3. Services

QGIS Server is able to serve data according to standard protocols as described by the Open Geospatial Consortium (OGC):

  • WMS 1.1.1 and 1.3.0

  • WFS 1.0.0 and 1.1.0

  • OGC API - Features (WFS3)

  • WCS 1.1.1

  • WMTS 1.0.0

Extra vendor parameters and requests are supported in addition to the original standard that greatly enhance the possibilities of customizing its behavior thanks to the QGIS rendering engine.

3.1. Web Map Service (WMS)

The 1.1.1 and 1.3.0 WMS standards implemented in QGIS Server provide a HTTP interface to request map or legend images generated from a QGIS project. A typical WMS request defines the QGIS project to use, the layers to render as well as the image format to generate. Basic support is also available for Styled Layer Descriptor (SLD).

Specifications:

Standard requests provided by QGIS Server:

Request

Tanım

GetCapabilities

Returns XML metadata with information about the server

GetMap

Returns a map

GetFeatureInfo

Retrieves data (geometry and values) for a pixel location

GetLegendGraphics

Returns legend symbols

Vendor requests provided by QGIS Server:

Request

Tanım

GetPrint

Returns a QGIS composition

GetProjectSettings

Returns specific information about QGIS Server

3.1.1. GetMap

Standard parameters for the GetMap request according to the OGC WMS 1.1.1 and 1.3.0 specifications:

Parameter

Gerekli

Tanım

SERVICE

Yes

Name of the service (WMS)

VERSION

Yes

Version of the service

REQUEST

Yes

Name of the request (GetMap)

LAYERS

No

Layers to display

STYLES

No

Layers’ style

SRS / CRS

Yes

Coordinate reference system

BBOX

Yes

Map extent

WIDTH

Yes

Width of the image in pixels

HEIGHT

Yes

Height of the image in pixels

FORMAT

No

Image format

TRANSPARENT

No

Transparent background

SLD

No

URL of an SLD to be used for styling

SLD_BODY

No

In-line SLD (XML) to be used for styling

In addition to the standard ones, QGIS Server supports the following extra parameters:

Parameter

Gerekli

Tanım

MAP

Yes

Specify the QGIS project file

BGCOLOR

No

Specify the background color

DPI

No

Specify the output resolution

IMAGE_QUALITY

No

JPEG compression

OPACITIES

No

Opacity for layer or group

FILTER

No

Subset of features

SELECTION

No

Highlight features

FILE_NAME

No

File name of the downloaded file

Only for FORMAT=application/dxf

FORMAT_OPTIONS

No

Options of the specified file format

Only for FORMAT=application/dxf

TILED

No

Working in tiled mode

URL example:

http://localhost/qgis_server?
SERVICE=WMS
&VERSION=1.3.0
&REQUEST=GetMap
&MAP=/home/qgis/projects/world.qgs
&LAYERS=mylayer1,mylayer2,mylayer3
&STYLES=style1,default,style3
&OPACITIES=125,200,125
&CRS=EPSG:4326
&WIDTH=400
&HEIGHT=400
&FORMAT=image/png
&TRANSPARENT=TRUE
&DPI=300
&TILED=TRUE

SERVICE

This parameter has to be WMS.

For example:

http://localhost/qgisserver?
SERVICE=WMS
&...

VERSION

This parameter allows to specify the version of the service to use. Available values for the VERSION parameter are:

  • 1.1.1

  • 1.3.0

According to the version number, slight differences have to be expected as explained later for the next parameters:

  • CRS / SRS

  • BBOX

REQUEST

This parameter is GetMap in case of the GetMap request.

LAYERS

This parameter allows to specify the layers to display on the map. Names have to be separated by a comma.

In addition, QGIS Server introduced some options to select layers by:

  • a short name

  • the layer id

The short name of a layer may be configured through Properties ► Metadata in layer menu. If the short name is defined, then it’s used by default instead of the layer’s name:

http://localhost/qgisserver?
SERVICE=WMS
&REQUEST=GetMap
&LAYERS=mynickname1,mynickname2
&...

Moreover, there’s a project option allowing to select layers by their id in OWS Server ► WMS capabilities menu of the Project ► Properties… dialog. To activate this option, the checkbox Use layer ids as names has to be selected.

http://localhost/qgisserver?
SERVICE=WMS
&REQUEST=GetMap
&LAYERS=mylayerid1,mylayerid2
&...

STYLES

This parameter can be used to specify a layer’s style for the rendering step. Styles have to be separated by a comma. The name of the default style is default.

SRS / CRS

This parameter allows to indicate the map output Spatial Reference System in WMS 1.1.1 and has to be formed like EPSG:XXXX. Note that CRS is also supported if current version is 1.1.1.

For WMS 1.3.0, CRS parameter is preferable but SRS is also supported.

Note that if both CRS and SRS parameters are indicated in the request, then it’s the current version indicated in VERSION parameter which is decisive.

In the next case, the SRS parameter is kept whatever the VERSION parameter because CRS is not indicated:

http://localhost/qgisserver?
SERVICE=WMS
&REQUEST=GetMap
&VERSION=1.3.0
&SRS=EPSG:2854
&...

In the next case, the SRS parameter is kept instead of CRS because of the VERSION parameter:

http://localhost/qgisserver?
SERVICE=WMS
&REQUEST=GetMap
&VERSION=1.1.1
&CRS=EPSG:4326
&SRS=EPSG:2854
&...

In the next case, the CRS parameter is kept instead of SRS because of the VERSION parameter:

http://localhost/qgisserver?
SERVICE=WMS
&REQUEST=GetMap
&VERSION=1.3.0
&CRS=EPSG:4326
&SRS=EPSG:2854
&...

BBOX

This parameter allows to specify the map extent with units according to the current CRS. Coordinates have to be separated by a comma.

The BBOX parameter is formed like min_a,min_b,max_a,max_b but a and b axis definition is different according to the current VERSION parameter:

  • in WMS 1.1.1, the axis ordering is always east/north

  • in WMS 1.3.0, the axis ordering depends on the CRS authority

For example in case of EPSG:4326 and WMS 1.1.1, a is the longitude (east) and b the latitude (north), leading to a request like:

http://localhost/qgisserver?
SERVICE=WMS
&REQUEST=GetMap
&VERSION=1.1.1
&SRS=epsg:4326
&BBOX=-180,-90,180,90
&...

