7.1. Lesson: Reproyectando y Transformando Datos

Let us talk about Coordinate Reference Systems (CRSs) again. We have touched on this briefly before, but haven’t discussed what it means practically.

El objetivo de esta lección: Reproyectar y transformar conjuntos de datos vectoriales.

7.1.1. basic Follow Along: Proyecciones

The CRS that all the data, as well as the map itself are in right now is called WGS84. This is a very common Geographic Coordinate System (GCS) for representing data. But there’s a problem, as we will see.

  1. Save your current map

  2. Then open the map of the world which you will find under exercise_data/world/world.qgs

  3. Zoom in to South Africa by using the Zoom In tool

  4. Try setting a scale in the Scale field, which is in the Statusbar along the bottom of the screen. While over South Africa, set this value to 1:5 000 000 (one to five million).

  5. Pan around the map while keeping an eye on the Scale field

Notice the scale changing? That’s because you are moving away from the one point that you zoomed into at 1:5 000 000, which was at the center of your screen. All around that point, the scale is different.

Para entender por qué, piensa en el Globo Terráqueo. Tiene lineas discurriendo de Norte a Sur. Estas líneas están alejadas en el ecuador, pero se encuentran en los polos.

In a GCS, you are working on this sphere, but your screen is flat. When you try to represent the sphere on a flat surface, distortion occurs, similar to what would happen if you cut open a tennis ball and tried to flatten it out. What this means on a map is that the longitude lines stay equally far apart from each other, even at the poles (where they are supposed to meet). This means that, as you travel away from the equator on your map, the scale of the objects that you see gets larger and larger. What this means for us, practically, is that there is no constant scale on our map!

Para solucionar esto, utilicemos en su lugar un Sistema de Coordenadas Proyectado (SCP). Un SCP «proyecta» o convierte los datos en una forma que permite a la escala cambiar y corregirse. Además, para mantener la escala constante, deberiamos reproyectar nuestros datos a usar un SCP.

7.1.2. basic Follow Along: Reproyección «Al Vuelo»

By default, QGIS reprojects data «on the fly». What this means is that even if the data itself is in another CRS, QGIS can project it as if it were in a CRS of your choice.

You can change the CRS of the project by clicking on the projectionEnabled Current projection button in the bottom right corner of QGIS.

  1. In the dialog that appears, type the word global into the Filter field. A few CRSs should appear in the Predefined Reference Systems field below.

  2. Select WGS 84 / NSIDC EASE-Grid 2.0 Global | EPSG:6933 entry by clicking on it, and then click OK.

    Observa cómo cambia la forma de Sudáfrica. Todas las proyecciones funcionan cambiando las formas aparentes de los objetos de la Tierra.

  3. Zoom to a scale of 1:5 000 000 again, as before.

  4. Desplázate sobre el mapa.

    ¡Observa cómo la escala permanece igual!

La transformación» al vuelo» también se usa para combinar conjuntos de datos que están en diferentes SRCs.

  1. Add another vector layer to your map which has the data for South Africa only. You will find it as exercise_data/world/RSA.shp.

  2. Load it. A quick way to see its CRS is by hovering the mouse over the layer in the legend. It is EPSG:3410.

    ¿Qué observas?

    The layer is visible even if it has a different CRS from the continents one.

7.1.3. moderate Follow Along: Guardando un Conjunto de Datos en Otro SRC

Sometimes you need to export an existing dataset with another CRS. As we will see in the next lesson, if you need to make distance calculations on layer, it is always better to have the layer in a projected coordinate system.

Be aware that the “on the fly” reprojection is related to the project and not to single layers. This means that a layer can have a different CRS from the project even if you see it in the correct position.

You can easily export the layer with another CRS.

  1. Add the buildings dataset from training_data.gpkg

  2. Right-click on the buildings layer in the Layers panel

  3. Select Export ‣ Save Features As… in the menu that appears. You will be shown the Save Vector Layer as… dialog.

  4. Click on the Browse button next to the File name field

  5. Navigate to exercise_data/ and specify the name of the new layer as buildings_reprojected.shp.

  6. Change the value of the CRS. Only the recent CRSs used will be shown in the drop-down menu. Click on the setProjection Select projection button next to the drop-down menu.

  7. The Coordinate Reference System Selector dialog will appear. In its Filter field, search for 34S.

  8. Select WGS 84 / UTM zone 34S | EPSG:32734 from the list

  9. Leave the other options unchanged. The Save Vector Layer as… dialog now looks like this:

  10. Haz clic en Aceptar.

You can now compare the old and new projections of the layer and see that they are in two different CRS but they are still overlapping.

7.1.4. hard Follow Along: Creando Tu Propia Proyección

Hay muchos más proyecciones que las incluidas en QGIS por defecto. Además, también puedes crear tus propias proyecciones.

  1. Start a new map

  2. Load the world/oceans.shp dataset

  3. Go to Settings ‣ Custom Projections… and you will see this dialog.

  4. Click on the signPlus Add new CRS button to create a new projection

  5. An interesting projection to use is called Van der Grinten I. Enter its name in the Name field.

    Esta proyección representa la Tierra en un campo circular en lugar de una zona rectangular, como la mayoría de proyecciones hacen.

  6. Add the following string in the Parameters field:

    +proj=vandg +lon_0=0 +x_0=0 +y_0=0 +R_A +a=6371000 +b=6371000 +units=m +no_defs
  7. Haz clic en Aceptar.

  8. Click on the projectionEnabled Current CRS button to change the project CRS

  9. Choose your newly defined projection (search for its name in the Filter field)

  10. Aplicando esta proyección, el mapa será reproyectado así:


7.1.5. In Conclusion

Proyecciones diferentes son útiles para diferentes propósitos. Eligiendo la proyección correcta, puedes asegurarte que los elementos de tu mapa se están representando de forma precisa.

7.1.6. Further Reading

Materials for the Advanced section of this lesson were taken from this article.

Further information on Coordinate Reference Systems is available here.

7.1.7. What’s Next?

In the next lesson you will learn how to analyze vector data using QGIS” various vector analysis tools.