13.3. Exploring Data Formats and Fields¶
GIS raster data are matrices of discrete cells that represent features / phenomena on, above or below the earth’s surface. Each cell in the raster grid has the same size, and cells are usually rectangular (in QGIS they will always be rectangular). Typical raster datasets include remote sensing data, such as aerial photography, or satellite imagery and modelled data, such as elevation or temperature.
Unlike vector data, raster data typically do not have an associated database record for each cell. They are geocoded by pixel resolution and the X/Y coordinate of a corner pixel of the raster layer. This allows QGIS to position the data correctly on the map canvas.
The GeoPackage format is convenient for storing raster data when working with QGIS. The popular and powerful GeoTiff format is a good alternative.
QGIS makes use of georeference information inside the raster layer (e.g., GeoTiff) or an associated world file to properly display the data.
Many of the features and tools available in QGIS work the same, regardless the vector data source. However, because of the differences in format specifications (GeoPackage, ESRI Shapefile, MapInfo and MicroStation file formats, AutoCAD DXF, PostGIS, SpatiaLite, DB2, Oracle Spatial, MSSQL Spatial databases, and many more), QGIS may handle some of their properties differently. Support is provided by the OGR Simple Feature Library. This section describes how to work with these specificities.
QGIS supports (multi)point, (multi)line, (multi)polygon, CircularString, CompoundCurve, CurvePolygon, MultiCurve, MultiSurface feature types, all optionally with Z and/or M values.
You should also note that some drivers don’t support some of these feature types, like CircularString, CompoundCurve, CurvePolygon, MultiCurve, MultiSurface feature type. QGIS will convert them.
The GeoPackage (GPKG) format is platform-independent, and is implemented as a SQLite database container, and can be used to store both vector and raster data. The format was defined by the Open Geospatial Consortium (OGC), and was published in 2014.
GeoPackage can be used to store the following in a SQLite database:
tile matrix sets of imagery and raster maps
attributes (non-spatial data)
Since QGIS version 3.8, GeoPackage can also store QGIS projects. GeoPackage layers can have JSON fields.
GeoPackage is the default format for vector data in QGIS.
The ESRI Shapefile format is still one of the most used vector file formats, even if it has some limitations compared to for instance GeoPackage and SpatiaLite.
An ESRI Shapefile format dataset consists of several files. The following three are required:
.shpfile containing the feature geometries
.dbffile containing the attributes in dBase format
An ESRI Shapefile format dataset can also include a file with a
.prj suffix, which contains projection information.
While it is very useful to have a projection file, it is not
A Shapefile format dataset can contain additional files.
For further details, see the the ESRI technical specification at
GDAL 3.1 has read-write support for compressed ESRI Shapefile
Improving Performance for ESRI Shapefile format datasets
To improve the drawing performance for an ESRI Shapefile format
dataset, you can create a spatial index.
A spatial index will improve the speed of both zooming and panning.
Spatial indexes used by QGIS have a
Use these steps to create the index:
Load an ESRI Shapefile format dataset (see The Browser Panel)
Open the Layer Properties dialog by double-clicking on the layer name in the legend or by right-clicking and choosing from the context menu
In the Source tab, click the Create Spatial Index button
Problem loading a .prj file
If you load an ESRI Shapefile format dataset with a
and QGIS is not able to read the coordinate reference system from
that file, you will need to define the proper projection manually in
the tab of the layer by
clicking the Select CRS button.
This is due to the fact that
.prj files often do not provide
the complete projection parameters as used in QGIS and listed in the
For the same reason, if you create a new ESRI Shapefile format dataset
with QGIS, two different projection files are created: a
file with limited projection parameters, compatible with ESRI
software, and a
.qpj file, providing all the parameters of the
Whenever QGIS finds a
.qpj file, it will be used instead of
Delimited text files are very common and widely used because of their simplicity and readability – data can be viewed and edited in a plain text editor. A delimited text file is tabular data with columns separated by a defined character and rows separated by line breaks. The first row usually contains the column names. A common type of delimited text file is a CSV (Comma Separated Values), with columns separated by commas. Delimited text files can also contain positional information (see Storing geometry information in delimited text files).
