13.3. Exploring Data Formats and Fields

13.3.1. Raster data

GIS raster data are matrices of discrete cells that represent features / phenomena on, above or below the earth’s surface. Each cell in the raster grid has the same size, and cells are usually rectangular (in QGIS they will always be rectangular). Typical raster datasets include remote sensing data, such as aerial photography, or satellite imagery and modelled data, such as elevation or temperature.

Unlike vector data, raster data typically do not have an associated database record for each cell. They are geocoded by pixel resolution and the X/Y coordinate of a corner pixel of the raster layer. This allows QGIS to position the data correctly on the map canvas.

The GeoPackage format is convenient for storing raster data when working with QGIS. The popular and powerful GeoTiff format is a good alternative.

QGIS makes use of georeference information inside the raster layer (e.g., GeoTiff) or an associated world file to properly display the data.

13.3.2. Dado Vetorial

Many of the features and tools available in QGIS work the same, regardless the vector data source. However, because of the differences in format specifications (GeoPackage, ESRI Shapefile, MapInfo and MicroStation file formats, AutoCAD DXF, PostGIS, SpatiaLite, DB2, Oracle Spatial, MSSQL Spatial databases, and many more), QGIS may handle some of their properties differently. Support is provided by the OGR Simple Feature Library. This section describes how to work with these specificities.

Nota

QGIS supports (multi)point, (multi)line, (multi)polygon, CircularString, CompoundCurve, CurvePolygon, MultiCurve, MultiSurface feature types, all optionally with Z and/or M values.

You should also note that some drivers don’t support some of these feature types, like CircularString, CompoundCurve, CurvePolygon, MultiCurve, MultiSurface feature type. QGIS will convert them.

13.3.2.1. GeoPackage

The GeoPackage (GPKG) format is platform-independent, and is implemented as a SQLite database container, and can be used to store both vector and raster data. The format was defined by the Open Geospatial Consortium (OGC), and was published in 2014.

GeoPackage can be used to store the following in a SQLite database:

  • vector features

  • tile matrix sets of imagery and raster maps

  • attributes (non-spatial data)

  • extensions

Since QGIS version 3.8, GeoPackage can also store QGIS projects. GeoPackage layers can have JSON fields.

GeoPackage é o formato padrão para dados vetoriais no QGIS.

13.3.2.2. ESRI Shapefile format

The ESRI Shapefile format is still one of the most used vector file formats, even if it has some limitations compared to for instance GeoPackage and SpatiaLite.

An ESRI Shapefile format dataset consists of several files. The following three are required:

  1. .shp file containing the feature geometries

  2. .dbf arquivo que contém os atributos no formato dBase

  3. .shx index file

An ESRI Shapefile format dataset can also include a file with a .prj suffix, which contains projection information. While it is very useful to have a projection file, it is not mandatory. A Shapefile format dataset can contain additional files. For further details, see the the ESRI technical specification at https://www.esri.com/library/whitepapers/pdfs/shapefile.pdf.

GDAL 3.1 has read-write support for compressed ESRI Shapefile format (shz and shp.zip).

Improving Performance for ESRI Shapefile format datasets

To improve the drawing performance for an ESRI Shapefile format dataset, you can create a spatial index. A spatial index will improve the speed of both zooming and panning. Spatial indexes used by QGIS have a .qix extension.

Use these steps to create the index:

  1. Load an ESRI Shapefile format dataset (see The Browser Panel)

  2. Abra a caixa de diálogo Propriedades da Camada clicando duas vezes no nome da camada na legenda ou clicando com o botão direito do mouse e escolhendo Propriedades… no menu de contexto

  3. In the Source tab, click the Create Spatial Index button

Problem loading a .prj file

If you load an ESRI Shapefile format dataset with a .prj file and QGIS is not able to read the coordinate reference system from that file, you will need to define the proper projection manually in the Layer Properties ► Source tab of the layer by clicking the setProjection Select CRS button. This is due to the fact that .prj files often do not provide the complete projection parameters as used in QGIS and listed in the CRS dialog.

For the same reason, if you create a new ESRI Shapefile format dataset with QGIS, two different projection files are created: a .prj file with limited projection parameters, compatible with ESRI software, and a .qpj file, providing all the parameters of the CRS. Whenever QGIS finds a .qpj file, it will be used instead of the .prj.

13.3.2.3. Delimited Text Files

Arquivos de texto delimitados são muito comuns e amplamente utilizados devido à sua simplicidade e legibilidade - os dados podem ser visualizados e editados em um editor de texto simples. Um arquivo de texto delimitado é um dado de tabela com colunas separadas por um caractere definido e linhas separadas por quebras de linha. A primeira linha geralmente contém os nomes das colunas. Um tipo comum de arquivo de texto delimitado é um CSV (Comma Separated Values), com colunas separadas por vírgulas. Arquivos de texto delimitados também podem conter informações posicionais (veja Storing geometry information in delimited text files).

