3. Vektör Verisi

gentleLogo

Nesneler:

Understanding of vector data models as used in GIS.

Anahtar kelimeler:

Vector, Point, Polyline, Polygon, Vertex, Geometry, Scale, Data Quality, Symbology, Data Sources

3.1. Gözden geçir

Vector data provide a way to represent real world features within the GIS environment. A feature is anything you can see on the landscape. Imagine you are standing on the top of a hill. Looking down you can see houses, roads, trees, rivers, and so on (see Şekil 3.13). Each one of these things would be a feature when we represent them in a GIS Application. Vector features have attributes, which consist of text or numerical information that describe the features.

../../_images/landscape.jpg

Şekil 3.13 Looking over a landscape you can see the main features, such as roads, houses and trees.

A vector feature has its shape represented using geometry. The geometry is made up of one or more interconnected vertices. A vertex describes a position in space using an X, Y and optionally Z axis. Geometries which have vertices with a Z axis are often referred to as 2.5D since they describe height or depth at each vertex, but not both.

When a feature’s geometry consists of only a single vertex, it is referred to as a point feature (see illustration Şekil 3.14). Where the geometry consists of two or more vertices and the first and last vertex are not equal, a polyline feature is formed (see illustration Şekil 3.15). Where three or more vertices are present, and the last vertex is equal to the first, an enclosed polygon feature is formed (see illustration Şekil 3.16).

../../_images/point_feature.png

Şekil 3.14 A point feature is described by its X, Y and optionally Z coordinate. The point attributes describe the point e.g. if it is a tree or a lamp post.

../../_images/polyline_feature.png

Şekil 3.15 A polyline is a sequence of joined vertices. Each vertex has an X, Y (and optionally Z) coordinate. Attributes describe the polyline.

../../_images/polygon_feature.png

Şekil 3.16 A polygon, like a polyline, is a sequence of vertices. However in a polygon, the first and last vertices are always at the same position.

Looking back at the picture of a landscape we showed you further up, you should be able to see the different types of features in the way that a GIS represents them now (see illustration Şekil 3.17).

../../_images/landscape_geometry.jpg

Şekil 3.17 Landscape features as we would present them in a GIS. Rivers (blue) and roads (green) can be represented as lines, trees as points (red) and houses as polygons (white).

3.2. Point features in detail

The first thing we need to realise when talking about point features is that what we describe as a point in GIS is a matter of opinion, and often dependent on scale. let’s look at cities for example. If you have a small scale map (which covers a large area), it may make sense to represent a city using a point feature. However as you zoom in to the map, moving towards a larger scale, it makes more sense to show the city limits as a polygon.

When you choose to use points to represent a feature is mostly a matter of scale (how far away are you from the feature), convenience (it takes less time and effort to create point features than polygon features), and the type of feature (some things like telephone poles just don’t make sense to be stored as polygons).

As we show in illustration Şekil 3.14, a point feature has an X, Y and optionally, Z value. The X and Y values will depend on the Coordinate Reference System (CRS) being used. We are going to go into more detail about Coordinate Reference Systems in a later tutorial. For now let’s simply say that a CRS is a way to accurately describe where a particular place is on the earth’s surface. One of the most common reference systems is Longitude and Latitude. Lines of Longitude run from the North Pole to the South Pole. Lines of Latitude run from the East to West. You can describe precisely where you are at any place on the earth by giving someone your Longitude (X) and Latitude (Y). If you make a similar measurement for a tree or a telephone pole and marked it on a map, you will have created a point feature.

Since we know the earth is not flat, it is often useful to add a Z value to a point feature. This describes how high above sea level you are.

3.3. Polyline features in detail

Where a point feature is a single vertex, a polyline has two or more vertices. The polyline is a continuous path drawn through each vertex, as shown in Şekil 3.15. When two vertices are joined, a line is created. When more than two are joined, they form a ‘line of lines’, or polyline.

A polyline is used to show the geometry of linear features such as roads, rivers, contours, footpaths, flight paths and so on. Sometimes we have special rules for polylines in addition to their basic geometry. For example contour lines may touch (e.g. at a cliff face) but should never cross over each other. Similarly, polylines used to store a road network should be connected at intersections. In some GIS applications you can set these special rules for a feature type (e.g. roads) and the GIS will ensure that these polylines always comply to these rules.

If a curved polyline has very large distances between vertices, it may appear angular or jagged, depending on the scale at which it is viewed (see Şekil 3.18). Because of this it is important that polylines are digitised (captured into the computer) with distances between vertices that are small enough for the scale at which you want to use the data.