The file must have a delimited header row of field names. This must be the first line of the data (ideally the first row in the text file).
If geometry should be enabled, the file must contain field(s) that define the geometry. These field(s) can have any name.
The X and Y coordinates fields (if geometry is defined by coordinates) must be specified as numbers. The coordinate system is not important.
If you have a CSV file with non-string columns, you must have an accompanying CSVT file (see section Using CSVT file to control field formatting).
The elevation point data file
elevp.csv in the QGIS sample
dataset (see section Beispieldaten herunterladen) is an example of a
valid text file:
X;Y;ELEV -300120;7689960;13 -654360;7562040;52 1640;7512840;3 [...]
Some things to note about the text file:
The example text file uses
;(semicolon) as delimiter (any character can be used to delimit the fields).
The first row is the header row. It contains the fields
No quotes (
") are used to delimit text fields
The X coordinates are contained in the
The Y coordinates are contained in the
Delimited text files can contain geometry information in two main forms:
As coordinates in separate columns (eg.
Ycol… ), for point geometry data;
As well-known text (WKT) representation of geometry in a single column, for any geometry type.
Features with curved geometries (CircularString, CurvePolygon and CompoundCurve) are supported. Here are some examples of geometry types in a delimited text file with geometries coded as WKT:
Label;WKT_geom LineString;LINESTRING(10.0 20.0, 11.0 21.0, 13.0 25.5) CircularString;CIRCULARSTRING(268 415,227 505,227 406) CurvePolygon;CURVEPOLYGON(CIRCULARSTRING(1 3, 3 5, 4 7, 7 3, 1 3)) CompoundCurve;COMPOUNDCURVE((5 3, 5 13), CIRCULARSTRING(5 13, 7 15, 9 13), (9 13, 9 3), CIRCULARSTRING(9 3, 7 1, 5 3))
Delimited text files also support Z and M coordinates in geometries:
LINESTRINGZ(10.0 20.0 30.0, 11.0 21.0 31.0, 11.0 22.0 30.0)
When loading CSV files, the OGR driver assumes all fields are strings (i.e. text) unless it is told otherwise. You can create a CSVT file to tell OGR (and QGIS) the data type of the different columns:
Date & Time
DateTime (YYYY-MM-DD HH:MM:SS+nn)
The CSVT file is a ONE line plain text file with the data types in quotes and separated by commas, e.g.:
You can even specify width and precision of each column, e.g.:
This file is saved in the same folder as the
.csv file, with
the same name, but
.csvt as the extension.
You can find more information at GDAL CSV Driver.
PostGIS layers are stored in a PostgreSQL database. The advantages of PostGIS are spatial indexing, filtering and querying capabilities. Using PostGIS, vector functions such as select and identify work more accurately than they do with OGR layers in QGIS.
Normally, a PostGIS layer is identified by an entry in the geometry_columns table. QGIS can load layers that do not have an entry in the geometry_columns table. This includes both tables and views. Refer to your PostgreSQL manual for information on creating views.
This section contains some details on how QGIS accesses PostgreSQL layers. Most of the time, QGIS should simply provide you with a list of database tables that can be loaded, and it will load them on request. However, if you have trouble loading a PostgreSQL table into QGIS, the information below may help you understand QGIS messages and give you directions for modifying the PostgreSQL table or view definition to allow QGIS to load it.
QGIS requires that PostgreSQL layers contain a column that can be used as a unique key for the layer. For tables, this usually means that the table needs a primary key, or a column with a unique constraint on it. In QGIS, this column needs to be of type int4 (an integer of size 4 bytes). Alternatively, the ctid column can be used as primary key. If a table lacks these items, the oid column will be used instead. Performance will be improved if the column is indexed (note that primary keys are automatically indexed in PostgreSQL).
QGIS offers a checkbox Select at id that is activated by default. This option gets the ids without the attributes, which is faster in most cases.
If the PostgreSQL layer is a view, the same requirement exists, but views do not always have primary keys or columns with unique constraints on them. You have to define a primary key field (has to be integer) in the QGIS dialog before you can load the view. If a suitable column does not exist in the view, QGIS will not load the layer. If this occurs, the solution is to alter the view so that it does include a suitable column (a type of integer and either a primary key or with a unique constraint, preferably indexed).
