25.1.17. Vector general

25.1.17.1. Projektion zuweisen

Weist einem Vektorlayer eine neue Projektion zu.

Erzeugt einen neuen Layer mit exakt den gleichen Objekten und Geometrien wie die Eingabe, aber mit einem neu zugewiesenen KBS. Die Geometrien werden nicht umprojiziert, sondern es wird nur ein neues KBS zugewiesen.

Der Algorithmus kann benutzt werden, um Layer zu reparieren, denen eine falsche Projektion zugewiesen wurde.

Attribute werden von diesem Algorithmus nicht verändert.

Parameter

Label

Name

Type

Beschreibung

Input layer

INPUT

[vector: any]

Vector layer with wrong or missing CRS

Assigned CRS

CRS

[crs]

Default: EPSG:4326 - WGS84

Select the new CRS to assign to the vector layer

Assigned CRS

Optional

OUTPUT

[same as input]

Default: [Create temporary layer]

Specify the output layer containing only the duplicates. One of:

  • Create Temporary Layer (TEMPORARY_OUTPUT)

  • Save to File…

  • Save to Geopackage…

  • Save to Database Table…

The file encoding can also be changed here.

Ausgaben

Label

Name

Type

Beschreibung

Assigned CRS

OUTPUT

[same as input]

Vector layer with assigned projection

Python code

Algorithm ID: native:assignprojection

import processing
processing.run("algorithm_id", {parameter_dictionary})

The algorithm id is displayed when you hover over the algorithm in the Processing Toolbox. The parameter dictionary provides the parameter NAMEs and values. See Verarbeitung Algorithmen von der Konsole aus verwenden for details on how to run processing algorithms from the Python console.

25.1.17.2. Batch Nominatim geocoder

Performs batch geocoding using the Nominatim service against an input layer string field. The output layer will have a point geometry reflecting the geocoded location as well as a number of attributes associated to the geocoded location.

Bemerkung

This algorithm is compliant with the usage policy of the Nominatim geocoding service provided by the OpenStreetMap Foundation.

Parameter

Label

Name

Type

Beschreibung

Input layer

INPUT

[vector: any]

Vector layer to geocode the features

Address field

FIELD

[tablefield: string]

Field containing the addresses to geocode

Geocoded

OUTPUT

[vector: point]

Default: [Create temporary layer]

Specify the output layer containing only the geocoded addresses. One of:

  • Create Temporary Layer (TEMPORARY_OUTPUT)

  • Save to File…

  • Save to Geopackage…

  • Save to Database Table…

  • Append to Layer…

The file encoding can also be changed here.

Ausgaben

Label

Name

Type

Beschreibung

Geocoded

OUTPUT

[vector: point]

Vector layer with point features corresponding to the geocoded addresses

Python code

Algorithm ID: native:batchnominatimgeocoder

import processing
processing.run("algorithm_id", {parameter_dictionary})

The algorithm id is displayed when you hover over the algorithm in the Processing Toolbox. The parameter dictionary provides the parameter NAMEs and values. See Verarbeitung Algorithmen von der Konsole aus verwenden for details on how to run processing algorithms from the Python console.

25.1.17.3. Convert layer to spatial bookmarks

Creates spatial bookmarks corresponding to the extent of features contained in a layer.

Parameter

Label

Name

Type

Beschreibung

Input Layer

INPUT

[vector: line, polygon]

The input vector layer

Bookmark destination

DESTINATION

[enumeration]

Default: 0

Select the destination for the bookmarks. One of:

  • 0 — Project bookmarks

  • 1 — User bookmarks

Name field

NAME_EXPRESSION

[expression]

Field or expression that will give names to the generated bookmarks

Group field

GROUP_EXPRESSION

[expression]

Field or expression that will provide groups for the generated bookmarks

Ausgaben

Label

Name

Type

Beschreibung

Count of bookmarks added

COUNT

[number]

Python code

Algorithm ID: native:layertobookmarks

import processing
processing.run("algorithm_id", {parameter_dictionary})

The algorithm id is displayed when you hover over the algorithm in the Processing Toolbox. The parameter dictionary provides the parameter NAMEs and values. See Verarbeitung Algorithmen von der Konsole aus verwenden for details on how to run processing algorithms from the Python console.

25.1.17.4. Convert spatial bookmarks to layer

Creates a new layer containing polygon features for stored spatial bookmarks. The export can be filtered to only bookmarks belonging to the current project, to all user bookmarks, or a combination of both.

Parameter

Label

Name

Type

Beschreibung

Bookmark source

SOURCE

[enumeration] [list]

Default: [0,1]

Select the source(s) of the bookmarks. One or more of:

  • 0 — Project bookmarks

  • 1 — User bookmarks

Output CRS

CRS

[crs]

Default: EPSG:4326 - WGS 84

The CRS of the output layer

Ergebnis

OUTPUT

[vector: polygon]

Default: [Create temporary layer]

Specify the output layer. One of:

  • Create Temporary Layer (TEMPORARY_OUTPUT)

  • Save to File…

  • Save to Geopackage…

  • Save to Database Table…

The file encoding can also be changed here.

Ausgaben

Label

Name

Type

Beschreibung

Ergebnis

OUTPUT

[vector: polygon]

The output (bookmarks) vector layer

Python code

Algorithm ID: native:bookmarkstolayer

import processing
processing.run("algorithm_id", {parameter_dictionary})

The algorithm id is displayed when you hover over the algorithm in the Processing Toolbox. The parameter dictionary provides the parameter NAMEs and values. See Verarbeitung Algorithmen von der Konsole aus verwenden for details on how to run processing algorithms from the Python console.

25.1.17.5. Create attribute index

Creates an index against a field of the attribute table to speed up queries. The support for index creation depends on both the layer’s data provider and the field type.

No outputs are created: the index is stored on the layer itself.

Parameter

Label

Name

Type

Beschreibung

Input Layer

INPUT

[vector: any]

Select the vector layer you want to create an attribute index for

Attribute to index

FIELD

[tablefield: any]

Field of the vector layer

Ausgaben

Label

Name

Type

Beschreibung

Indexed layer

OUTPUT

[same as input]

A copy of the input vector layer with an index for the specified field

Python code

Algorithm ID: native:createattributeindex

import processing
processing.run("algorithm_id", {parameter_dictionary})

The algorithm id is displayed when you hover over the algorithm in the Processing Toolbox. The parameter dictionary provides the parameter NAMEs and values. See Verarbeitung Algorithmen von der Konsole aus verwenden for details on how to run processing algorithms from the Python console.

25.1.17.6. Create spatial index

Creates an index to speed up access to the features in a layer based on their spatial location. Support for spatial index creation is dependent on the layer’s data provider.

No new output layers are created.