../../_images/jagged_polyline.png

Şekil 3.18 Polylines viewed at a smaller scale (1:20 000 to the left) may appear smooth and curved. When zoomed in to a larger scale (1:500 to the right) polylines may look very angular.

The attributes of a polyline describe its properties or characteristics. For example a road polyline may have attributes that describe whether it is surfaced with gravel or tar, how many lanes it has, whether it is a one way street, and so on. The GIS can use these attributes to symbolise the polyline feature with a suitable colour or line style.

3.4. Polygon features in detail

Polygon features are enclosed areas like dams, islands, country boundaries and so on. Like polyline features, polygons are created from a series of vertices that are connected with a continuous line. However because a polygon always describes an enclosed area, the first and last vertices should always be at the same place! Polygons often have shared geometry –– boundaries that are in common with a neighbouring polygon. Many GIS applications have the capability to ensure that the boundaries of neighbouring polygons exactly coincide. We will explore this in the Topoloji topic later in this tutorial.

As with points and polylines, polygons have attributes. The attributes describe each polygon. For example a dam may have attributes for depth and water quality.

3.5. Vector data in layers

Now that we have described what vector data is, let’s look at how vector data is managed and used in a GIS environment. Most GIS applications group vector features into layers. Features in a layer have the same geometry type (e.g. they will all be points) and the same kinds of attributes (e.g. information about what species a tree is for a trees layer). For example if you have recorded the positions of all the footpaths in your school, they will usually be stored together on the computer hard disk and shown in the GIS as a single layer. This is convenient because it allows you to hide or show all of the features for that layer in your GIS application with a single mouse click.

3.6. Editing vector data

The GIS application will allow you to create and modify the geometry data in a layer –– a process called digitising –– which we will look at more closely in a later tutorial. If a layer contains polygons (e.g. farm dams), the GIS application will only allow you to create new polygons in that layer. Similarly if you want to change the shape of a feature, the application will only allow you to do it if the changed shape is correct. For example it won’t allow you to edit a line in such a way that it has only one vertex –– remember in our discussion of lines above that all lines must have at least two vertices.

Creating and editing vector data is an important function of a GIS since it is one of the main ways in which you can create personal data for things you are interested in. Say for example you are monitoring pollution in a river. You could use the GIS to digitise all outfalls for storm water drains (as point features). You could also digitise the river itself (as a polyline feature). Finally you could take readings of pH levels along the course of the river and digitise the places where you made these readings (as a point layer).

As well as creating your own data, there is a lot of free vector data that you can obtain and use. For example, you can obtain vector data that appears on the 1:50 000 map sheets from the Chief Directorate: Surveys and Mapping.

3.7. Scale and vector data

Map scale is an important issue to consider when working with vector data in a GIS. When data is captured, it is usually digitised from existing maps, or by taking information from surveyor records and global positioning system devices. Maps have different scales, so if you import vector data from a map into a GIS environment (for example by digitising paper maps), the digital vector data will have the same scale issues as the original map. This effect can be seen in illustrations Şekil 3.19 and Şekil 3.20. Many issues can arise from making a poor choice of map scale. For example using the vector data in illustration Şekil 3.19 to plan a wetland conservation area could result in important parts of the wetland being left out of the reserve! On the other hand if you are trying to create a regional map, using data captured at 1:1000 000 might be just fine and will save you a lot of time and effort capturing the data.

../../_images/small_scale.png

Şekil 3.19 Vector data (red lines) that was digitised from a small scale (1:1000 000) map.

../../_images/large_scale.png

Şekil 3.20 Vector data (green lines) that was digitised from a large scale (1:50 000) map.

3.8. Symbology

When you add vector layers to the map view in a GIS application, they will be drawn with random colours and basic symbols. One of the great advantages of using a GIS is that you can create personalised maps very easily. The GIS program will let you choose colours to suite the feature type (e.g. you can tell it to draw a water bodies vector layer in blue). The GIS will also let you adjust the symbol used. So if you have a trees point layer, you can show each tree position with a small picture of a tree, rather than the basic circle marker that the GIS uses when you first load the layer (see illustrations Şekil 3.21, Şekil 3.22 and Şekil 3.23).

../../_images/symbology_settings.png

Şekil 3.21 In the GIS, you can use a panel (like the one above) to adjust how features in your layer should be drawn.

../../_images/symbology_generic.png

Şekil 3.22 When a layer (for example the trees layer above) is first loaded, a GIS application will give it a generic symbol.

../../_images/symbology_custom.png

Şekil 3.23 After making our adjustments it is much easier to see that our points represent trees.