But in case of WMS 1.3.0, the axis ordering defined in the EPSG database is north/east so a is the latitude and b the longitude:

http://localhost/qgisserver?
SERVICE=WMS
&REQUEST=GetMap
&VERSION=1.3.0
&CRS=epsg:4326
&BBOX=-90,-180,90,180
&...

WIDTH

This parameter allows to specify the width in pixels of the output image.

HEIGHT

This parameter allows to specify the height in pixels of the output image.

FORMAT

This parameter may be used to specify the format of map image. Available values are:

  • jpg

  • jpeg

  • image/jpeg

  • image/png

  • image/png; mode=1bit

  • image/png; mode=8bit

  • image/png; mode=16bit

  • application/dxf Only layers that have read access in the WFS service are exported in the DXF format.

    URL example:

    http://localhost/qgisserver?
SERVICE=WMS&VERSION=1.3.0
&REQUEST=GetMap
&FORMAT=application/dxf
&LAYERS=Haltungen,Normschacht,Spezialbauwerke
&STYLES=
&CRS=EPSG%3A21781&BBOX=696136.28844801,245797.12108743,696318.91114315,245939.25832905
&WIDTH=1042
&HEIGHT=811
&FORMAT_OPTIONS=MODE:SYMBOLLAYERSYMBOLOGY;SCALE:250&FILE_NAME=plan.dxf

TRANSPARENT

This boolean parameter can be used to specify the background transparency. Available values are (not case sensitive):

  • TRUE

  • FALSE

However, this parameter is ignored if the format of the map image indicated with FORMAT is different from PNG.

MAP

This parameter allows to define the QGIS project file to use.

As mentioned in GetMap parameters table, MAP is mandatory because a request needs a QGIS project to actually work. However, the QGIS_PROJECT_FILE environment variable may be used to define a default QGIS project. In this specific case, MAP is not longer a required parameter. For further information you may refer to Advanced configuration.

BGCOLOR

This parameter allows to indicate a background color for the map image. However it cannot be combined with TRANSPARENT parameter in case of PNG images (transparency takes priority). The colour may be literal or in hexadecimal notation.

URL example with the literal notation:

http://localhost/qgisserver?
SERVICE=WMS
&REQUEST=GetMap
&VERSION=1.3.0
&BGCOLOR=green
&...

URL example with the hexadecimal notation:

http://localhost/qgisserver?
SERVICE=WMS
&REQUEST=GetMap
&VERSION=1.3.0
&BGCOLOR=0x00FF00
&...

DPI

This parameter can be used to specify the requested output resolution.

IMAGE_QUALITY

This parameter is only used for JPEG images. By default, the JPEG compression is -1.

You can change the default per QGIS project in the OWS Server ► WMS capabilities menu of the Project ► Properties… dialog. If you want to override it in a GetMap request you can do it using the IMAGE_QUALITY parameter.

OPACITIES

Comma separated list of opacity values. Opacity can be set on layer or group level. Allowed values range from 0 (fully transparent) to 255 (fully opaque).

FILTER

A subset of layers can be selected with the FILTER parameter. The syntax is basically the same as for the QGIS subset string. However, there are some restrictions to avoid SQL injections into databases via QGIS Server. If a dangerous string is found in the parameter, QGIS Server will return the next error:

<ServiceExceptionReport>
  <ServiceException code="Security">The filter string XXXXXXXXX has been rejected because of security reasons.
  Note: Text strings have to be enclosed in single or double quotes. A space between each word / special character is mandatory.
  Allowed Keywords and special characters are IS,NOT,NULL,AND,OR,IN,=,<,=<,>,>=,!=,',',(,),DMETAPHONE,SOUNDEX.
  Not allowed are semicolons in the filter expression.</ServiceException>
</ServiceExceptionReport>

URL example:

http://localhost/qgisserver?
SERVICE=WMS
&REQUEST=GetMap
&LAYERS=mylayer1,mylayer2,mylayer3
&FILTER=mylayer1:"col1";mylayer1,mylayer2:"col2" = 'blabla'
&...

In this example, the same filter (field col2 equals the string blabla) is applied to layers mylayer1 and mylayer2, while the filter on col1 is only applied to mylayer1.

Not

It is possible to make attribute searches via GetFeatureInfo and omit the X/Y parameter if a FILTER is there. QGIS Server then returns info about the matching features and generates a combined bounding box in the XML output.

SELECTION

The SELECTION parameter can highlight features from one or more layers. Vector features can be selected by passing comma separated lists with feature ids.

http://localhost/qgisserver?
SERVICE=WMS
&REQUEST=GetMap
&LAYERS=mylayer1,mylayer2
&SELECTION=mylayer1:3,6,9;mylayer2:1,5,6
&...

The following image presents the response from a GetMap request using the SELECTION option e.g. http://myserver.com/...&SELECTION=countries:171,65.

As those features id’s correspond in the source dataset to France and Romania they’re highlighted in yellow.

../../_images/server_selection_parameter.png

Şekil 3.1 Server response to a GetMap request with SELECTION parameter

FORMAT-OPTIONS

This parameter can be used to specify options for the selected format. Only for FORMAT=application/dxf. A list of key:value pairs separated by semicolon:

  • SCALE: to be used for symbology rules, filters and styles (not actual scaling of the data - data remains in the original scale).

  • MODE: corresponds to the export options offered in the QGIS Desktop DXF export dialog. Possible values are NOSYMBOLOGY, FEATURESYMBOLOGY and SYMBOLLAYERSYMBOLOGY.

  • LAYERSATTRIBUTES: specify a field that contains values for DXF layer names - if not specified, the original QGIS layer names are used.

  • USE_TITLE_AS_LAYERNAME: if enabled, the title of the layer will be used as layer name.

  • CODEC: specify a codec to be used for encoding. Default is ISO-8859-1 check the QGIS desktop DXF export dialog for valid values.

  • NO_MTEXT: Use TEXT instead of MTEXT for labels.

  • FORCE_2D: Force 2D output. This is required for polyline width.

TILED

For performance reasons, QGIS Server can be used in tiled mode. In this mode, the client requests several small fixed size tiles, and assembles them to form the whole map. Doing this, symbols at or near the boundary between two tiles may appeared cut, because they are only present in one of the tile.

Set the TILED parameter to TRUE to tell QGIS Server to work in tiled mode, and to apply the Tile buffer configured in the QGIS project (see Configure your project).