Default menu: Vector ► Data Management Tools

Parameter

Label

Name

Type

Beschreibung

Input Layer

INPUT

[vector: any]

Input vector layer

Ausgaben

Label

Name

Type

Beschreibung

Indexed layer

OUTPUT

[same as input]

A copy of the input vector layer with a spatial index

Python code

Algorithm ID: native:createspatialindex

import processing
processing.run("algorithm_id", {parameter_dictionary})

The algorithm id is displayed when you hover over the algorithm in the Processing Toolbox. The parameter dictionary provides the parameter NAMEs and values. See Verarbeitung Algorithmen von der Konsole aus verwenden for details on how to run processing algorithms from the Python console.

25.1.17.7. Define Shapefile projection

Sets the CRS (projection) of an existing Shapefile format dataset to the provided CRS. It is very useful when a Shapefile format dataset is missing the prj file and you know the correct projection.

Contrary to the Projektion zuweisen algorithm, it modifies the current layer and will not output a new layer.

Bemerkung

For Shapefile datasets, the .prj and .qpj files will be overwritten - or created if missing - to match the provided CRS.

Default menu: Vector ► Data Management Tools

Parameter

Label

Name

Type

Beschreibung

Input layer

INPUT

[vector: any]

Vector layer with missing projection information

CRS

CRS

[crs]

Select the CRS to assign to the vector layer

Ausgaben

Label

Name

Type

Beschreibung

INPUT

[same as input]

The input vector layer with the defined projection

Python code

Algorithm ID: qgis:definecurrentprojection

import processing
processing.run("algorithm_id", {parameter_dictionary})

The algorithm id is displayed when you hover over the algorithm in the Processing Toolbox. The parameter dictionary provides the parameter NAMEs and values. See Verarbeitung Algorithmen von der Konsole aus verwenden for details on how to run processing algorithms from the Python console.

25.1.17.8. Delete duplicate geometries

Finds and removes duplicated geometries.

Attributes are not checked, so in case two features have identical geometries but different attributes, only one of them will be added to the result layer.

Parameter

Label

Name

Type

Beschreibung

Input layer

INPUT

[vector: any]

The layer with duplicate geometries you want to clean

Cleaned

OUTPUT

[same as input]

Default: [Create temporary layer]

Specify the output layer. One of:

  • Create Temporary Layer (TEMPORARY_OUTPUT)

  • Save to File…

  • Save to Geopackage…

  • Save to Database Table…

The file encoding can also be changed here.

Ausgaben

Label

Name

Type

Beschreibung

Count of discarded duplicate records

DUPLICATE_COUNT

[number]

Count of discarded duplicate records

Cleaned

OUTPUT

[same as input]

The output layer without any duplicated geometries

Count of retained records

RETAINED_COUNT

[number]

Count of unique records

Python code

Algorithm ID: native:deleteduplicategeometries

import processing
processing.run("algorithm_id", {parameter_dictionary})

The algorithm id is displayed when you hover over the algorithm in the Processing Toolbox. The parameter dictionary provides the parameter NAMEs and values. See Verarbeitung Algorithmen von der Konsole aus verwenden for details on how to run processing algorithms from the Python console.

25.1.17.9. Delete duplicates by attribute

Deletes duplicate rows by only considering the specified field / fields. The first matching row will be retained, and duplicates will be discarded.

Optionally, these duplicate records can be saved to a separate output for analysis.

Parameter

Label

Name

Type

Beschreibung

Input layer

INPUT

[vector: any]

The input layer

Fields to match duplicates by

FIELDS

[tablefield: any] [list]

Fields defining duplicates. Features with identical values for all these fields are considered duplicates.

Filtered (no duplicates)

OUTPUT

[same as input]

Default: [Create temporary layer]

Specify the output layer containing the unique features. One of:

  • Create Temporary Layer (TEMPORARY_OUTPUT)

  • Save to File…

  • Save to Geopackage…

  • Save to Database Table…

The file encoding can also be changed here.

Filtered (duplicates)

Optional

DUPLICATES

[same as input]

Default: [Skip output]

Specify the output layer containing only the duplicates. One of:

  • Skip Output

  • Create Temporary Layer (TEMPORARY_OUTPUT)

  • Save to File…

  • Save to Geopackage…

  • Save to Database Table…

The file encoding can also be changed here.

Ausgaben

Label

Name

Type

Beschreibung

Filtered (duplicates)

Optional

DUPLICATES

[same as input]

Default: [Skip output]

Vector layer containing the removed features. Will not be produced if not specified (left as [Skip output]).

Count of discarded duplicate records

DUPLICATE_COUNT

[number]

Count of discarded duplicate records

Filtered (no duplicates)

OUTPUT

[same as input]

Vector layer containing the unique features.

Count of retained records

RETAINED_COUNT

[number]

Count of unique records

Python code

Algorithm ID: native:removeduplicatesbyattribute

import processing
processing.run("algorithm_id", {parameter_dictionary})

The algorithm id is displayed when you hover over the algorithm in the Processing Toolbox. The parameter dictionary provides the parameter NAMEs and values. See Verarbeitung Algorithmen von der Konsole aus verwenden for details on how to run processing algorithms from the Python console.

25.1.17.10. Detect dataset changes

Compares two vector layers, and determines which features are unchanged, added or deleted between the two. It is designed for comparing two different versions of the same dataset.

../../../../_images/detect_change.png

Abb. 25.44 Detect dataset change example

Parameter

Label

Name

Type

Beschreibung

Original layer

ORIGINAL

[vector: any]

The vector layer considered as the original version

Revised layer

REVISED

[vector: any]

The revised or modified vector layer

Attributes to consider for match

Optional

COMPARE_ATTRIBUTES

[tablefield: any] [list]

Attributes to consider for match. By default, all attributes are compared.

Geometry comparison behavior

Optional

MATCH_TYPE

[enumeration]

Default: 1

Defines the criteria for comparison. Options:

  • 0 — Exact Match: includes the order and vertices count of geometries

  • 1 — Tolerant Match (Topological Equality): geometries are considered equal

Unchanged features

UNCHANGED

[vector: same as Original layer]

Specify the output vector layer containing the unchanged features. One of:

  • Create Temporary Layer (TEMPORARY_OUTPUT)

  • Save to File…

  • Save to Geopackage…

  • Save to Database Table…

The file encoding can also be changed here.

Added features

ADDED

[vector: same as Original layer]

Specify the output vector layer containing the added features. One of:

  • Create Temporary Layer (TEMPORARY_OUTPUT)

  • Save to File…

  • Save to Geopackage…

  • Save to Database Table…

The file encoding can also be changed here.

Deleted features

DELETED

[vector: same as Original layer]

Specify the output vector layer containing the deleted features. One of:

  • Create Temporary Layer (TEMPORARY_OUTPUT)

  • Save to File…

  • Save to Geopackage…

  • Save to Database Table…

The file encoding can also be changed here.