QGIS allows you to load a delimited text file as a layer or an ordinary table (see The Browser Panel or Importing a delimited text file). First check that the file meets the following requirements:

  1. The file must have a delimited header row of field names. This must be the first line of the data (ideally the first row in the text file).

  2. If geometry should be enabled, the file must contain field(s) that define the geometry. These field(s) can have any name.

  3. The X and Y coordinates fields (if geometry is defined by coordinates) must be specified as numbers. The coordinate system is not important.

  4. If you have a CSV file with non-string columns, you must have an accompanying CSVT file (see section Using CSVT file to control field formatting).

The elevation point data file elevp.csv in the QGIS sample dataset (see section Baixando dados de amostra) is an example of a valid text file:

X;Y;ELEV
-300120;7689960;13
-654360;7562040;52
1640;7512840;3
[...]

Some things to note about the text file:

  1. The example text file uses ; (semicolon) as delimiter (any character can be used to delimit the fields).

  2. The first row is the header row. It contains the fields X, Y and ELEV.

  3. No quotes (") are used to delimit text fields

  4. The X coordinates are contained in the X field

  5. The Y coordinates are contained in the Y field

Storing geometry information in delimited text files

Delimited text files can contain geometry information in two main forms:

  • As coordinates in separate columns (eg. Xcol, Ycol… ), for point geometry data;

  • As well-known text (WKT) representation of geometry in a single column, for any geometry type.

Features with curved geometries (CircularString, CurvePolygon and CompoundCurve) are supported. Here are some examples of geometry types in a delimited text file with geometries coded as WKT:

Label;WKT_geom
LineString;LINESTRING(10.0 20.0, 11.0 21.0, 13.0 25.5)
CircularString;CIRCULARSTRING(268 415,227 505,227 406)
CurvePolygon;CURVEPOLYGON(CIRCULARSTRING(1 3, 3 5, 4 7, 7 3, 1 3))
CompoundCurve;COMPOUNDCURVE((5 3, 5 13), CIRCULARSTRING(5 13, 7 15,
  9 13), (9 13, 9 3), CIRCULARSTRING(9 3, 7 1, 5 3))

Delimited text files also support Z and M coordinates in geometries:

LINESTRINGZ(10.0 20.0 30.0, 11.0 21.0 31.0, 11.0 22.0 30.0)

Using CSVT file to control field formatting

When loading CSV files, the OGR driver assumes all fields are strings (i.e. text) unless it is told otherwise. You can create a CSVT file to tell OGR (and QGIS) the data type of the different columns:

Tipo

Nome

Exemplo

Whole number

Número inteiro

4

Decimal number

Real

3.456

Data

Date (YYYY-MM-DD)

2016-07-28

Time

Hora (HH:MM:SS+nn)

18:33:12+00

Date & Time

DateTime (YYYY-MM-DD HH:MM:SS+nn)

2016-07-28 18:33:12+00

The CSVT file is a ONE line plain text file with the data types in quotes and separated by commas, e.g.:

"Integer","Real","String"

You can even specify width and precision of each column, e.g.:

"Integer(6)","Real(5.5)","String(22)"

This file is saved in the same folder as the .csv file, with the same name, but .csvt as the extension.

*Você pode encontrar mais informações em * GDAL CSV Driver.

13.3.2.4. Camadas PostGIS

PostGIS layers are stored in a PostgreSQL database. The advantages of PostGIS are spatial indexing, filtering and querying capabilities. Using PostGIS, vector functions such as select and identify work more accurately than they do with OGR layers in QGIS.

Dica

Camadas PostGIS

Normally, a PostGIS layer is identified by an entry in the geometry_columns table. QGIS can load layers that do not have an entry in the geometry_columns table. This includes both tables and views. Refer to your PostgreSQL manual for information on creating views.

This section contains some details on how QGIS accesses PostgreSQL layers. Most of the time, QGIS should simply provide you with a list of database tables that can be loaded, and it will load them on request. However, if you have trouble loading a PostgreSQL table into QGIS, the information below may help you understand QGIS messages and give you directions for modifying the PostgreSQL table or view definition to allow QGIS to load it.

Primary key

QGIS requires that PostgreSQL layers contain a column that can be used as a unique key for the layer. For tables, this usually means that the table needs a primary key, or a column with a unique constraint on it. In QGIS, this column needs to be of type int4 (an integer of size 4 bytes). Alternatively, the ctid column can be used as primary key. If a table lacks these items, the oid column will be used instead. Performance will be improved if the column is indexed (note that primary keys are automatically indexed in PostgreSQL).