When TILED is TRUE and when a non-zero Tile buffer is configured in the QGIS project, features outside the tile extent are drawn to avoid cut symbols at tile boundaries.

TILED defaults to FALSE.

3.1.2. GetFeatureInfo

Standard parameters for the GetFeatureInfo request according to the OGC WMS 1.1.1 and 1.3.0 specifications:

Parameter

Gerekli

Tanım

SERVICE

Yes

Name of the service (WMS)

VERSION

No

Version of the service

REQUEST

Yes

Name of the request (GetFeatureInfo)

QUERY_LAYERS

Yes

Layers to query

LAYERS

Yes

Layers to display (identical to QUERY_LAYERS)

STYLES

No

Layers’ style

SRS / CRS

Yes

Coordinate reference system

BBOX

No

Map extent

WIDTH

Yes

Width of the image in pixels

HEIGHT

Yes

Height of the image in pixels

TRANSPARENT

No

Transparent background

INFO_FORMAT

No

Output format

FEATURE_COUNT

No

Maximum number of features to return

I

No

Pixel column of the point to query

X

No

Same as I parameter, but in WMS 1.1.1

J

No

Pixel row of the point to query

Y

No

Same as J parameter, but in WMS 1.1.1

WMS_PRECISION

No

The precision (number of digits) to be used when returning geometry (see how to add geometry to feature response). The default value is -1 meaning that the precision defined in the project is used.

In addition to the standard ones, QGIS Server supports the following extra parameters:

Parameter

Gerekli

Tanım

MAP

Yes

Specify the QGIS project file

FILTER

No

Subset of features

FI_POINT_TOLERANCE

No

Tolerance in pixels for point layers

FI_LINE_TOLERANCE

No

Tolerance in pixels for line layers

FI_POLYGON_TOLERANCE

No

Tolerance in pixels for polygon layers

FILTER_GEOM

No

Geometry filtering

WITH_MAPTIP

No

Add map tips to the output

WITH_GEOMETRY

No

Add geometry to the output

URL example:

http://localhost/qgisserver?
SERVICE=WMS
&VERSION=1.3.0
&REQUEST=GetMap
&MAP=/home/qgis/projects/world.qgs
&LAYERS=mylayer1,mylayer2,mylayer3
&CRS=EPSG:4326
&WIDTH=400
&HEIGHT=400
&INFO_FORMAT=text/xml
&TRANSPARENT=TRUE
&QUERY_LAYERS=mylayer1
&FEATURE_COUNT=3
&I=250
&J=250

REQUEST

This parameter is GetFeatureInfo in case of the GetFeatureInfo request.

INFO_FORMAT

This parameter may be used to specify the format of the result. Available values are:

  • text/xml

  • text/html

  • text/plain

  • application/vnd.ogc.gml

  • application/json

QUERY_LAYERS

This parameter specifies the layers to display on the map. Names are separated by a comma.

In addition, QGIS Server introduces options to select layers by:

  • short name

  • layer id

See the LAYERS parameter defined in GetMap for more information.

FEATURE_COUNT

This parameter specifies the maximum number of features per layer to return. For example if QUERY_LAYERS is set to layer1,layer2 and FEATURE_COUNT is set to 3 then a maximum of 3 features from layer1 will be returned. Likewise a maximun of 3 features from layer2 will be returned.

By default, only 1 feature per layer is returned.

I

This parameter, defined in WMS 1.3.0, allows you to specify the pixel column of the query point.

X

Same parameter as I, but defined in WMS 1.1.1.

J

This parameter, defined in WMS 1.3.0, allows you to specify the pixel row of the query point.

Y

Same parameter as J, but defined in WMS 1.1.1.

FI_POINT_TOLERANCE

This parameter specifies the tolerance in pixels for point layers.

FI_LINE_TOLERANCE

This parameter specifies the tolerance in pixels for line layers.

FI_POLYGON_TOLERANCE

This parameter specifies the tolerance in pixels for polygon layers.

FILTER_GEOM

This parameter specifies a WKT geometry with which features have to intersect.

WITH_MAPTIP

This parameter specifies whether to add map tips to the output.

Available values are (not case sensitive):

  • TRUE

  • FALSE

WITH_GEOMETRY

This parameter specifies whether to add geometries to the output. To use this feature you must first enable the Add geometry to feature response option in the QGIS project. See Configure your project.

Available values are (not case sensitive):

  • TRUE

  • FALSE

3.1.3. GetPrint

QGIS Server has the capability to create print layout output in pdf or pixel format. Print layout windows in the published project are used as templates. In the GetPrint request, the client has the possibility to specify parameters of the contained layout maps and labels.

Parameters for the GetPrint request:

Parameter

Gerekli

Tanım

MAP

Yes

Specify the QGIS project file

SERVICE

Yes

Name of the service (WMS)

VERSION

No

Version of the service

REQUEST

Yes

Name of the request (GetPrint)

LAYERS

No

Layers to display

TEMPLATE

Yes

Layout template to use

SRS / CRS

Yes

Coordinate reference system

FORMAT

No

Output format

ATLAS_PK

No

Atlas features

STYLES

No

Layers’ style

TRANSPARENT

No

Transparent background

OPACITIES

No

Opacity for layer or group

SELECTION

No

Highlight features

mapX:EXTENT

No

Extent of the map ‘X’

mapX:LAYERS

No

Layers of the map ‘X’

mapX:STYLES

No

Layers’ style of the map ‘X’

mapX:SCALE

No

Layers’ scale of the map ‘X’

mapX:ROTATION

No

Rotation of the map ‘X’

mapX:GRID_INTERVAL_X

No

Grid interval on x axis of the map ‘X’

mapX:GRID_INTERVAL_Y

No

Grid interval on y axis of the map ‘X’

URL example:

http://localhost/qgisserver?
SERVICE=WMS
&VERSION=1.3.0
&REQUEST=GetPrint
&MAP=/home/qgis/projects/world.qgs
&CRS=EPSG:4326
&FORMAT=png
&TEMPLATE=Layout%201
&map0:EXTENT=-180,-90,180,90
&map0:LAYERS=mylayer1,mylayer2,mylayer3
&map0:OPACITIES=125,200,125
&map0:ROTATION=45

Note that the layout template may contain more than one map. In this way, if you want to configure a specific map, you have to use mapX: parameters where X is a positive number that you can retrieve thanks to the GetProjectSettings request.