Ausgaben

Label

Name

Type

Beschreibung

Unchanged features

UNCHANGED

[vector: same as Original layer]

Vector layer containing the unchanged features.

Added features

ADDED

[vector: same as Original layer]

Vector layer containing the added features.

Deleted features

DELETED

[vector: same as Original layer]

Vector layer containing the deleted features.

Count of unchanged features

UNCHANGED_COUNT

[number]

Count of unchanged features.

Count of features added in revised layer

ADDED_COUNT

[number]

Count of features added in revised layer.

Count of features deleted from original layer

DELETED_COUNT

[number]

Count of features deleted from original layer.

Python code

Algorithm ID: native:detectvectorchanges

import processing
processing.run("algorithm_id", {parameter_dictionary})

The algorithm id is displayed when you hover over the algorithm in the Processing Toolbox. The parameter dictionary provides the parameter NAMEs and values. See Verarbeitung Algorithmen von der Konsole aus verwenden for details on how to run processing algorithms from the Python console.

25.1.17.11. Drop geometries

Creates a simple geometryless copy of the input layer attribute table. It keeps the attribute table of the source layer.

If the file is saved in a local folder, you can choose between many file formats.

checkbox Allows features in-place modification

Parameter

Label

Name

Type

Beschreibung

Input layer

INPUT

[vector: any]

The input vector layer

Dropped geometries

OUTPUT

[table]

Specify the output geometryless layer. One of:

  • Create Temporary Layer (TEMPORARY_OUTPUT)

  • Save to File…

  • Save to Geopackage…

  • Save to Database Table…

The file encoding can also be changed here.

Ausgaben

Label

Name

Type

Beschreibung

Dropped geometries

OUTPUT

[table]

The output geometryless layer. A copy of the original attribute table.

Python code

Algorithm ID: native:dropgeometries

import processing
processing.run("algorithm_id", {parameter_dictionary})

The algorithm id is displayed when you hover over the algorithm in the Processing Toolbox. The parameter dictionary provides the parameter NAMEs and values. See Verarbeitung Algorithmen von der Konsole aus verwenden for details on how to run processing algorithms from the Python console.

25.1.17.12. Execute SQL

Runs a simple or complex query with SQL syntax on the source layer.

Input datasources are identified with input1, input2inputN and a simple query will look like SELECT * FROM input1.

Beside a simple query, you can add expressions or variables within the SQL query parameter itself. This is particulary useful if this algorithm is executed within a Processing model and you want to use a model input as a parameter of the query. An example of a query will then be SELECT * FROM [% @table %] where @table is the variable that identifies the model input.

The result of the query will be added as a new layer.

Parameter

Label

Name

Type

Beschreibung

Additional input datasources (called input1, .., inputN in the query)

INPUT_DATASOURCES

[vector: any] [list]

List of layers to query. In the SQL editor you can refer these layers with their real name or also with input1, input2, inputN depending on how many layers have been chosen.

SQL query

INPUT_QUERY

[string]

Type the string of your SQL query, e.g. SELECT * FROM input1.

Unique identifier field

Optional

INPUT_UID_FIELD

[string]

Specify the column with unique ID

Geometry field

Optional

INPUT_GEOMETRY_FIELD

[string]

Specify the geometry field

Geometry type

Optional

INPUT_GEOMETRY_TYPE

[enumeration]

Default: 0

Choose the geometry of the result. By default the algorithm will autodetect it. One of:

  • 0 — Autodetect

  • 1 — No geometry

  • 2 — Point

  • 3 — LineString

  • 4 — Polygon

  • 5 — MultiPoint

  • 6 — MultiLineString

  • 7 — MultiPolygon

CRS

Optional

INPUT_GEOMETRY_CRS

[crs]

The CRS to assign to the output layer

SQL Output

OUTPUT

[vector: any]

Default: [Create temporary layer]

Specify the output layer created by the query. One of:

  • Create Temporary Layer (TEMPORARY_OUTPUT)

  • Save to File…

  • Save to Geopackage…

  • Save to Database Table…

The file encoding can also be changed here.

Ausgaben

Label

Name

Type

Beschreibung

SQL Output

OUTPUT

[vector: any]

Vector layer created by the query

Python code

Algorithm ID: qgis:executesql

import processing
processing.run("algorithm_id", {parameter_dictionary})

The algorithm id is displayed when you hover over the algorithm in the Processing Toolbox. The parameter dictionary provides the parameter NAMEs and values. See Verarbeitung Algorithmen von der Konsole aus verwenden for details on how to run processing algorithms from the Python console.

25.1.17.13. Export layers to DXF

NEW in 3.18

Exports layers to DXF file. For each layer, you can choose a field whose values are used to split features in generated destination layers in DXF output.

Parameter

Label

Name

Type

Beschreibung

Input layers

LAYERS

[vector: any][list]

Input vector layers to export

Symbology mode

SYMBOLOGY_MODE

[enumeration]

Default: 0

Type of symbology to apply to output layers. You can choose between:

  • 0 — No Symbology

  • 1 — Feature Symbology

  • 2 — Symbol Layer Symbology

Symbology scale

SYMBOLOGY_SCALE

[scale]

Default: 1:1 000 000

Default scale of data export.

Encoding

ENCODING

[enumeration]

Encoding to apply to layers.

CRS

CRS

[crs]

Choose the CRS for the output layer.

Use layer title as name

USE_LAYER_TITLE

[boolean]

Default: False

Name the output layer with the layer title (as set in QGIS) instead of the layer name.

Force 2D

FORCE_2D

[boolean]

Default: False

Export labels as MTEXT elements

MTEXT

[boolean]

Default: False

Exports labels as MTEXT or TEXT elements

DXF

OUTPUT

[file]

Default: [Save to temporary file]

Specification of the output DXF file. One of:

  • Save to a Temporary File

  • Save to File…

Ausgaben

Label

Name

Type

Beschreibung

DXF

OUTPUT

[file]

.DXF file containing the input layers

Python code

Algorithm ID: native:dxfexport

import processing
processing.run("algorithm_id", {parameter_dictionary})

The algorithm id is displayed when you hover over the algorithm in the Processing Toolbox. The parameter dictionary provides the parameter NAMEs and values. See Verarbeitung Algorithmen von der Konsole aus verwenden for details on how to run processing algorithms from the Python console.

25.1.17.14. Extract selected features

Saves the selected features as a new layer.

Bemerkung

If the selected layer has no selected features, the newly created layer will be empty.

Parameter

Label

Name

Type

Beschreibung

Input Layer

INPUT

[vector: any]

Layer to save the selection from

Selected features

OUTPUT

[same as input]

Default: [Create temporary layer]

Specify the vector layer for the selected features. One of:

  • Create Temporary Layer (TEMPORARY_OUTPUT)

  • Save to File…

  • Save to Geopackage…

  • Save to Database Table…

The file encoding can also be changed here.