As for table, a checkbox Select at id is activated by default (see above for the meaning of the checkbox). It can make sense to disable this option when you use expensive views.
If you want to make a backup of your PostGIS database using the
pg_restore commands, and the default layer
styles as saved by QGIS fail to restore afterwards, you need to set
the XML option to
DOCUMENT before the restore command:
SET XML OPTION DOCUMENT;
QGIS allows to filter features already on server side. Check to do so. Only supported expressions will be sent to the database. Expressions using unsupported operators or functions will gracefully fallback to local evaluation.
Data can be imported into PostgreSQL/PostGIS using several tools, including the DB Manager plugin and the command line tools shp2pgsql and ogr2ogr.
QGIS comes with a core plugin named DB Manager. It can be used to load data, and it includes support for schemas. See section DB Manager Plugin for more information.
PostGIS includes a utility called shp2pgsql, that can be used to import
Shapefile format datasets into a PostGIS-enabled database.
For example, to import a Shapefile format dataset named
lakes.shp into a PostgreSQL database named
the following command:
shp2pgsql -s 2964 lakes.shp lakes_new | psql gis_data
This creates a new layer named
lakes_new in the
The new layer will have a spatial reference identifier (SRID) of 2964.
See section Arbeiten mit Projektionen for more information about spatial
reference systems and projections.
Exporting datasets from PostGIS
There is also a tool for exporting PostGIS datasets to Shapefile format: pgsql2shp. It is shipped within your PostGIS distribution.
In addition to shp2pgsql and DB Manager, there is another tool for feeding geographical data in PostGIS: ogr2ogr. It is part of your GDAL installation.
To import a Shapefile format dataset into PostGIS, do the following:
ogr2ogr -f "PostgreSQL" PG:"dbname=postgis host=myhost.de user=postgres password=topsecret" alaska.shp
This will import the Shapefile format dataset
alaska.shp into the
PostGIS database postgis using the user postgres with the password
topsecret on the host server myhost.de.
ogrinfo --formats | grep -i post
ogr2ogr does not create spatial indexes like shp2pgsl does. You need to create them manually, using the normal SQL command CREATE INDEX afterwards, as an extra step (as described in the next section Improving Performance).
Retrieving features from a PostgreSQL database can be time-consuming, especially over a network. You can improve the drawing performance of PostgreSQL layers by ensuring that a PostGIS spatial index exists on each layer in the database. PostGIS supports creation of a GiST (Generalized Search Tree) index to speed up spatial searching (GiST index information is taken from the PostGIS documentation available at https://postgis.net).
You can use the DBManager to create an index for your layer. You should first select the layer and click on Add Spatial Index., go to tab and click on
The syntax for creating a GiST index is:
CREATE INDEX [indexname] ON [tablename] USING GIST ( [geometryfield] GIST_GEOMETRY_OPS );
Note that for large tables, creating the index can take a long time.
Once the index is created, you should perform a
See the PostGIS documentation (POSTGIS-PROJECT in
Literatur und Internetreferenzen) for more information.
The following example creates a GiST index:
[email protected]:~/current$ psql gis_data Welcome to psql 8.3.0, the PostgreSQL interactive terminal. Type: \copyright for distribution terms \h for help with SQL commands \? for help with psql commands \g or terminate with semicolon to execute query \q to quit gis_data=# CREATE INDEX sidx_alaska_lakes ON alaska_lakes gis_data-# USING GIST (the_geom GIST_GEOMETRY_OPS); CREATE INDEX gis_data=# VACUUM ANALYZE alaska_lakes; VACUUM gis_data=# \q [email protected]:~/current$
Many GIS packages don’t wrap vector maps with a geographic reference system (lat/lon) crossing the 180 degrees longitude line (http://postgis.refractions.net/documentation/manual-2.0/ST_Shift_Longitude.html). As result, if we open such a map in QGIS, we could see two widely separated locations, that should appear near each other. In Abb. 13.23, the tiny point on the far left of the map canvas (Chatham Islands) should be within the grid, to the right of the New Zealand main islands.