For example:

<WMS_Capabilities>
...
<ComposerTemplates xsi:type="wms:_ExtendedCapabilities">
<ComposerTemplate width="297" height="210" name="Druckzusammenstellung 1">
<ComposerMap width="171" height="133" name="map0"/>
<ComposerMap width="49" height="46" name="map1"/></ComposerTemplate>
</ComposerTemplates>
...
</WMS_Capabilities>

REQUEST

This parameter has to be GetPrint for the GetPrint request.

TEMPLATE

This parameter can be used to specify the name of a layout template to use for printing.

FORMAT

This parameter specifies the format of map image. Available values are:

  • png (default value)

  • image/png

  • jpg

  • jpeg

  • image/jpeg

  • svg

  • image/svg

  • image/svg+xml

  • pdf

  • application/pdf

If the FORMAT parameter is different from one of these values, then an exception is returned.

ATLAS_PK

This parameter allows activation of Atlas rendering by indicating which features we want to print. In order to retrieve an atlas with all features, the * symbol may be used (according to the maximum number of features allowed in the project configuration).

When FORMAT is pdf, a single PDF document combining the feature pages is returned. For all other formats, a single page is returned.

mapX:EXTENT

This parameter specifies the extent for a layout map item as xmin,ymin,xmax,ymax.

mapX:ROTATION

This parameter specifies the map rotation in degrees.

mapX:GRID_INTERVAL_X

This parameter specifies the grid line density in the X direction.

mapX:GRID_INTERVAL_Y

This parameter specifies the grid line density in the Y direction.

mapX:SCALE

This parameter specifies the map scale for a layout map item. This is useful to ensure scale based visibility of layers and labels even if client and server may have different algorithms to calculate the scale denominator.

mapX:LAYERS

This parameter specifies the layers for a layout map item. See GetMap Layers for more information on this parameter.

mapX:STYLES

This parameter specifies the layers’ styles defined in a specific layout map item. See GetMap Styles for more information on this parameter.

3.1.4. GetLegendGraphics

Several additional parameters are available to change the size of the legend elements:

  • BOXSPACE space between legend frame and content (mm)

  • FORMAT, image/jpeg, image/png or application/json. For JSON, symbols are encoded with Base64 and most other options related to layout or fonts are not taken into account because the legend must be built on the client side.

  • LAYERSPACE vertical space between layers (mm)

  • LAYERTITLESPACE vertical space between layer title and items following (mm)

  • SYMBOLSPACE vertical space between symbol and item following (mm)

  • ICONLABELSPACE horizontal space between symbol and label text (mm)

  • SYMBOLWIDTH width of the symbol preview (mm)

  • SYMBOLHEIGHT height of the symbol preview (mm)

These parameters change the font properties for layer titles and item labels:

  • LAYERFONTFAMILY / ITEMFONTFAMILY font family for layer title / item text

  • LAYERFONTBOLD / ITEMFONTBOLD TRUE to use a bold font

  • LAYERFONTSIZE / ITEMFONTSIZE Font size in point

  • LAYERFONTITALIC / ITEMFONTITALIC TRUE to use italic font

  • LAYERFONTCOLOR / ITEMFONTCOLOR Hex color code (e.g. #FF0000 for red)

  • LAYERTITLE FALSE to get only the legend graphics without layer title

  • RULELABEL:

    • FALSE legend graphics without item labels

    • AUTO hide item label for layers with Single symbol rendering

Content based legend. These parameters let the client request a legend showing only the symbols for the features falling into the requested area:

  • BBOX the geographical area for which the legend should be built

  • CRS / SRS the coordinate reference system adopted to define the BBOX coordinates

  • SRCWIDTH / SRCHEIGHT if set these should match the WIDTH and HEIGHT parameters of the GetMap request, to let QGIS Server scale symbols according to the map view image size.

Content based legend features are based on the UMN MapServer implementation:

  • SHOWFEATURECOUNT if set to TRUE adds in the legend the feature count of the features like in the following image:

    ../../_images/getfeaturecount_legend.png

  • RULE set it to a given rule name to get only the named rule symbol

  • WIDTH/HEIGHT the generated legend image size if the RULE parameter is set

3.1.5. GetProjectSettings

This request type works similar to GetCapabilities, but it is more specific to QGIS Server and allows a client to read additional information which is not available in the GetCapabilities output:

  • initial visibility of layers

  • information about vector attributes and their edit types

  • information about layer order and drawing order

  • list of layers published in WFS

  • show if a group in the layer tree is mutually exclusive

3.2. Web Feature Service (WFS)

The 1.0.0 and 1.1.0 WFS standards implemented in QGIS Server provide a HTTP interface to query geographic features from a QGIS project. A typical WFS request defines the QGIS project to use and the layer to query.

Specifications document according to the version number of the service:

Standard requests provided by QGIS Server:

Request

Tanım

GetCapabilities

Returns XML metadata with information about the server

GetFeature

Returns a selection of features

DescribeFeatureType

Returns a description of feature types and properties

Transaction

Allows features to be inserted, updated or deleted

3.2.1. GetFeature

Standard parameters for the GetFeature request according to the OGC WFS 1.0.0 and 1.1.0 specifications:

Parameter

Gerekli

Tanım

SERVICE

Yes

Name of the service

VERSION

No

Version of the service

REQUEST

Yes

Name of the request

TYPENAME

No

Name of layers

OUTPUTFORMAT

No

Output Format

RESULTTYPE

No

Type of the result

PROPERTYNAME

No

Name of properties to return

MAXFEATURES

No

Maximum number of features to return

SRSNAME

No

Coordinate reference system

FEATUREID

No

Filter the features by ids

FILTER

No

OGC Filter Encoding

BBOX

No

Map Extent

SORTBY

No

Sort the results

In addition to the standard ones, QGIS Server supports the following extra parameters:

Parameter

Gerekli

Tanım

MAP

Yes

Specify the QGIS project file

STARTINDEX

No

Paging

GEOMETRYNAME

No

Type of geometry to return

EXP_FILTER

No

Expression filtering

SERVICE

This parameter has to be WFS in case of the GetFeature request.

For example:

http://localhost/qgisserver?
SERVICE=WFS
&...

VERSION

This parameter allows to specify the version of the service to use. Available values for the VERSION parameter are:

  • 1.0.0

  • 1.1.0

If no version is indicated in the request, then 1.1.0 is used by default.

URL example:

http://localhost/qgisserver?
SERVICE=WFS
&VERSION=1.1.0
&...