Ausgaben

Label

Name

Type

Beschreibung

Selected features

OUTPUT

[same as input]

Vector layer with only the selected features, or no feature if none was selected.

Python code

Algorithm ID: native:saveselectedfeatures

import processing
processing.run("algorithm_id", {parameter_dictionary})

The algorithm id is displayed when you hover over the algorithm in the Processing Toolbox. The parameter dictionary provides the parameter NAMEs and values. See Verarbeitung Algorithmen von der Konsole aus verwenden for details on how to run processing algorithms from the Python console.

25.1.17.15. Extract Shapefile encoding

Extracts the attribute encoding information embedded in a Shapefile. Both the encoding specified by an optional .cpg file and any encoding details present in the .dbf LDID header block are considered.

Parameter

Label

Name

Type

Beschreibung

Input Layer

INPUT

[vector: any]

ESRI Shapefile (.SHP) Layer to extract the encoding information.

Ausgaben

Label

Name

Type

Beschreibung

Shapefile encoding

ENCODING

[string]

Encoding information specified in the input file

CPG encoding

CPG_ENCODING

[string]

Encoding information specified in any optional .CPG file

LDID encoding

LDID_ENCODING

[string]

Encoding information specified in .dbf LDID header block

Python code

Algorithm ID: native:shpencodinginfo

import processing
processing.run("algorithm_id", {parameter_dictionary})

The algorithm id is displayed when you hover over the algorithm in the Processing Toolbox. The parameter dictionary provides the parameter NAMEs and values. See Verarbeitung Algorithmen von der Konsole aus verwenden for details on how to run processing algorithms from the Python console.

25.1.17.16. Find projection

Creates a shortlist of candidate coordinate reference systems, for instance for a layer with an unknown projection.

The area that the layer is expected to cover must be specified via the target area parameter. The coordinate reference system for this target area must be known to QGIS.

The algorithm operates by testing the layer’s extent in every known reference system and then listing any for which the bounds would be near the target area if the layer was in this projection.

Parameter

Label

Name

Type

Beschreibung

Input Layer

INPUT

[vector: any]

Layer with unknown projection

Target area for layer (xmin, xmax, ymin, ymax)

TARGET_AREA

[extent]

The area that the layer covers.

Available methods are:

  • Calculate from layer…: uses extent of a layer loaded in the current project

  • Use map canvas extent

  • Draw on canvas

  • Enter the coordinates as xmin, xmax, ymin, ymax

CRS candidates

OUTPUT

[table]

Default: [Create temporary layer]

Specify the table (geometryless layer) for the CRS suggestions (EPSG codes). One of:

  • Create Temporary Layer (TEMPORARY_OUTPUT)

  • Save to File…

  • Save to Geopackage…

  • Save to Database Table…

The file encoding can also be changed here.

Ausgaben

Label

Name

Type

Beschreibung

CRS candidates

OUTPUT

[table]

A table with all the CRS (EPSG codes) of the matching criteria.

Python code

Algorithm ID: qgis:findprojection

import processing
processing.run("algorithm_id", {parameter_dictionary})

The algorithm id is displayed when you hover over the algorithm in the Processing Toolbox. The parameter dictionary provides the parameter NAMEs and values. See Verarbeitung Algorithmen von der Konsole aus verwenden for details on how to run processing algorithms from the Python console.

25.1.17.17. Flatten relationship

Flattens a relationship for a vector layer, exporting a single layer containing one parent feature per related child feature. This master feature contains all the attributes for the related features. This allows to have the relation as a plain table that can be e.g. exported to CSV.

../../../../_images/flatten_relationship.png

Abb. 25.45 Form of a region with related children (left) - A duplicate region feature for each related child, with joined attributes (right)

Parameter

Label

Name

Type

Beschreibung

Input Layer

INPUT

[vector: any]

Layer with the relationship that should be de-normalized

Flattened Layer

Optional

OUTPUT

[same as input]

Default: [Create temporary layer]

Specify the output (flattened) layer. One of:

  • Create Temporary Layer (TEMPORARY_OUTPUT)

  • Save to File…

  • Save to Geopackage…

  • Save to Database Table…

The file encoding can also be changed here.

Ausgaben

Label

Name

Type

Beschreibung

Flattened layer

OUTPUT

[same as input]

A layer containing master features with all the attributes for the related features

Python code

Algorithm ID: native:flattenrelationships

import processing
processing.run("algorithm_id", {parameter_dictionary})

The algorithm id is displayed when you hover over the algorithm in the Processing Toolbox. The parameter dictionary provides the parameter NAMEs and values. See Verarbeitung Algorithmen von der Konsole aus verwenden for details on how to run processing algorithms from the Python console.

25.1.17.18. Join attributes by field value

Takes an input vector layer and creates a new vector layer that is an extended version of the input one, with additional attributes in its attribute table.

The additional attributes and their values are taken from a second vector layer. An attribute is selected in each of them to define the join criteria.

Parameter

Label

Name

Type

Beschreibung

Input Layer

INPUT

[vector: any]

Input vector layer. The output layer will consist of the features of this layer with attributes from matching features in the second layer.

Table field

FIELD

[tablefield: any]

Field of the source layer to use for the join

Input layer 2

INPUT_2

[vector: any]

Layer with the attribute table to join

Table field 2

FIELD_2

[tablefield: any]

Field of the second (join) layer to use for the join The type of the field must be equal to (or compatible with) the input table field type.

Layer 2 fields to copy

Optional

FIELDS_TO_COPY

[tablefield: any] [list]

Select the specific fields you want to add. By default all the fields are added.

Join type

METHOD

[enumeration]

Default: 1

The type of the final joined layer. One of:

  • 0 — Create separate feature for each matching feature (one-to-many)

  • 1 — Take attributes of the first matching feature only (one-to-one)

Discard records which could not be joined

DISCARD_NONMATCHING

[boolean]

Default: True

Check if you don’t want to keep the features that could not be joined

Joined field prefix

Optional

PREFIX

[string]

Add a prefix to joined fields in order to easily identify them and avoid field name collision

Joined layer

OUTPUT

[same as input]

Default: [Create temporary layer]

Specify the output vector layer for the join. One of:

  • Create Temporary Layer (TEMPORARY_OUTPUT)

  • Save to File…

  • Save to Geopackage…

  • Save to Database Table…

The file encoding can also be changed here.

Unjoinable features from first layer

NON_MATCHING

[same as input]

Default: [Skip output]

Specify the output vector layer for unjoinable features from first layer. One of:

  • Skip Output

  • Create Temporary Layer (TEMPORARY_OUTPUT)

  • Save to File…

  • Save to Geopackage…

  • Save to Database Table…

The file encoding can also be changed here.