QGIS offers a checkbox Select at id that is activated by default. This option gets the ids without the attributes, which is faster in most cases.

Ver

Se a camada do PostgreSQL é uma visualização, o mesmo requisito existe, mas as visualizações nem sempre possuem chaves ou colunas primárias com restrições exclusivas. Você precisa definir um campo de chave primária (deve ser inteiro) na caixa de diálogo QGIS antes de poder carregar a exibição. Se uma coluna adequada não existir na exibição, o QGIS não carregará a camada. Se isso ocorrer, a solução é alterar a exibição para incluir uma coluna adequada (um tipo de número inteiro e uma chave primária ou com uma restrição exclusiva, preferencialmente indexada).

As for table, a checkbox Select at id is activated by default (see above for the meaning of the checkbox). It can make sense to disable this option when you use expensive views.

QGIS layer_style table and database backup

If you want to make a backup of your PostGIS database using the pg_dump and pg_restore commands, and the default layer styles as saved by QGIS fail to restore afterwards, you need to set the XML option to DOCUMENT before the restore command:

SET XML OPTION DOCUMENT;

Filter database side

QGIS allows to filter features already on server side. Check Settings ► Options ► Data Sources ► checkbox Execute expressions on server-side if possible to do so. Only supported expressions will be sent to the database. Expressions using unsupported operators or functions will gracefully fallback to local evaluation.

Support of PostgreSQL data types

Data types supported by the PostgreSQL provider include: integer, float, boolean, binary object, varchar, geometry, timestamp, array, hstore and json.

13.3.2.5. Importing Data into PostgreSQL

Data can be imported into PostgreSQL/PostGIS using several tools, including the DB Manager plugin and the command line tools shp2pgsql and ogr2ogr.

Gerenciador BD

O QGIS vem com um complemento principal chamado dbManager Gerenciador de BD. Ele pode ser usado para carregar dados e inclui suporte para esquemas. Veja a seção DB Manager Plugin para mais informações.

shp2pgsql

PostGIS includes a utility called shp2pgsql, that can be used to import Shapefile format datasets into a PostGIS-enabled database. For example, to import a Shapefile format dataset named lakes.shp into a PostgreSQL database named gis_data, use the following command:

shp2pgsql -s 2964 lakes.shp lakes_new | psql gis_data

This creates a new layer named lakes_new in the gis_data database. The new layer will have a spatial reference identifier (SRID) of 2964. See section Trabalhando com Projeções for more information about spatial reference systems and projections.

Dica

Exporting datasets from PostGIS

There is also a tool for exporting PostGIS datasets to Shapefile format: pgsql2shp. It is shipped within your PostGIS distribution.

ogr2ogr

In addition to shp2pgsql and DB Manager, there is another tool for feeding geographical data in PostGIS: ogr2ogr. It is part of your GDAL installation.

To import a Shapefile format dataset into PostGIS, do the following:

ogr2ogr -f "PostgreSQL" PG:"dbname=postgis host=myhost.de user=postgres
password=topsecret" alaska.shp

This will import the Shapefile format dataset alaska.shp into the PostGIS database postgis using the user postgres with the password topsecret on the host server myhost.de.

Note that OGR must be built with PostgreSQL to support PostGIS. You can verify this by typing (in nix):

ogrinfo --formats | grep -i post

If you prefer to use the PostgreSQL’s COPY command instead of the default INSERT INTO method, you can export the following environment variable (at least available on nix and osx):

export PG_USE_COPY=YES

ogr2ogr does not create spatial indexes like shp2pgsl does. You need to create them manually, using the normal SQL command CREATE INDEX afterwards, as an extra step (as described in the next section Improving Performance).

Improving Performance

Retrieving features from a PostgreSQL database can be time-consuming, especially over a network. You can improve the drawing performance of PostgreSQL layers by ensuring that a PostGIS spatial index exists on each layer in the database. PostGIS supports creation of a GiST (Generalized Search Tree) index to speed up spatial searching (GiST index information is taken from the PostGIS documentation available at https://postgis.net).

Dica

You can use the DBManager to create an index for your layer. You should first select the layer and click on Table ► Edit table, go to Indexes tab and click on Add Spatial Index.

The syntax for creating a GiST index is:

CREATE INDEX [indexname] ON [tablename]
  USING GIST ( [geometryfield] GIST_GEOMETRY_OPS );

Note that for large tables, creating the index can take a long time. Once the index is created, you should perform a VACUUM ANALYZE. See the PostGIS documentation (POSTGIS-PROJECT in Referências Bibliográficas e Web) for more information.

The following example creates a GiST index:

gsherman@madison:~/current$ psql gis_data
Welcome to psql 8.3.0, the PostgreSQL interactive terminal.