REQUEST

This parameter is GetFeature in case of the GetFeature request.

URL example:

http://localhost/qgisserver?
SERVICE=WFS
&VERSION=1.1.0
&REQUEST=GetFeature
&...

RESULTTYPE

This parameter may be used to specify the kind of result to return. Available values are:

  • results: the default behavior

  • hits: returns only a feature count

URL example:

http://localhost/qgisserver?
SERVICE=WFS
&VERSION=1.1.0
&REQUEST=GetFeature
&RESULTTYPE=hits
&...

GEOMETRYNAME

This parameter can be used to specify the kind of geometry to return for features. Available values are:

  • extent

  • centroid

  • none

URL example:

http://localhost/qgisserver?
SERVICE=WFS
&VERSION=1.1.0
&REQUEST=GetFeature
&GEOMETRYNAME=centroid
&...

STARTINDEX

This parameter is standard in WFS 2.0, but it’s an extension for WFS 1.0.0. Actually, it can be used to skip some features in the result set and in combination with MAXFEATURES, it provides the ability to page through results.

URL example:

http://localhost/qgisserver?
SERVICE=WFS
&VERSION=1.1.0
&REQUEST=GetFeature
&STARTINDEX=2
&...

3.3. Web Map Tile Service (WMTS)

The 1.0.0 WMTS standard implemented in QGIS Server provides a HTTP interface to request tiled map images generated from a QGIS project. A typical WMTS request defined the QGIS project to use, some WMS parameters like layers to render, as well as tile parameters.

Specifications document of the service:

Standard requests provided by QGIS Server:

Request

Tanım

GetCapabilities

Returns XML metadata with information about the server

GetTile

Returns a tile

GetFeatureInfo

Retrieves data (geometry and values) for a pixel location

3.3.1. GetCapabilities

Standard parameters for the GetCapabilities request according to the OGC WMTS 1.0.0 specifications:

Parameter

Gerekli

Tanım

SERVICE

Yes

Name of the service (WMTS)

REQUEST

Yes

Name of the request (GetCapabilities)

In addition to the standard ones, QGIS Server supports the following extra parameters:

Parameter

Gerekli

Tanım

MAP

Yes

Specify the QGIS project file

URL example:

http://localhost/qgisserver?
SERVICE=WMTS
&REQUEST=GetCapabilities
&MAP=/home/qgis/projects/world.qgs

SERVICE

This parameter has to be WMTS in case of the GetCapabilities request.

REQUEST

This parameter is GetCapabilities in case of the GetCapabilities request.

MAP

This parameter allows to define the QGIS project file to use.

3.3.2. GetTile

Standard parameters for the GetTile request according to the OGC WMTS 1.0.0 specifications:

Parameter

Gerekli

Tanım

SERVICE

Yes

Name of the service (WMTS)

REQUEST

Yes

Name of the request (GetTile)

LAYER

Yes

Layer identifier

FORMAT

Yes

Output format of the tile

TILEMATRIXSET

Yes

Name of the pyramid

TILEMATRIX

Yes

Meshing

TILEROW

Yes

Row coordinate in the mesh

TILECOL

Yes

Column coordinate in the mesh

In addition to the standard ones, QGIS Server supports the following extra parameters:

Parameter

Gerekli

Tanım

MAP

Yes

Specify the QGIS project file

URL example:

http://localhost/qgisserver?
SERVICE=WMTS
&REQUEST=GetTile
&MAP=/home/qgis/projects/world.qgs
&LAYER=mylayer
&FORMAT=image/png
&TILEMATRIXSET=EPSG:4326
&TILEROW=0
&TILECOL=0

SERVICE

This parameter has to be WMTS in case of the GetTile request.

REQUEST

This parameter is GetTile in case of the GetTile request.

LAYER

This parameter allows to specify the layer to display on the tile.

In addition, QGIS Server introduced some options to select a layer by:

  • a short name

  • the layer id

The short name of a layer may be configured through Properties ► Metadata in layer menu. If the short name is defined, then it’s used by default instead of the layer’s name:

http://localhost/qgisserver?
SERVICE=WMTS
&REQUEST=GetTile
&LAYER=mynickname
&...

Moreover, there’s a project option allowing to select layers by their id in OWS Server ► WMS capabilities menu of the Project ► Project Properties dialog. To activate this option, the checkbox Use layer ids as names has to be selected.

http://localhost/qgisserver?
SERVICE=WMTS
&REQUEST=GetTile
&LAYER=mylayerid1
&...

FORMAT

This parameter may be used to specify the format of tile image. Available values are:

  • jpg

  • jpeg

  • image/jpeg

  • image/png

If the FORMAT parameter is different from one of these values, then the default format PNG is used instead.

TILEMATRIXSET

This parameter defines the CRS to use when computing the underlying pyramid. Format: EPSG:XXXX.

TILEMATRIX

This parameter allows to define the matrix to use for the output tile.

TILEROW

This parameter allows to select the row of the tile to get within the matrix.

TILECOL

This parameter allows to select the column of the tile to get within the matrix.

MAP

This parameter allows to define the QGIS project file to use.

As mentioned in GetMap parameters table, MAP is mandatory because a request needs a QGIS project to actually work. However, the QGIS_PROJECT_FILE environment variable may be used to define a default QGIS project. In this specific case, MAP is not longer a required parameter. For further information you may refer to Advanced configuration.

3.3.3. GetFeatureInfo

Standard parameters for the GetFeatureInfo request according to the OGC WMTS 1.0.0 specification:

Parameter

Gerekli

Tanım

SERVICE

Yes

Name of the service (WMTS)

REQUEST

Yes

Name of the request (GetFeatureInfo)

LAYER

Yes

Layer identifier

INFOFORMAT

No

Output format

I

No

X coordinate of a pixel

J

No

Y coordinate of a pixel

TILEMATRIXSET

Yes

See GetTile

TILEMATRIX

Yes

See GetTile

TILEROW

Yes

See GetTile

TILECOL

Yes

See GetTile

In addition to the standard ones, QGIS Server supports the following extra parameters:

Parameter

Gerekli

Tanım

MAP

Yes

Specify the QGIS project file

URL example:

http://localhost/qgisserver?
SERVICE=WMTS
&REQUEST=GetFeatureInfo
&MAP=/home/qgis/projects/world.qgs
&LAYER=mylayer
&INFOFORMAT=image/html
&I=10
&J=5

SERVICE

This parameter has to be WMTS in case of the GetFeatureInfo request.