Ausgaben

Label

Name

Type

Beschreibung

Number of joined features from input table

JOINED_COUNT

[number]

Unjoinable features from first layer

Optional

NON_MATCHING

[same as input]

Vector layer with the non-matched features

Joined layer

OUTPUT

[same as input]

Output vector layer with added attributes from the join

Number of unjoinable features from input table

Optional

UNJOINABLE_COUNT

[number]

Python code

Algorithm ID: native:joinattributestable

import processing
processing.run("algorithm_id", {parameter_dictionary})

The algorithm id is displayed when you hover over the algorithm in the Processing Toolbox. The parameter dictionary provides the parameter NAMEs and values. See Verarbeitung Algorithmen von der Konsole aus verwenden for details on how to run processing algorithms from the Python console.

25.1.17.19. Join attributes by location

Takes an input vector layer and creates a new vector layer that is an extended version of the input one, with additional attributes in its attribute table.

The additional attributes and their values are taken from a second vector layer. A spatial criteria is applied to select the values from the second layer that are added to each feature from the first layer.

Default menu: Vector ► Data Management Tools

Exploring spatial relations

Geometrische Prädikate sind boolesche Funktionen, die verwendet werden, um die räumliche Beziehung eines Features zu einem anderen zu bestimmen, indem verglichen wird, ob und wie ihre Geometrien einen Teil des Raums teilen.

../../../../_images/selectbylocation.png

Abb. 25.46 Suche nach räumlichen Beziehungen zwischen Layern

Unter Verwendung der obigen Abbildung suchen wir nach den grünen Kreisen, indem wir sie räumlich mit dem orangefarbenen Rechteck-Feature vergleichen. Verfügbare geometrische Prädikate sind:

Schneidet

Testet, ob eine Geometrie eine andere schneidet. Gibt 1 (wahr) zurück, wenn sich die Geometrien räumlich überschneiden (einen Teil des Raums teilen – überlappen oder berühren) und 0, wenn dies nicht der Fall ist. Im obigen Bild werden die Kreise 1, 2 und 3 zurückgegeben.

Enthält

Gibt 1 (wahr) zurück, wenn und nur wenn keine Punkte von b außerhalb von a liegen und mindestens ein Punkt des Inneren von b innerhalb von a liegt. Im Bild wird kein Kreis zurückgegeben, sondern das Rechteck wäre es, wenn man es umgekehrt suchen würde, da es den Kreis 1 komplett enthält. Das ist das Gegenteil von sind innerhalb.

Getrennt

Gibt 1 (wahr) zurück, wenn die Geometrien keinen Teil des Raums teilen (keine Überlappung, keine Berührung). Nur Kreis 4 wird zurückgegeben.

Gleich

Gibt 1 (wahr) zurück, wenn und nur wenn die Geometrien genau gleich sind. Es werden keine Kreise zurückgegeben.

Berührt

Testet, ob eine Geometrie eine andere berührt. Gibt 1 (wahr) zurück, wenn die Geometrien mindestens einen Punkt gemeinsam haben, aber ihre Innenräume sich nicht schneiden. Nur Kreis 3 wird zurückgegeben.

Überlappt

Testet, ob eine Geometrie eine andere überlappt. Gibt 1 (wahr) zurück, wenn die Geometrien sich den Raum teilen, dieselbe Dimension haben, aber nicht vollständig ineinander liegen. Nur Kreis 2 wird zurückgegeben.

Sind innerhalb

Testet, ob sich eine Geometrie in einer anderen befindet. Gibt 1 (wahr) zurück, wenn sich Geometrie a vollständig innerhalb von Geometrie b befindet. Nur Kreis 1 wird zurückgegeben.

Kreuzen

Gibt 1 (wahr) zurück, wenn die bereitgestellten Geometrien einige, aber nicht alle inneren Punkte gemeinsam haben und die tatsächliche Kreuzung eine geringere Dimension als die höchste bereitgestellte Geometrie hat. Beispielsweise wird eine Linie, die ein Polygon kreuzt, als Linie gekreuzt (wahr). Zwei Linien, die sich kreuzen, kreuzen sich als Punkt (wahr). Zwei Polygone kreuzen sich als Polygon (falsch). Im Bild werden keine Kreise zurückgegeben.

Parameter

Label

Name

Type

Beschreibung

Input Layer

INPUT

[vector: any]

Input vector layer. The output layer will consist of the features of this layer with attributes from matching features in the second layer.

Join layer

JOIN

[vector: any]

The attributes of this vector layer will be added to the source layer attribute table.

Geometric predicate

PREDICATE

[enumeration] [list]

Default: [0]

Select the geometric criteria. One or more of:

  • 0 — intersects

  • 1 — contains

  • 2 — equals

  • 3 — touches

  • 4 — overlaps

  • 5 — within

  • 6 — crosses

Fields to add (leave empty to use all fields)

Optional

JOIN_FIELDS

[tablefield: any] [list]

Select the specific fields you want to add. By default all the fields are added.

Join type

METHOD

[enumeration]

The type of the final joined layer. One of:

  • 0 — Create separate feature for each matching feature (one-to-many)

  • 1 — Take attributes of the first matching feature only (one-to-one)

  • 2 — Take attributes of the feature with largest overlap only (one-to-one)

Discard records which could not be joined

DISCARD_NONMATCHING

[boolean]

Default: False

Remove from the output the input layer records which could not be joined

Joined field prefix

Optional

PREFIX

[string]

Add a prefix to joined fields in order to easily identify them and avoid field name collision

Joined layer

OUTPUT

[same as input]

Default: [Create temporary layer]

Specify the output vector layer for the join. One of:

  • Create Temporary Layer (TEMPORARY_OUTPUT)

  • Save to File…

  • Save to Geopackage…

  • Save to Database Table…

The file encoding can also be changed here.

Unjoinable features from first layer

NON_MATCHING

[same as input]

Default: [Skip output]

Specify the output vector layer for unjoinable features from first layer. One of:

  • Skip Output

  • Create Temporary Layer (TEMPORARY_OUTPUT)

  • Save to File…

  • Save to Geopackage…

  • Save to Database Table…

The file encoding can also be changed here.

Ausgaben

Label

Name

Type

Beschreibung

Number of joined features from input table

JOINED_COUNT

[number]

Unjoinable features from first layer

Optional

NON_MATCHING

[same as input]

Vector layer of the non-matched features

Joined layer

OUTPUT

[same as input]

Output vector layer with added attributes from the join

Python code

Algorithm ID: native:joinattributesbylocation

import processing
processing.run("algorithm_id", {parameter_dictionary})

The algorithm id is displayed when you hover over the algorithm in the Processing Toolbox. The parameter dictionary provides the parameter NAMEs and values. See Verarbeitung Algorithmen von der Konsole aus verwenden for details on how to run processing algorithms from the Python console.

