS request defined the QGIS project to use, some WMS parameters like layers to render, as well as tile parameters.

Specifications document of the service:

Standard requests provided by QGIS Server:

Request Description
GetCapabilities Returns XML metadata with information about the server
GetTile Returns a tile
GetFeatureInfo Retrieves data (geometry and values) for a pixel location

GetCapabilities

Standard parameters for the GetCapabilities request according to the OGC WMTS 1.0.0 specifications:

Parameter Required Description
SERVICE Yes Name of the service (WMTS)
REQUEST Yes Name of the request (GetCapabilities)

In addition to the standard ones, QGIS Server supports the following extra parameters:

Parameter Required Description
MAP Yes Specify the QGIS project file

URL example:

http://localhost/qgis_server?
SERVICE=WMTS
&REQUEST=GetCapabilities
&MAP=/home/user/project.qgs

SERVICE

This parameter has to be WMTS in case of the GetCapabilities request.

REQUEST

This parameter is GetCapabilities in case of the GetCapabilities request.

MAP

This parameter allows to define the QGIS project file to use.

GetTile

Standard parameters for the GetTile request according to the OGC WMTS 1.0.0 specifications:

Parameter Required Description
SERVICE Yes Name of the service (WMTS)
REQUEST Yes Name of the request (GetTile)
LAYER Yes Layer identifier
FORMAT Yes Output format of the tile
TILEMATRIXSET Yes Name of the pyramid
TILEMATRIX Yes Meshing
TILEROW Yes Row coordinate in the mesh
TILECOL Yes Column coordinate in the mesh

In addition to the standard ones, QGIS Server supports the following extra parameters:

Parameter Required Description
MAP Yes Specify the QGIS project file

URL example:

http://localhost/qgis_server?
SERVICE=WMTS
&REQUEST=GetTile
&MAP=/home/user/project.qgs
&LAYER=mylayer
&FORMAT=image/png
&TILEMATRIXSET=EPSG:4326
&TILEROW=0
&TILECOL=0

SERVICE

This parameter has to be WMTS in case of the GetTile request.

REQUEST

This parameter is GetTile in case of the GetTile request.

LAYER

This parameter allows to specify the layer to display on the tile.

In addition, QGIS Server introduced some options to select a layer by:

  • a short name
  • the layer id

The short name of a layer may be configured through Properties ‣ Metadata in layer menu. If the short name is defined, then it’s used by default instead of the layer’s name:

http://localhost/qgis_server?
SERVICE=WMTS
&REQUEST=GetTile
&LAYER=mynickname
&...

Moreover, there’s a project option allowing to select layers by their id in OWS Server ‣ WMS capabilities menu of the Project ‣ Project Properties dialog. To activate this option, the checkbox Use layer ids as names has to be selected.

http://localhost/qgis_server?
SERVICE=WMTS
&REQUEST=GetTile
&LAYER=mylayerid1
&...

FORMAT

This parameter may be used to specify the format of tile image. Available values are:

  • jpg
  • jpeg
  • image/jpeg
  • image/png

If the FORMAT parameter is different from one of these values, then the default format PNG is used instead.

TILEMATRIXSET

This parameter allows to define the CRS to use to compute the underlying pyramid and has to be formed like EPSG:XXXX.

TILEMATRIX

This parameter allows to define the matrix to use for the output tile.

TILEROW

This parameter allows to select the row of the tile to get within the matrix.

TILECOL

This parameter allows to select the column of the tile to get within the matrix.

MAP

This parameter allows to define the QGIS project file to use.

As mentioned in GetMap parameters table, MAP is mandatory because a request needs a QGIS project to actually work. However, the QGIS_PROJECT_FILE environment variable may be used to define a default QGIS project. In this specific case, MAP is not longer a required parameter. For further information you may refer to Advanced configuration.

GetFeatureInfo

Standard parameters for the GetFeatureInfo request according to the OGC WMTS 1.0.0 specifications:

Parameter Required Description
SERVICE Yes Name of the service (WMTS)
REQUEST Yes Name of the request (GetFeatureInfo)
LAYER Yes Layer identifier
INFOFORMAT No Output format
I No X coordinate of a pixel
J No Y coordinate of a pixel
TILEMATRIXSET Yes See GetTile
TILEMATRIX Yes See GetTile
TILEROW Yes See GetTile
TILECOL Yes See GetTile

In addition to the standard ones, QGIS Server supports the following extra parameters:

Parameter Required Description
MAP Yes Specify the QGIS project file

URL example:

http://localhost/qgis_server?
SERVICE=WMTS
&REQUEST=GetFeatureInfo
&MAP=/home/user/project.qgs
&LAYER=mylayer
&INFOFORMAT=image/html
&I=10
&J=5

SERVICE

This parameter has to be WMTS in case of the GetFeatureInfo request.

REQUEST

This parameter is GetFeatureInfo in case of the GetFeatureInfo request.

MAP

This parameter allows to define the QGIS project file to use.

As mentioned in GetMap parameters table, MAP is mandatory because a request needs a QGIS project to actually work. However, the QGIS_PROJECT_FILE environment variable may be used to define a default QGIS project. In this specific case, MAP is not longer a required parameter. For further information you may refer to Advanced configuration.

LAYER

This parameter allows to specify the layer to display on the tile.

In addition, QGIS Server introduced some options to select a layer by:

  • a short name
  • the layer id

The short name of a layer may be configured through Properties ‣ Metadata in layer menu. If the short name is defined, then it’s used by default instead of the layer’s name:

http://localhost/qgis_server?
SERVICE=WMTS
&REQUEST=GetFeatureInfo
&LAYER=mynickname
&...