REQUEST

This parameter is GetFeatureInfo in case of the GetFeatureInfo request.

MAP

This parameter allows to define the QGIS project file to use.

As mentioned in GetMap parameters table, MAP is mandatory because a request needs a QGIS project to actually work. However, the QGIS_PROJECT_FILE environment variable may be used to define a default QGIS project. In this specific case, MAP is not longer a required parameter. For further information you may refer to Advanced configuration.

LAYER

This parameter allows to specify the layer to display on the tile.

In addition, QGIS Server introduced some options to select a layer by:

  • a short name

  • the layer id

The short name of a layer may be configured through Properties ► Metadata in layer menu. If the short name is defined, then it’s used by default instead of the layer’s name:

http://localhost/qgisserver?
SERVICE=WMTS
&REQUEST=GetFeatureInfo
&LAYER=mynickname
&...

Moreover, there’s a project option allowing to select layers by their id in OWS Server ► WMS capabilities menu of the Project ► Project Properties dialog. To activate this option, the checkbox Use layer ids as names has to be selected.

http://localhost/qgisserver?
SERVICE=WMTS
&REQUEST=GetFeatureInfo
&LAYER=mylayerid1
&...

INFOFORMAT

This parameter allows to define the output format of the result. Available values are:

  • text/xml

  • text/html

  • text/plain

  • application/vnd.ogc.gml

The default value is text/plain.

I

This parameter allows to define the X coordinate of the pixel for which we want to retrieve underlying information.

J

This parameter allows to define the Y coordinate of the pixel for which we want to retrieve underlying information.

3.4. WFS3 (OGC API Features)

WFS3 is the first implementation of the new generation of OGC protocols. It is described by the OGC API - Features - Part 1: Core document.

Here is a quick informal summary of the most important differences between the well known WFS protocol and WFS3:

  • WFS3 is based on a REST API

  • WFS3 API must follow the OPENAPI specifications

  • WFS3 supports multiple output formats but it does not dictate any (only GeoJSON and HTML are currently available in QGIS WFS3) and it uses content negotiation to determine which format is to be served to the client

  • JSON and HTML are first class citizens in WFS3

  • WFS3 is self-documenting (through the /api endpoint)

  • WFS3 is fully navigable (through links) and browsable

Önemli

While the WFS3 implementation in QGIS can make use of the MAP parameter to specify the project file, no extra query parameters are allowed by the OPENAPI specification. For this reason it is strongly recommended that MAP is not exposed in the URL and the project file is specified in the environment by other means (i.e. setting QGIS_PROJECT_FILE in the environment through a web server rewrite rule).

Not

The API endpoint provides comprehensive documentation of all supported parameters and output formats of your service. The following paragraphs will only describe the most important ones.

3.4.1. Resource representation

The QGIS Server WFS3 implementation currently supports the following resource representation (output) formats:

  • HTML

  • JSON

The format that is actually served will depend on content negotiation, but a specific format can be explicitly requested by appending a format specifier to the endpoints.

Supported format specifier extensions are:

  • .json

  • .html

Additional format specifier aliases may be defined by specific endpoints:

  • .openapi: alias for .json supported by the API endpoint

  • .geojson: alias for .json supported by the Features and Feature endpoints

3.4.2. Endpoints

The API provides a list of endpoints that the clients can retrieve. The system is designed in such a way that every response provides a set of links to navigate through all the provided resources.

Endpoints points provided by the QGIS implementation are:

Name

Path

Tanım

Landing Page

/

General information about the service and provides links to all available endpoints

Conformance

/conformance

Information about the conformance of the service to the standards

API

/api

Full description of the endpoints provided by the service and the returned documents structure

Collections

/collections

List of all collections (i.e. ‘vector layers’) provided by the service

Collection

/collections/{collectionId}

Information about a collection (name, metadata, extent etc.)

Özellikler

/collections/{collectionId}/items

List of the features provided by the collection

Feature

/collections/{collectionId}/items/{featureId}

Information about a single feature

Landing Page

The main endpoint is the Landing Page. From that page it is possible to navigate to all the available service endpoints. The Landing Page must provide links to

  • the API definition (path /api link relations service-desc and service-doc),

  • the Conformance declaration (path /conformance, link relation conformance), and

  • the Collections (path /collections, link relation data).

../../_images/server_wfs3_landing_page.png

Şekil 3.2 Server WFS3 landing page

API Definition

The API Definition is an OPENAPI-compliant description of the API provided by the service. In its HTML representation it is a browsable page where all the endpoints and their response formats are accurately listed and documented. The path of this endpoint is /api.

The API definition provides a comprehensive and authoritative documentation of the service, including all supported parameters and returned formats.

Not

This endpoint is analogue to WFS’s GetCapabilities

Collections list

The collections endpoint provides a list of all the collections available in the service. Since the service “serves” a single QGIS project the collections are the vector layers from the current project (if they were published as WFS in the project properties). The path of this endpoint is /collections/.

../../_images/server_wfs3_collections.png

Şekil 3.3 Server WFS3 collections list page

Collection detail

While the collections endpoint does not provide detailed information about each available collection, that information is available in the /collections/{collectionId} endpoints. Typical information includes the extent, a description, CRSs and other metadata.

The HTML representation also provides a browsable map with the available features.

../../_images/server_wfs3_collection.png

Şekil 3.4 Server WFS3 collection detail page

Features list

This endpoint provides a list of all features in a collection knowing the collection ID. The path of this endpoint is /collections/{collectionId}/items.

The HTML representation also provides a browsable map with the available features.

Not

This endpoint is analogue to GetFeature in WFS 1 and WFS 2.

../../_images/server_wfs3_features.png

Şekil 3.5 Server WFS3 features list page

Feature detail

This endpoint provides all the available information about a single feature, including the feature attributes and its geometry. The path of this endpoint is /collections/{collectionId}/items/{itemId}.

The HTML representation also provides a browsable map with the feature geometry.

../../_images/server_wfs3_feature.png

Şekil 3.6 Server WFS3 feature detail page

3.4.3. Pagination

Pagination of a long list of features is implemented in the OGC API through next and prev links, QGIS server constructs these links by appending limit and offset as query string parameters.