A work-around is to transform the longitude values using PostGIS and the ST_Shift_Longitude function. This function reads every point/vertex in every component of every feature in a geometry, and if the longitude coordinate is < 0°, it adds 360° to it. The result is a 0° - 360° version of the data to be plotted in a 180°-centric map.
Import data into PostGIS (Importing Data into PostgreSQL) using, for example, the DB Manager plugin.
Use the PostGIS command line interface to issue the following command (in this example, „TABLE“ is the actual name of your PostGIS table):
gis_data=# update TABLE set the_geom=ST_Shift_Longitude(the_geom);
If everything went well, you should receive a confirmation about the number of features that were updated. Then you’ll be able to load the map and see the difference (Figure_vector_crossing_map).
If you want to save a vector layer using the SpatiaLite format, you
can do this by following instructions at Creating new layers from an existing layer.
SpatiaLite as Format and
enter both File name and Layer name.
Also, you can select
SQLite as format and then add
SPATIALITE=YES in the
This tells GDAL to create a SpatiaLite database.
See also https://gdal.org/drivers/vector/sqlite.html.
QGIS also supports editable views in SpatiaLite. For SpatiaLite data management, you can also use the core plugin DB Manager.
If you want to create a new SpatiaLite layer, please refer to section Creating a new SpatiaLite layer.
When exporting layers to GeoJSON, there are some specific Layer Options available. These options come from GDAL which is responsible for the writing of the file:
COORDINATE_PRECISION the maximum number of digits after the decimal separator to write in coordinates. Defaults to 15 (note: for Lat Lon coordinates 6 is considered enough). Truncation will occur to remove trailing zeros.
RFC7946 by default GeoJSON 2008 will be used. If set to YES, the updated RFC 7946 standard will be used. Default is NO (thus GeoJSON 2008). See https://gdal.org/drivers/vector/geojson.html#rfc-7946-write-support for the main differences, in short: only EPSG:4326 is allowed, other crs’s will be transformed, polygons will be written such as to follow the right-hand rule for orientation, values of a „bbox“ array are [west, south, east, north], not [minx, miny, maxx, maxy]. Some extension member names are forbidden in FeatureCollection, Feature and Geometry objects, the default coordinate precision is 7 decimal digits
WRITE_BBOX set to YES to include the bounding box of the geometries at the feature and feature collection level
Besides GeoJSON there is also an option to export to „GeoJSON - Newline Delimited“ (see https://gdal.org/drivers/vector/geojsonseq.html). Instead of a FeatureCollection with Features, you can stream one type (probably only Features) sequentially separated with newlines.
GeoJSON - Newline Delimited has some specific Layer options availabe too:
COORDINATE_PRECISION see above (same as for GeoJSON)
RS whether to start records with the RS=0x1E character. The difference is how the features are separated: only by a newline (LF) character (Newline Delimited JSON, geojsonl) or by also prepending a record-separator (RS) character (giving GeoJSON Text Sequences, geojsons). Default to NO. Files are given the
.jsonextension if extension is not provided.
IBM DB2 for Linux, Unix and Windows (DB2 LUW), IBM DB2 for z/OS (mainframe) and IBM DashDB products allow users to store and analyse spatial data in relational table columns. The DB2 provider for QGIS supports the full range of visualization, analysis and manipulation of spatial data in these databases.
For more information about working with the DB2 spatial capabilities, check out the DB2 Spatial Tutorial on IBM DeveloperWorks.
The DB2 provider currently only supports the Windows environment through the Windows ODBC driver.
The client running QGIS needs to have one of the following installed:
IBM Data Server Driver Package
IBM Data Server Client
If you are accessing a DB2 LUW database on the same machine or using DB2 LUW as a client, the DB2 executables and supporting files need to be included in the Windows path. This can be done by creating a batch file like the following with the name db2.bat and including it in the directory %OSGEO4W_ROOT%/etc/ini:
@echo off REM Point the following to where DB2 is installed SET db2path=C:\Program Files (x86)\sqllib REM This should usually be ok - modify if necessary SET gskpath=C:\Program Files (x86)\ibm\gsk8 SET Path=%db2path%\BIN;%db2path%\FUNCTION;%gskpath%\lib64;%gskpath%\lib;%path%