25.1.17.20. Join attributes by location (summary)

Takes an input vector layer and creates a new vector layer that is an extended version of the input one, with additional attributes in its attribute table.

The additional attributes and their values are taken from a second vector layer. A spatial criteria is applied to select the values from the second layer that are added to each feature from the first layer.

The algorithm calculates a statistical summary for the values from matching features in the second layer (e.g. maximum value, mean value, etc).

Exploring spatial relations

Geometrische Prädikate sind boolesche Funktionen, die verwendet werden, um die räumliche Beziehung eines Features zu einem anderen zu bestimmen, indem verglichen wird, ob und wie ihre Geometrien einen Teil des Raums teilen.

../../../../_images/selectbylocation.png

Abb. 25.47 Suche nach räumlichen Beziehungen zwischen Layern

Unter Verwendung der obigen Abbildung suchen wir nach den grünen Kreisen, indem wir sie räumlich mit dem orangefarbenen Rechteck-Feature vergleichen. Verfügbare geometrische Prädikate sind:

Schneidet

Testet, ob eine Geometrie eine andere schneidet. Gibt 1 (wahr) zurück, wenn sich die Geometrien räumlich überschneiden (einen Teil des Raums teilen – überlappen oder berühren) und 0, wenn dies nicht der Fall ist. Im obigen Bild werden die Kreise 1, 2 und 3 zurückgegeben.

Enthält

Gibt 1 (wahr) zurück, wenn und nur wenn keine Punkte von b außerhalb von a liegen und mindestens ein Punkt des Inneren von b innerhalb von a liegt. Im Bild wird kein Kreis zurückgegeben, sondern das Rechteck wäre es, wenn man es umgekehrt suchen würde, da es den Kreis 1 komplett enthält. Das ist das Gegenteil von sind innerhalb.

Getrennt

Gibt 1 (wahr) zurück, wenn die Geometrien keinen Teil des Raums teilen (keine Überlappung, keine Berührung). Nur Kreis 4 wird zurückgegeben.

Gleich

Gibt 1 (wahr) zurück, wenn und nur wenn die Geometrien genau gleich sind. Es werden keine Kreise zurückgegeben.

Berührt

Testet, ob eine Geometrie eine andere berührt. Gibt 1 (wahr) zurück, wenn die Geometrien mindestens einen Punkt gemeinsam haben, aber ihre Innenräume sich nicht schneiden. Nur Kreis 3 wird zurückgegeben.

Überlappt

Testet, ob eine Geometrie eine andere überlappt. Gibt 1 (wahr) zurück, wenn die Geometrien sich den Raum teilen, dieselbe Dimension haben, aber nicht vollständig ineinander liegen. Nur Kreis 2 wird zurückgegeben.

Sind innerhalb

Testet, ob sich eine Geometrie in einer anderen befindet. Gibt 1 (wahr) zurück, wenn sich Geometrie a vollständig innerhalb von Geometrie b befindet. Nur Kreis 1 wird zurückgegeben.

Kreuzen

Gibt 1 (wahr) zurück, wenn die bereitgestellten Geometrien einige, aber nicht alle inneren Punkte gemeinsam haben und die tatsächliche Kreuzung eine geringere Dimension als die höchste bereitgestellte Geometrie hat. Beispielsweise wird eine Linie, die ein Polygon kreuzt, als Linie gekreuzt (wahr). Zwei Linien, die sich kreuzen, kreuzen sich als Punkt (wahr). Zwei Polygone kreuzen sich als Polygon (falsch). Im Bild werden keine Kreise zurückgegeben.

Parameter

Label

Name

Type

Beschreibung

Input Layer

INPUT

[vector: any]

Input vector layer. The output layer will consist of the features of this layer with attributes from matching features in the second layer.

Join layer

JOIN

[vector: any]

The attributes of this vector layer will be added to the source layer attribute table.

Geometric predicate

PREDICATE

[enumeration] [list]

Default: [0]

Select the geometric criteria. One or more of:

  • 0 — intersects

  • 1 — contains

  • 2 — equals

  • 3 — touches

  • 4 — overlaps

  • 5 — within

  • 6 — crosses

Fields to summarize (leave empty to use all fields)

Optional

JOIN_FIELDS

[tablefield: any] [list]

Select the specific fields you want to add and summarize. By default all the fields are added.

Summaries to calculate (leave empty to use all fields)

Optional

SUMMARIES

[enumeration] [list]

Default: []

Choose which type of summary you want to add to each field and for each feature. One or more of:

  • 0 — count

  • 1 — unique

  • 2 — min

  • 3 — max

  • 4 — range

  • 5 — sum

  • 6 — mean

  • 7 — median

  • 8 — stddev

  • 9 — minority

  • 10 — majority

  • 11 — q1

  • 12 — q3

  • 13 — iqr

  • 14 — empty

  • 15 — filled

  • 16 — min_length

  • 17 — max_length

  • 18 — mean_length

Discard records which could not be joined

DISCARD_NONMATCHING

[boolean]

Default: False

Remove from the output the input layer records which could not be joined

Joined layer

OUTPUT

[same as input]

Default: [Create temporary layer]

Specify the output vector layer for the join. One of:

  • Create Temporary Layer (TEMPORARY_OUTPUT)

  • Save to File…

  • Save to Geopackage…

  • Save to Database Table…

The file encoding can also be changed here.

Ausgaben

Label

Name

Type

Beschreibung

Joined layer

OUTPUT

[same as input]

Output vector layer with summarized attributes from the join

Python code

Algorithm ID: qgis:joinbylocationsummary

import processing
processing.run("algorithm_id", {parameter_dictionary})

The algorithm id is displayed when you hover over the algorithm in the Processing Toolbox. The parameter dictionary provides the parameter NAMEs and values. See Verarbeitung Algorithmen von der Konsole aus verwenden for details on how to run processing algorithms from the Python console.

25.1.17.21. Join attributes by nearest

Takes an input vector layer and creates a new vector layer with additional fields in its attribute table. The additional attributes and their values are taken from a second vector layer. Features are joined by finding the closest features from each layer.

By default only the nearest feature is joined, but the join can also join to the k-nearest neighboring features.

If a maximum distance is specified, only features which are closer than this distance will be matched.

Parameter

Label

Name

Type

Beschreibung

Input layer

INPUT

[vector: any]

The input layer.

Input layer 2

INPUT_2

[vector: any]

The join layer.

Layer 2 fields to copy (leave empty to copy all fields)

FIELDS_TO_COPY

[fields]

Join layer fields to copy (if empty, all fields will be copied).