URL example:

http://localhost/qgisserver/wfs3/collection_one/items.json?offset=10&limit=10

Not

The maximum acceptable value for limit can be configured with the QGIS_SERVER_API_WFS3_MAX_LIMIT server configuration setting (see: Environment variables).

3.4.4. Feature filtering

The features available in a collection can be filtered/searched by specifying one or more filters.

Date and time filter

Collections with date and/or datetime attributes can be filtered by specifying a datetime argument in the query string. By default the first date/datetime field is used for filtering. This behavior can be configured by setting a “Date” or “Time” dimension in the QGIS Server ► Dimension section of the layer properties dialog.

The date and time filtering syntax is fully described in the API Definition and also supports ranges (begin and end values are included) in addition to single values.

URL examples:

Returns only the features with date dimension matching 2019-01-01

http://localhost/qgisserver/wfs3/collection_one/items.json?datetime=2019-01-01

Returns only the features with datetime dimension matching 2019-01-01T01:01:01

http://localhost/qgisserver/wfs3/collection_one/items.json?datetime=2019-01-01T01:01:01

Returns only the features with datetime dimension in the range 2019-01-01T01:01:01 - 2019-01-01T12:00:00

http://localhost/qgisserver/wfs3/collection_one/items.json?datetime=2019-01-01T01:01:01/2019-01-01T12:00:00

Bounding box filter

A bounding box spatial filter can be specified with the bbox parameter:

The order of the comma separated elements is:

  • Lower left corner, WGS 84 longitude

  • Lower left corner, WGS 84 latitude

  • Upper right corner, WGS 84 longitude

  • Upper right corner, WGS 84 latitude

Not

The OGC specifications also allow a 6 item bbox specifier where the third and sixth items are the Z components, this is not yet supported by QGIS server.

URL example:

http://localhost/qgisserver/wfs3/collection_one/items.json?bbox=-180,-90,180,90

If the CRS of the bounding box is not WGS 84, a different CRS can be specified by using the optional parameter bbox-crs. The CRS format identifier must be in the OGC URI format:

URL example:

http://localhost/qgisserver/wfs3/collection_one/items.json?bbox=913191,5606014,913234,5606029&bbox-crs=http://www.opengis.net/def/crs/EPSG/9.6.2/3857

Attribute filters

Attribute filters can be combined with the bounding box filter and they are in the general form: <attribute name>=<attribute value>. Multiple filters can be combined using the AND operator.

URL example:

filters all features where attribute name equals “my value”

http://localhost/qgisserver/wfs3/collection_one/items.json?attribute_one=my%20value

Partial matches are also supported by using a * (“star”) operator:

URL example:

filters all features where attribute name ends with “value”

http://localhost/qgisserver/wfs3/collection_one/items.json?attribute_one=*value

3.4.5. Feature sorting

It is possible to order the result set by field value using the sortby query parameter.

The results are sorted in ascending order by default. To sort the results in descending order, a boolean flag (sortdesc) can be set:

http://localhost/qgisserver/wfs3/collection_one/items.json?sortby=name&sortdesc=1

3.4.6. Attribute selection

The feature attributes returned by a Features list call can be limited by adding a comma separated list of attribute names in the optional properties query string argument.

URL example:

returns only the name attribute

http://localhost/qgisserver/wfs3/collection_one/items.json?properties=name

3.4.7. Customize the HTML pages

The HTML representation uses a set of HTML templates to generate the response. The template is parsed by a template engine called inja. The templates can be customized by overriding them (see: Template overrides). The template has access to the same data that are available to the JSON representation and a few additional functions are available to the template:

Custom template functions

  • path_append( path ): appends a directory path to the current url

  • path_chomp( n ): removes the specified number “n” of directory components from the current url path

  • json_dump( ): prints the JSON data passed to the template

  • static( path ): returns the full URL to the specified static path. For example: “static( “/style/black.css” )” with a root path “http://localhost/qgisserver/wfs3” will return “http://localhost/qgisserver/wfs3/static/style/black.css”.

  • links_filter( links, key, value ): Returns filtered links from a link list

  • content_type_name( content_type ): Returns a short name from a content type, for example “text/html” will return “HTML”

Template overrides

Templates and static assets are stored in subdirectories of the QGIS server default API resource directory (/usr/share/qgis/resources/server/api/ on a Linux system), the base directory can be customized by changing the environment variable QGIS_SERVER_API_RESOURCES_DIRECTORY.

A typical Linux installation will have the following directory tree:

/usr/share/qgis/resources/server/api/
└── ogc
    ├── schema.json
    ├── static
    │   ├── jsonFormatter.min.css
    │   ├── jsonFormatter.min.js
    │   └── style.css
    └── templates
        └── wfs3
            ├── describeCollection.html
            ├── describeCollections.html
            ├── footer.html
            ├── getApiDescription.html
            ├── getFeature.html
            ├── getFeatures.html
            ├── getLandingPage.html
            ├── getRequirementClasses.html
            ├── header.html
            ├── leaflet_map.html
            └── links.html

To override the templates you can copy the whole tree to another location and point QGIS_SERVER_API_RESOURCES_DIRECTORY to the new location.

3.5. Extra parameters supported by all request types

The following extra parameters are supported by all protocols.

  • FILE_NAME: if set, the server response will be sent to the client as a file attachment with the specified file name.

Not

Not available for WFS3.

  • MAP: Similar to MapServer, the MAP parameter can be used to specify the path to the QGIS project file. You can specify an absolute path or a path relative to the location of the server executable (qgis_mapserv.fcgi). If not specified, QGIS Server searches for .qgs files in the directory where the server executable is located.

    Example:

    http://localhost/cgi-bin/qgis_mapserv.fcgi?\
  REQUEST=GetMap&MAP=/home/qgis/projects/world.qgs&...

Not

You can define a QGIS_PROJECT_FILE as an environment variable to tell the server executable where to find the QGIS project file. This variable will be the location where QGIS will look for the project file. If not defined it will use the MAP parameter in the request and finally look at the server executable directory.

3.6. REDLINING

This feature is available and can be used with GetMap and GetPrint requests.

The redlining feature can be used to pass geometries and labels in the request which are overlapped by the server over the standard returned image (map). This permits the user to put emphasis or maybe add some comments (labels) to some areas, locations etc. that are not in the standard map.

