19.2.2. Das Kartenelement
The map item is the main frame that displays the map you’ve designed in the map canvas. Use the Add Map tool following items creation instructions to add a new map item that you can later manipulate the same way as exposed in Interacting with layout items.
By default, a new map item shows the current status of the map canvas with its extent and visible layers. You can customize it thanks to the Item Properties panel. Other than the items common properties, this feature has the following functionalities:
The Map Item Properties panel embeds a toolbar with the following functionalities:
set a Margin from map edges, a data definable distance from the map item’s limits inside which no label should be displayed
Allow truncated labels on edges of map: controls whether labels which fall partially outside of the map item allowed extent should be rendered. If checked, these labels will be shown (when there’s no way to place them fully within the visible area). If unchecked then partially visible labels will be skipped.
Label blocking items: allows other layout items (such as scalebars, north arrows, inset maps, etc) to be marked as a blockers for the map labels in the active map item. This prevents any map labels from being placed under those items - causing the labeling engine to either try alternative placement for these labels or discard them altogether.
If a Margin from map edges is set, the map labels are not placed closer than the specified distance from the checked layout items.
Show unplaced labels: can be used to determine whether labels are missing from the layout map (e.g. due to conflicts with other map labels or due to insufficient space to place the label) by highlighting them in a predefined color.
Clip to atlas feature: you can determine that the layout map item will be clipped automatically to the current atlas feature.
There are different clipping modes available:
Clip During Render Only: applies a painter based clip, so that portions of vector features which sit outside the atlas feature become invisible
Clip Feature Before Render: applies the clip before rendering features, so borders of features which fall partially outside the atlas feature will still be visible on the boundary of the atlas feature
Render Intersecting Features Unchanged: renders all features which intersect the current atlas feature, but without clipping their their geometry.
Clip to item: it is possible to change the shape of the map item by using a shape or polygon item from the print layout. When you enable this option the map will be automatically clipped to the selected shape in the combobox. Again, the above mentioned clipping modes are available and labels can be forced to display only inside the clipping shape.
In the Main properties group (see Abb. 19.14) of the map Item Properties panel, available options are:
The Update Preview button to refresh the map item rendering if the view in map canvas has been modified. Note that most of the time, the map item refresh is automatically triggered by the changes;
The Scale to manually set the map item scale;
The Map rotation allows you to rotate the map item content clockwise in degrees. The rotation of the map canvas can be imitated here;
The CRS allows you to display the map item content in any CRS. It defaults to
Use project CRS;
Draw map canvas items lets you show in the print layout annotations that are placed on the main map canvas.
By default, map item appearance is synced with the map canvas rendering meaning that toggling visibility of the layers or modifying their style in the Layers Panel is automatically applied to the map item. Because, like any other item, you may want to add multiple map items to a print layout, there’s a need to break this synchronization in order to allow showing different areas, layer combinations, at different scales… The Layers properties group (see Abb. 19.16) helps you do that.
If you want to keep the map item consistent with an existing map theme, check Follow map theme and select the desired theme in the drop-down list. Any changes applied to the theme in QGIS‘ main window (using the replace theme function) will automatically affect the map item. If a map theme is selected, the Lock styles for layers option is disabled because Follow map theme also updates the style (symbology, labels, diagrams) of the layers.
To lock the layers shown in a map item to the current map canvas visibility, check Lock layers. When this option is enabled, any changes on the layers‘ visibility in QGIS‘ main window will not affect the layout’s map item. Nevertheless, style and labels of locked layers are still refreshed according to QGIS‘ main window. You can prevent this by using Lock styles for layers.
Instead of using the current map canvas, you can also lock the layers of the map item to those of an existing map theme: select a map theme from the Set layer list from a map theme drop-down button, and the Lock layers is activated. The set of visible layers in the map theme is from now on used for the map item until you select another map theme or uncheck the Lock layers option. You then may need to refresh the view using the Refresh view button of the Navigation toolbar or the Update Preview button seen above.
Note that, unlike the Follow map theme option, if the Lock layers option is enabled and set to a map theme, the layers in the map item will not be refreshed even if the map theme is updated (using the replace theme function) in QGIS‘ main window.
Locked layers in the map item can also be data-defined,
using the icon beside the option. When used, this overrides the
selection set in the drop-down list. You need to pass a list of layers
The following example locks the map item to use only layers
layer 1 and
concat ('layer 1', '|', 'layer 2')
The Extents group of the map item properties panel provides the following functionalities (see Abb. 19.17):
The Extents area displays
Y coordinates of the area shown
in the map item. Each of these values can be manually replaced, modifying the
map canvas area displayed and/or map item size.
The extent can also be modified using tools at the top of the map item panel
You can also alter a map item extent using the Move item content tool: click-and-drag within the map item to modify its current view, keeping the same scale. With the tool enabled, use the mouse wheel to zoom in or out, modifying the scale of the shown map. Combine the movement with Ctrl key pressed to have a smaller zoom.