Moreover, there’s a project option allowing to select layers by their id in OWS Server ‣ WMS capabilities menu of the Project ‣ Project Properties dialog. To activate this option, the checkbox Use layer ids as names has to be selected.

http://localhost/qgis_server?
SERVICE=WMTS
&REQUEST=GetFeatureInfo
&LAYER=mylayerid1
&...

INFOFORMAT

This parameter allows to define the output format of the result. Available values are:

  • text/xml
  • text/html
  • text/plain
  • application/vnd.ogc.gml

The default value is text/plain.

I

This parameter allows to define the X coordinate of the pixel for which we want to retrieve underlying information.

J

This parameter allows to define the Y coordinate of the pixel for which we want to retrieve underlying information.

Extra parameters supported by all request types

  • FILE_NAME parameter: if set, the server response will be sent to the client as a file attachment with the specified file name.

  • MAP parameter: Similar to MapServer, the MAP parameter can be used to specify the path to the QGIS project file. You can specify an absolute path or a path relative to the location of the server executable (qgis_mapserv.fcgi). If not specified, QGIS Server searches for .qgs files in the directory where the server executable is located.

    Example:

    http://localhost/cgi-bin/qgis_mapserv.fcgi?\
      REQUEST=GetMap&MAP=/home/qgis/mymap.qgs&...
    

Note

You can define a QGIS_PROJECT_FILE as an environment variable to tell the server executable where to find the QGIS project file. This variable will be the location where QGIS will look for the project file. If not defined it will use the MAP parameter in the request and finally look at the server executable directory.

REDLINING

This feature is available and can be used with GetMap and GetPrint requests.

The redlining feature can be used to pass geometries and labels in the request which are overlapped by the server over the standard returned image (map). This permits the user to put emphasis or maybe add some comments (labels) to some areas, locations etc. that are not in the standard map.

The request is in the format:

http://qgisplatform.demo/cgi-bin/qgis_mapserv.fcgi?map=/world.qgs&SERVICE=WMS&VERSION=1.3.0&
REQUEST=GetMap
...
&HIGHLIGHT_GEOM=POLYGON((590000 5647000, 590000 6110620, 2500000 6110620, 2500000 5647000, 590000 5647000))
&HIGHLIGHT_SYMBOL=<StyledLayerDescriptor><UserStyle><Name>Highlight</Name><FeatureTypeStyle><Rule><Name>Symbol</Name><LineSymbolizer><Stroke><SvgParameter name="stroke">%23ea1173</SvgParameter><SvgParameter name="stroke-opacity">1</SvgParameter><SvgParameter name="stroke-width">1.6</SvgParameter></Stroke></LineSymbolizer></Rule></FeatureTypeStyle></UserStyle></StyledLayerDescriptor>
&HIGHLIGHT_LABELSTRING=Write label here
&HIGHLIGHT_LABELSIZE=16
&HIGHLIGHT_LABELCOLOR=%23000000
&HIGHLIGHT_LABELBUFFERCOLOR=%23FFFFFF
&HIGHLIGHT_LABELBUFFERSIZE=1.5

Here is the image outputed by the above request in which a polygon and a label are drawn on top of the normal map:

../../../../_images/server_redlining.png

Server response to a GetMap request with redlining parameters

You can see there are several parameters in this request:

  • HIGHLIGHT_GEOM: You can add POINT, MULTILINESTRING, POLYGON etc. It supports multipart geometries. Here is an example: HIGHLIGHT_GEOM=MULTILINESTRING((0 0, 0 1, 1 1)). The coordinates should be in the CRS of the GetMap/GetPrint request.
  • HIGHLIGHT_SYMBOL: This controls how the geometry is outlined and you can change the stroke width, color and opacity.
  • HIGHLIGHT_LABELSTRING: You can pass your labeling text to this parameter.
  • HIGHLIGHT_LABELSIZE: This parameter controls the size of the label.
  • HIGHLIGHT_LABELCOLOR: This parameter controls the label color.
  • HIGHLIGHT_LABELBUFFERCOLOR: This parameter controls the label buffer color.
  • HIGHLIGHT_LABELBUFFERSIZE: This parameter controls the label buffer size.

External WMS layers

QGIS Server allows including layers from external WMS servers in WMS GetMap and WMS GetPrint requests. This is especially useful if a web client uses an external background layer in the web map. For performance reasons, such layers should be directly requested by the web client (not cascaded via QGIS server). For printing however, these layers should be cascaded via QGIS server in order to appear in the printed map.

External layers can be added to the LAYERS parameter as EXTERNAL_WMS:<layername>. The parameters for the external WMS layers (e.g. url, format, dpiMode, crs, layers, styles) can later be given as service parameters <layername>:<parameter>. In a GetMap request, this might look like this:

http://localhost/qgis_server?
SERVICE=WMS&REQUEST=GetMap
...
&LAYERS=EXTERNAL_WMS:basemap,layer1,layer2
&STYLES=,,
&basemap:url=http://externalserver.com/wms.fcgi
&basemap:format=image/jpeg
&basemap:dpiMode=7
&basemap:crs=EPSG:2056
&basemap:layers=orthofoto
&basemap:styles=default

Similarly, external layers can be used in GetPrint requests:

http://localhost/qgis_server?
SERVICE=WMS
...
&REQUEST=GetPrint&TEMPLATE=A4
&map0:layers=EXTERNAL_WMS:basemap,layer1,layer2
&map0:EXTENT=<minx,miny,maxx,maxy>
&basemap:url=http://externalserver.com/wms.fcgi
&basemap:format=image/jpeg
&basemap:dpiMode=7
&basemap:crs=EPSG:2056
&basemap:layers=orthofoto
&basemap:styles=default