Symbology is a powerful feature, making maps come to life and the data in your GIS easier to understand. In the topic that follows (Vektör Özellik Verisi) we will explore more deeply how symbology can help the user to understand vector data.

3.9. What can we do with vector data in a GIS?

At the simplest level we can use vector data in a GIS Application in much the same way you would use a normal topographic map. The real power of GIS starts to show itself when you start to ask questions like ‘which houses are within the 100 year flood level of a river?’; ‘where is the best place to put a hospital so that it is easily accessible to as many people as possible?’; ‘which learners live in a particular suburb?’. A GIS is a great tool for answering these types of questions with the help of vector data. Generally we refer to the process of answering these types of questions as spatial analysis. In later topics of this tutorial we will look at spatial analysis in more detail.

3.10. Common problems with vector data

Working with vector data does have some problems. We already mentioned the issues that can arise with vectors captured at different scales. Vector data also needs a lot of work and maintenance to ensure that it is accurate and reliable. Inaccurate vector data can occur when the instruments used to capture the data are not properly set up, when the people capturing the data aren’t being careful, when time or money don’t allow for enough detail in the collection process, and so on.

If you have poor quality vector data, you can often detect this when viewing the data in a GIS. For example slivers can occur when the edges of two polygon areas don’t meet properly (see Şekil 3.24).

../../_images/vector_slivers.png

Şekil 3.24 Slivers occur when the vertices of two polygons do not match up on their borders. At a small scale (e.g. 1 on left) you may not be able to see these errors. At a large scale they are visible as thin strips between two polygons (2 on right).

Overshoots can occur when a line feature such as a road does not meet another road exactly at an intersection. Undershoots can occur when a line feature (e.g. a river) does not exactly meet another feature to which it should be connected. Figure Şekil 3.25 demonstrates what undershoots and overshoots look like.

../../_images/vector_overshoots.png

Şekil 3.25 Undershoots (1) occur when digitised vector lines that should connect to each other don’t quite touch. Overshoots (2) happen if a line ends beyond the line it should connect to.

Because of these types of errors, it is very important to digitise data carefully and accurately. In the upcoming topic on topology, we will examine some of these types of errors in more detail.

3.11. Neler öğrendik ?

Bu çalışma sayfasında ele aldığımız şeyleri toplayalım:

  • Vector data is used to represent real world features in a GIS.

  • A vector feature can have a geometry type of point, line or a polygon.

  • Each vector feature has attribute data that describes it.

  • Feature geometry is described in terms of vertices.

  • Point geometries are made up of a single vertex (X,Y and optionally Z).

  • Polyline geometries are made up of two or more vertices forming a connected line.

  • Polygon geometries are made up of at least four vertices forming an enclosed area. The first and last vertices are always in the same place.

  • Choosing which geometry type to use depends on scale, convenience and what you want to do with the data in the GIS.

  • Most GIS applications do not allow you to mix more than one geometry type in a single layer.

  • Digitising is the process of creating digital vector data by drawing it in a GIS application.

  • Vector data can have quality issues such as undershoots, overshoots and slivers which you need to be aware of.

  • Vector data can be used for spatial analysis in a GIS application, for example to find the nearest hospital to a school.

We have summarised the GIS Vector Data concept in Figure Şekil 3.26.

../../_images/vector_summary.png

Şekil 3.26 This diagram shows how GIS applications deal with vector data.

3.12. Şimdi deneyin !

İşte öğrencilerinizle denemeniz için bazı fikirler:

  • Using a copy of a toposheet map for your local area (like the one shown in Şekil 3.27), see if your learners can identify examples of the different types of vector data by highlighting them on the map.

  • Think of how you would create vector features in a GIS to represent real world features on your school grounds. Create a table of different features in and around your school and then task your learners to decide whether they would be best represented in the GIS as a point, line or polygon. See table_vector_1 for an example.

../../_images/sample_map.png

Şekil 3.27 Can you identify two point features and one polygon feature on this map?

Real world feature

Suitable Geometry Type

The school flagpole

The soccer field

The footpaths in and around the school

Places where taps are located

Etc.

Table Vector 1: Create a table like this (leaving the geometry type column empty) and ask your learners to decide on suitable geometry types.

3.13. Düşünmek için bir şey

If you don’t have a computer available, you can use a toposheet and transparency sheets to show your learners about vector data.

3.14. Göster

The QGIS User Guide also has more detailed information on working with vector data in QGIS.

3.15. Sırada Ne Var?

In the section that follows we will take a closer look at attribute data to see how it can be used to describe vector features.