The Temporal range group of the map item properties panel provides the options to control layers rendering in the map item based on a temporal range. Only layers whose temporal properties overlap with the time range set by the Start and End dates are displayed in the map item.
The associated data-defined widgets help make the time range dynamic, and allow outputting temporal atlases, i.e. automated maps with fixed spatial extent and whose contents vary based on time. For example, using as coverage layer a csv file with a start and end pair of fields and a number of rows representing date ranges, enable both the temporal range and control by atlas in the map item properties and hit atlas export.
The Controlled by atlas group properties is available only if an atlas is active in the print layout. Check this option if you want the map item being ruled by the atlas; when iterating over the coverage layer, the map item extent is panned/zoomed to the atlas feature following:
Margin around features: zooms to the feature at the best scale, keeping around each a margin representing a percentage of the map item width or height. The margin can be the same for all features or set variable, e.g., depending on map scale;
Predefined scale (best fit): zooms to the feature at the project predefined scale where the atlas feature best fits;
Fixed scale: atlas features are panned from one to another, keeping the same scale of the map item. Ideal when working with features of same size (e.g., a grid) or willing to highlight size differences among atlas features.
With grids, you can add, over your map, information relative to its extent or coordinates, either in the map item projection or a different one. The Grids group provides the possibility to add several grids to a map item.
Double-click the added grid to rename it.
To modify a grid, select it and press the Modify Grid… button to open the Map Grid Properties panel and access its configuration options.
As grid type, you can specify to use a:
Cross: displays segment at the grid lines intersection for which you can set the Line style and the Cross width;
Markers: only displays customizable markers symbol at grid lines intersection;
or Frame and annotations only.
Other than the grid type, you can define:
the CRS of the grid. If not changed, it will follow the Map CRS. The Change button lets you set it to a different CRS. Once set, it can be changed back to default by selecting any group heading (e.g Geographic Coordinate System) under Predefined Coordinate Reference Systems in the CRS selection dialog.
the Interval type to use for the grid references. Available options are
Fit Segment Width,
Fit Segment Widthwill dynamically select the grid interval based on the map extent to a „pretty“ interval. When selected, the
Maximumintervals can be set.
the other options allow you to set the distance between two consecutive grid references in the
the Offset from the map item edges, in the
and the Blend mode of the grid (see Mischmodi) when compatible.
There are different options to style the frame that holds the map.
The following options are available:
Interior and Exterior ticks,
Line border and
Line border (nautical).
When compatible, it’s possible to set the Frame size, a Frame margin, the Frame line thickness with associated color and the Frame fill colors.
Latitude/Y only and
Longitude/X only values in the divisions
section you can prevent a mix of latitude/Y and longitude/X coordinates showing
on each side when working with rotated maps or reprojected grids.
Also you can choose to set visible or not each side of the grid frame.
The Draw coordinates checkbox allows you to add coordinates to the map frame. You can choose the annotation numeric format, the options range from decimal to degrees, minute and seconds, with or without suffix, aligned or not and a custom format using the expression dialog.
You can choose which annotation to show. The options are: show all, latitude only, longitude only, or disable(none). This is useful when the map is rotated. The annotation can be drawn inside or outside the map frame. The annotation direction can be defined as horizontal, vertical ascending or vertical descending.
Finally, you can define the annotation font, font color, distance from the map frame and the precision of the drawn coordinates.
Sometimes you may have more than one map in the print layout and would like to locate the study area of one map item on another one. This could be for example to help map readers identify the area in relation with its larger geographic context shown in the second map.
The Overviews group of the map panel helps you create the link between two different maps extent and provides the following functionalities:
To create an overview, select the map item on which you want to show the other map item’s extent and expand the Overviews option in the Item Properties panel. Then press the button to add an overview.
Initially this overview is named ‚Overview 1‘ (see Abb. 19.22). You can:
Rename it with a double-click
With the and buttons, move an overview up and down in the list, placing it above or below other overviews in the map item (when they are at the same stack position).
The Map frame selects the map item whose extents will be shown on the present map item.
The Frame Style uses the symbol properties to render the overview frame.
Der Mischmodus ermöglicht verschiedene Transparenzmischmodi einzustellen.
The Invert overview creates a mask around the extents when activated: the referenced map extents are shown clearly, whereas the rest of the map item is blended with the frame fill color (if a fill color is used).
The Position controls exactly where in the map item’s layer stack the overview will be placed, e.g. allowing an overview extent to be drawn below some feature layers such as roads whilst drawing it above other background layers. Available options are:
Below map layer and Above map layer: place the overview frame below and above the geometries of a layer, respectively. The layer is selected in the Stacking layer option.
Below map labels: given that labels are always rendered above all the feature geometries in a map item, places the overview frame above all the geometries and below any label.
Above map labels: places the overview frame above all the geometries and labels in the map item.