Discard records which could not be joined

DISCARD_NONMATCHING

[boolean]

Default: False

Remove from the output the input layer records which could not be joined

Joined field prefix

PREFIX

[string]

Joined field prefix

Maximum nearest neighbors

NEIGHBORS

[number]

Default: 1

Maximum number of nearest neighbors

Maximum distance

MAX_DISTANCE

[number]

Maximum search distance

Joined layer

OUTPUT

[same as input]

Default: [Create temporary layer]

Specify the vector layer containing the joined features. One of:

  • Create Temporary Layer (TEMPORARY_OUTPUT)

  • Save to File…

  • Save to Geopackage…

  • Save to Database Table…

The file encoding can also be changed here.

Unjoinable features from first layer

NON_MATCHING

[same as input]

Default: [Skip output]

Specify the vector layer containing the features that could not be joined. One of:

  • Skip Output

  • Create Temporary Layer (TEMPORARY_OUTPUT)

  • Save to File…

  • Save to Geopackage…

  • Save to Database Table…

The file encoding can also be changed here.

Ausgaben

Label

Name

Type

Beschreibung

Joined layer

OUTPUT

[same as input]

The output joined layer.

Unjoinable features from first layer

NON_MATCHING

[same as input]

Layer containing the features from first layer that could not be joined to any features in the join layer.

Number of joined features from input table

JOINED_COUNT

[number]

Number of features from the input table that have been joined.

Number of unjoinable features from input table

UNJOINABLE_COUNT

[number]

Number of features from the input table that could not be joined.

Python code

Algorithm ID: native:joinbynearest

import processing
processing.run("algorithm_id", {parameter_dictionary})

The algorithm id is displayed when you hover over the algorithm in the Processing Toolbox. The parameter dictionary provides the parameter NAMEs and values. See Verarbeitung Algorithmen von der Konsole aus verwenden for details on how to run processing algorithms from the Python console.

25.1.17.22. Merge vector layers

Combines multiple vector layers of the same geometry type into a single one.

The attribute table of the resulting layer will contain the fields from all input layers. If fields with the same name but different types are found then the exported field will be automatically converted into a string type field. New fields storing the original layer name and source are also added.

If any input layers contain Z or M values, then the output layer will also contain these values. Similarly, if any of the input layers are multi-part, the output layer will also be a multi-part layer.

Optionally, the destination coordinate reference system (CRS) for the merged layer can be set. If it is not set, the CRS will be taken from the first input layer. All layers will be reprojected to match this CRS.

../../../../_images/merge_vector_layers.png

Default menu: Vector ► Data Management Tools

Siehe auch

Split vector layer

Parameter

Label

Name

Type

Beschreibung

Input Layers

LAYERS

[vector: any] [list]

The layers that are to be merged into a single layer. Layers should be of the same geometry type.

Destination CRS

Optional

CRS

[crs]

Choose the CRS for the output layer. If not specified, the CRS of the first input layer is used.

Merged

OUTPUT

[same as input]

Default: [Create temporary layer]

Specify the output vector layer. One of:

  • Create Temporary Layer (TEMPORARY_OUTPUT)

  • Save to File…

  • Save to Geopackage…

  • Save to Database Table…

The file encoding can also be changed here.

Ausgaben

Label

Name

Type

Beschreibung

Merged

OUTPUT

[same as input]

Output vector layer containing all the features and attributes from the input layers.

Python code

Algorithm ID: native:mergevectorlayers

import processing
processing.run("algorithm_id", {parameter_dictionary})

The algorithm id is displayed when you hover over the algorithm in the Processing Toolbox. The parameter dictionary provides the parameter NAMEs and values. See Verarbeitung Algorithmen von der Konsole aus verwenden for details on how to run processing algorithms from the Python console.

25.1.17.23. Order by expression

Sorts a vector layer according to an expression: changes the feature index according to an expression.

Be careful, it might not work as expected with some providers, the order might not be kept every time.

Parameter

Label

Name

Type

Beschreibung

Input Layer

INPUT

[vector: any]

Input vector layer to sort

Expression

EXPRESSION

[expression]

Expression to use for the sorting

Sort ascending

ASCENDING

[boolean]

Default: True

If checked the vector layer will be sorted from small to large values.

Sort nulls first

NULLS_FIRST

[boolean]

Default: False

If checked, Null values are placed first

Ordered

OUTPUT

[same as input]

Default: [Create temporary layer]

Specify the output vector layer. One of:

  • Create Temporary Layer (TEMPORARY_OUTPUT)

  • Save to File…

  • Save to Geopackage…

  • Save to Database Table…

The file encoding can also be changed here.

Ausgaben

Label

Name

Type

Beschreibung

Ordered

OUTPUT

[same as input]

Output (sorted) vector layer

Python code

Algorithm ID: native:orderbyexpression

import processing
processing.run("algorithm_id", {parameter_dictionary})

The algorithm id is displayed when you hover over the algorithm in the Processing Toolbox. The parameter dictionary provides the parameter NAMEs and values. See Verarbeitung Algorithmen von der Konsole aus verwenden for details on how to run processing algorithms from the Python console.

25.1.17.24. Repair Shapefile

Repairs a broken ESRI Shapefile dataset by (re)creating the SHX file.

Parameter

Label

Name

Type

Beschreibung

Input Shapefile

INPUT

[file]

Full path to the ESRI Shapefile dataset with a missing or broken SHX file

Ausgaben

Label

Name

Type

Beschreibung

Repaired layer

OUTPUT

[vector: any]

The input vector layer with the SHX file repaired

Python code

Algorithm ID: native:repairshapefile

import processing
processing.run("algorithm_id", {parameter_dictionary})

The algorithm id is displayed when you hover over the algorithm in the Processing Toolbox. The parameter dictionary provides the parameter NAMEs and values. See Verarbeitung Algorithmen von der Konsole aus verwenden for details on how to run processing algorithms from the Python console.

25.1.17.25. Reproject layer

Reprojects a vector layer in a different CRS. The reprojected layer will have the same features and attributes of the input layer.

checkbox Allows features in-place modification

Parameter

Label

Name

Type

Beschreibung

Input Layer

INPUT

[vector: any]

Input vector layer to reproject

Target CRS

TARGET_CRS

[crs]

Default: EPSG:4326 - WGS 84

Destination coordinate reference system

Coordinate Operation

Optional

OPERATION

[string]

Specific operation to use for a particular reprojection task, instead of always forcing use of the current project’s transformation settings. Useful when reprojecting a particular layer and control over the exact transformation pipeline is required. Requires proj version >= 6.

Read more at Datum Transformations.

Reprojected

OUTPUT

[same as input]

Default: [Create temporary layer]

Specify the output vector layer. One of:

  • Create Temporary Layer (TEMPORARY_OUTPUT)

  • Save to File…

  • Save to Geopackage…

  • Save to Database Table…

The file encoding can also be changed here.