The GetMap request is in the format:

http://qgisplatform.demo/cgi-bin/qgis_mapserv.fcgi?map=/world.qgs&SERVICE=WMS&VERSION=1.3.0&
REQUEST=GetMap
...
&HIGHLIGHT_GEOM=POLYGON((590000 5647000, 590000 6110620, 2500000 6110620, 2500000 5647000, 590000 5647000))
&HIGHLIGHT_SYMBOL=<StyledLayerDescriptor><UserStyle><Name>Highlight</Name><FeatureTypeStyle><Rule><Name>Symbol</Name><LineSymbolizer><Stroke><SvgParameter name="stroke">%23ea1173</SvgParameter><SvgParameter name="stroke-opacity">1</SvgParameter><SvgParameter name="stroke-width">1.6</SvgParameter></Stroke></LineSymbolizer></Rule></FeatureTypeStyle></UserStyle></StyledLayerDescriptor>
&HIGHLIGHT_LABELSTRING=Write label here
&HIGHLIGHT_LABELSIZE=16
&HIGHLIGHT_LABELCOLOR=%23000000
&HIGHLIGHT_LABELBUFFERCOLOR=%23FFFFFF
&HIGHLIGHT_LABELBUFFERSIZE=1.5

The GetPrint equivalent is in the format (note that mapX: parameter is added to tell which map has redlining):

http://qgisplatform.demo/cgi-bin/qgis_mapserv.fcgi?map=/world.qgs&SERVICE=WMS&VERSION=1.3.0&
REQUEST=GetPrint
...
&map0:HIGHLIGHT_GEOM=POLYGON((590000 5647000, 590000 6110620, 2500000 6110620, 2500000 5647000, 590000 5647000))
&map0:HIGHLIGHT_SYMBOL=<StyledLayerDescriptor><UserStyle><Name>Highlight</Name><FeatureTypeStyle><Rule><Name>Symbol</Name><LineSymbolizer><Stroke><SvgParameter name="stroke">%23ea1173</SvgParameter><SvgParameter name="stroke-opacity">1</SvgParameter><SvgParameter name="stroke-width">1.6</SvgParameter></Stroke></LineSymbolizer></Rule></FeatureTypeStyle></UserStyle></StyledLayerDescriptor>
&map0:HIGHLIGHT_LABELSTRING=Write label here
&map0:HIGHLIGHT_LABELSIZE=16
&map0:HIGHLIGHT_LABELCOLOR=%23000000
&map0:HIGHLIGHT_LABELBUFFERCOLOR=%23FFFFFF
&map0:HIGHLIGHT_LABELBUFFERSIZE=1.5

Here is the image outputed by the above request in which a polygon and a label are drawn on top of the normal map:

../../_images/server_redlining.png

Şekil 3.7 Server response to a GetMap request with redlining parameters

You can see there are several parameters in this request:

  • HIGHLIGHT_GEOM: You can add POINT, MULTILINESTRING, POLYGON etc. It supports multipart geometries. Here is an example: HIGHLIGHT_GEOM=MULTILINESTRING((0 0, 0 1, 1 1)). The coordinates should be in the CRS of the GetMap/GetPrint request.

  • HIGHLIGHT_SYMBOL: This controls how the geometry is outlined and you can change the stroke width, color and opacity.

  • HIGHLIGHT_LABELSTRING: You can pass your labeling text to this parameter.

  • HIGHLIGHT_LABELSIZE: This parameter controls the size of the label.

  • HIGHLIGHT_LABELFONT: This parameter controls the font of the label (e.g. Arial)

  • HIGHLIGHT_LABELCOLOR: This parameter controls the label color.

  • HIGHLIGHT_LABELBUFFERCOLOR: This parameter controls the label buffer color.

  • HIGHLIGHT_LABELBUFFERSIZE: This parameter controls the label buffer size.

3.7. External WMS layers

QGIS Server allows including layers from external WMS servers in WMS GetMap and WMS GetPrint requests. This is especially useful if a web client uses an external background layer in the web map. For performance reasons, such layers should be directly requested by the web client (not cascaded via QGIS server). For printing however, these layers should be cascaded via QGIS server in order to appear in the printed map.

External layers can be added to the LAYERS parameter as EXTERNAL_WMS:<layername>. The parameters for the external WMS layers (e.g. url, format, dpiMode, crs, layers, styles) can later be given as service parameters <layername>:<parameter>. In a GetMap request, this might look like this:

http://localhost/qgisserver?
SERVICE=WMS&REQUEST=GetMap
...
&LAYERS=EXTERNAL_WMS:basemap,layer1,layer2
&STYLES=,,
&basemap:url=http://externalserver.com/wms.fcgi
&basemap:format=image/jpeg
&basemap:dpiMode=7
&basemap:crs=EPSG:2056
&basemap:layers=orthofoto
&basemap:styles=default

Similarly, external layers can be used in GetPrint requests:

http://localhost/qgisserver?
SERVICE=WMS
...
&REQUEST=GetPrint&TEMPLATE=A4
&map0:layers=EXTERNAL_WMS:basemap,layer1,layer2
&map0:EXTENT=<minx,miny,maxx,maxy>
&basemap:url=http://externalserver.com/wms.fcgi
&basemap:format=image/jpeg
&basemap:dpiMode=7
&basemap:crs=EPSG:2056
&basemap:layers=orthofoto
&basemap:styles=default

3.8. QGIS Server catalog

The QGIS Server Catalog is a simple catalog that shows the list of QGIS projects served by the QGIS Server. It provides a user-friendly fully browsable website with basic mapping capabilities to quickly browse the datasets exposed through those QGIS projects.

The QGIS Server catalog uses the variables QGIS_SERVER_LANDING_PAGE_PROJECTS_DIRECTORIES and QGIS_SERVER_LANDING_PAGE_PROJECTS_PG_CONNECTIONS (see Environment variables)

../../_images/server_project_list.png

Şekil 3.8 Server Catalog project list page

You can consult the metadata associated to a project and the services that it provides. Links to those services are also given.

../../_images/server_project_metadata_services.png

Şekil 3.9 Server Catalog, metadata associated to a project and services (links to) that it provides.

By browsing a project, it is listed the dataset that it serves.

../../_images/server_browse_dataset.png

Şekil 3.10 Browsing a dataset served by a project in the Server Catalog

Use Right click on a layer to display the attribute table associated to it.

../../_images/server_attribute_table.png

Şekil 3.11 Attribute table associated to a layer

It is possible to consult information of the elements in the map as shown in the image below:

../../_images/server_info_results.png

Şekil 3.12 Consulting information of a map element