Ausgaben

Label

Name

Type

Beschreibung

Reprojected

OUTPUT

[same as input]

Output (reprojected) vector layer

Python code

Algorithm ID: native:reprojectlayer

import processing
processing.run("algorithm_id", {parameter_dictionary})

The algorithm id is displayed when you hover over the algorithm in the Processing Toolbox. The parameter dictionary provides the parameter NAMEs and values. See Verarbeitung Algorithmen von der Konsole aus verwenden for details on how to run processing algorithms from the Python console.

25.1.17.26. Save vector features to file

Saves vector features to a specified file dataset.

For dataset formats supporting layers, an optional layer name parameter can be used to specify a custom string. Optional GDAL-defined dataset and layer options can be specified. For more information on this, read the online GDAL documentation on the format.

Parameter

Basic parameters

Label

Name

Type

Beschreibung

Vector features

INPUT

[vector: any]

Input vector layer.

Saved features

OUTPUT

[same as input]

Default: [Save to temporary file]

Specify the file to save the features to. One of:

  • Save to a Temporary File

  • Save to File…

Advanced parameters

Label

Name

Type

Beschreibung

Layer name

Optional

LAYER_NAME

[string]

Name to use for the output layer

GDAL dataset options

Optional

DATASOURCE_OPTIONS

[string]

GDAL dataset creation options of the output format. Separate individual options with semicolons.

GDAL layer options

Optional

LAYER_OPTIONS

[string]

GDAL layer creation options of the output format. Separate individual options with semicolons.

Ausgaben

Label

Name

Type

Beschreibung

Saved features

OUTPUT

[same as input]

Vector layer with the saved features.

File name and path

FILE_PATH

[string]

Output file name and path.

Layer name

LAYER_NAME

[string]

Name of the layer, if any.

Python code

Algorithm ID: native:savefeatures

import processing
processing.run("algorithm_id", {parameter_dictionary})

The algorithm id is displayed when you hover over the algorithm in the Processing Toolbox. The parameter dictionary provides the parameter NAMEs and values. See Verarbeitung Algorithmen von der Konsole aus verwenden for details on how to run processing algorithms from the Python console.

25.1.17.27. Set layer encoding

Sets the encoding used for reading a layer’s attributes. No permanent changes are made to the layer, rather it affects only how the layer is read during the current session.

Bemerkung

Changing the encoding is only supported for some vector layer data sources.

Parameter

Label

Name

Type

Beschreibung

Saved features

INPUT

[vector: any]

Vector layer to set the encoding.

Encoding

ENCODING

[string]

Text encoding to assign to the layer in the current QGIS session.

Ausgaben

Label

Name

Type

Beschreibung

Output layer

OUTPUT

[same as input]

Input vector layer with the set encoding.

Python code

Algorithm ID: native:setlayerencoding

import processing
processing.run("algorithm_id", {parameter_dictionary})

The algorithm id is displayed when you hover over the algorithm in the Processing Toolbox. The parameter dictionary provides the parameter NAMEs and values. See Verarbeitung Algorithmen von der Konsole aus verwenden for details on how to run processing algorithms from the Python console.

25.1.17.28. Split features by character

Features are split into multiple output features by splitting a field’s value at a specified character. For instance, if a layer contains features with multiple comma separated values contained in a single field, this algorithm can be used to split these values up across multiple output features. Geometries and other attributes remain unchanged in the output. Optionally, the separator string can be a regular expression for added flexibility.

Parameter

Label

Name

Type

Beschreibung

Input Layer

INPUT

[vector: any]

Input vector layer

Split using values in the field

FIELD

[tablefield: any]

Field to use for splitting

Split value using character

CHAR

[string]

Character to use for splitting

Use regular expression separator

REGEX

[boolean]

Default: False

Split

OUTPUT

[same as input]

Default: Create temporary layer

Specify output vector layer. One of:

  • Create Temporary Layer (TEMPORARY_OUTPUT)

  • Save to File…

  • Save to Geopackage…

  • Save to Database Table…

The file encoding can also be changed here.

Ausgaben

Label

Name

Type

Beschreibung

Split

OUTPUT

[same as input]

The output vector layer.

Python code

Algorithm ID: native:splitfeaturesbycharacter

import processing
processing.run("algorithm_id", {parameter_dictionary})

The algorithm id is displayed when you hover over the algorithm in the Processing Toolbox. The parameter dictionary provides the parameter NAMEs and values. See Verarbeitung Algorithmen von der Konsole aus verwenden for details on how to run processing algorithms from the Python console.

25.1.17.29. Split vector layer

Creates a set of vectors in an output folder based on an input layer and an attribute. The output folder will contain as many layers as the unique values found in the desired field.

The number of files generated is equal to the number of different values found for the specified attribute.

It is the opposite operation of merging.

Default menu: Vector ► Data Management Tools

Siehe auch

Merge vector layers

Parameter

Basic parameters

Label

Name

Type

Beschreibung

Input Layer

INPUT

[vector: any]

Input vector layer

Unique ID field

FIELD

[tablefield: any]

Field to use for splitting

Output directory

OUTPUT

[folder]

Default: [Save to temporary folder]

Specify the directory for the output layers. One of:

  • Save to a Temporary Directory

  • Save to Directory

Advanced parameters

Label

Name

Type

Beschreibung

Output file type

Optional

FILE_TYPE

[enumeration]

Default: gpkg in the dialog window

Select the extension of the output files. If not specified or invalid, the output files format will be the one set in the „Default output vector layer extension“ Processing setting.

Ausgaben

Label

Name

Type

Beschreibung

Output directory

OUTPUT

[folder]

The directory for the output layers

Output layers

OUTPUT_LAYERS

[same as input] [list]

The output vector layers resulting from the split.

Python code

Algorithm ID: native:splitvectorlayer

import processing
processing.run("algorithm_id", {parameter_dictionary})

The algorithm id is displayed when you hover over the algorithm in the Processing Toolbox. The parameter dictionary provides the parameter NAMEs and values. See Verarbeitung Algorithmen von der Konsole aus verwenden for details on how to run processing algorithms from the Python console.

25.1.17.30. Truncate table

Truncates a layer, by deleting all features from within the layer.

Warnung

This algorithm modifies the layer in place, and deleted features cannot be restored!

Parameter

Label

Name

Type

Beschreibung

Input Layer

INPUT

[vector: any]

Input vector layer

Ausgaben

Label

Name

Type

Beschreibung

Truncated layer

OUTPUT

[folder]

The truncated (empty) layer

Python code

Algorithm ID: native:truncatetable

import processing
processing.run("algorithm_id", {parameter_dictionary})

The algorithm id is displayed when you hover over the algorithm in the Processing Toolbox. The parameter dictionary provides the parameter NAMEs and values. See Verarbeitung Algorithmen von der Konsole aus verwenden for details on how to run processing algorithms from the Python console.