Type:  \copyright for distribution terms
       \h for help with SQL commands
       \? for help with psql commands
       \g or terminate with semicolon to execute query
       \q to quit

gis_data=# CREATE INDEX sidx_alaska_lakes ON alaska_lakes
gis_data-# USING GIST (the_geom GIST_GEOMETRY_OPS);
CREATE INDEX
gis_data=# VACUUM ANALYZE alaska_lakes;
VACUUM
gis_data=# \q
gsherman@madison:~/current$

13.3.2.6. Vector layers crossing 180° longitude

Many GIS packages don’t wrap vector maps with a geographic reference system (lat/lon) crossing the 180 degrees longitude line (http://postgis.refractions.net/documentation/manual-2.0/ST_Shift_Longitude.html). As result, if we open such a map in QGIS, we could see two widely separated locations, that should appear near each other. In Fig. 13.23, the tiny point on the far left of the map canvas (Chatham Islands) should be within the grid, to the right of the New Zealand main islands.

../../../_images/vectorNotWrapping.png

Fig. 13.23 Map in lat/lon crossing the 180° longitude line

A work-around is to transform the longitude values using PostGIS and the ST_Shift_Longitude function. This function reads every point/vertex in every component of every feature in a geometry, and if the longitude coordinate is < 0°, it adds 360° to it. The result is a 0° - 360° version of the data to be plotted in a 180°-centric map.

../../../_images/vectorWrapping.png

Fig. 13.24 Crossing 180° longitude applying the ST_Shift_Longitude function

Utilização

  • Import data into PostGIS (Importing Data into PostgreSQL) using, for example, the DB Manager plugin.

  • Use the PostGIS command line interface to issue the following command (in this example, “TABLE” is the actual name of your PostGIS table): gis_data=# update TABLE set the_geom=ST_Shift_Longitude(the_geom);

  • If everything went well, you should receive a confirmation about the number of features that were updated. Then you’ll be able to load the map and see the difference (Figure_vector_crossing_map).

13.3.2.7. Camadas SpatiaLite

If you want to save a vector layer using the SpatiaLite format, you can do this by following instructions at Creating new layers from an existing layer. You select SpatiaLite as Format and enter both File name and Layer name.

Also, you can select SQLite as format and then add SPATIALITE=YES in the Custom Options ► Data source field. This tells GDAL to create a SpatiaLite database. See also https://gdal.org/drivers/vector/sqlite.html.

QGIS also supports editable views in SpatiaLite. For SpatiaLite data management, you can also use the core plugin DB Manager.

Se você deseja criar uma nova camada SpatiaLite, por favor consulte a seção Creating a new SpatiaLite layer.

13.3.2.8. GeoJSON specific parameters

When exporting layers to GeoJSON, there are some specific Layer Options available. These options come from GDAL which is responsible for the writing of the file:

  • COORDINATE_PRECISION the maximum number of digits after the decimal separator to write in coordinates. Defaults to 15 (note: for Lat Lon coordinates 6 is considered enough). Truncation will occur to remove trailing zeros.

  • RFC7946 by default GeoJSON 2008 will be used. If set to YES, the updated RFC 7946 standard will be used. Default is NO (thus GeoJSON 2008). See https://gdal.org/drivers/vector/geojson.html#rfc-7946-write-support for the main differences, in short: only EPSG:4326 is allowed, other crs’s will be transformed, polygons will be written such as to follow the right-hand rule for orientation, values of a “bbox” array are [west, south, east, north], not [minx, miny, maxx, maxy]. Some extension member names are forbidden in FeatureCollection, Feature and Geometry objects, the default coordinate precision is 7 decimal digits

  • WRITE_BBOX set to YES to include the bounding box of the geometries at the feature and feature collection level

Besides GeoJSON there is also an option to export to “GeoJSON - Newline Delimited” (see https://gdal.org/drivers/vector/geojsonseq.html). Instead of a FeatureCollection with Features, you can stream one type (probably only Features) sequentially separated with newlines.

GeoJSON - Newline Delimited has some specific Layer options availabe too:

  • COORDINATE_PRECISION see above (same as for GeoJSON)

  • RS whether to start records with the RS=0x1E character. The difference is how the features are separated: only by a newline (LF) character (Newline Delimited JSON, geojsonl) or by also prepending a record-separator (RS) character (giving GeoJSON Text Sequences, geojsons). Default to NO. Files are given the .json extension if extension is not provided.

13.3.2.9. DB2 Spatial Layers

IBM DB2 for Linux, Unix and Windows (DB2 LUW), IBM DB2 for z/OS (mainframe) and IBM DashDB products allow users to store and analyse spatial data in relational table columns. The DB2 provider for QGIS supports the full range of visualization, analysis and manipulation of spatial data in these databases.

User documentation on these capabilities can be found at the DB2 z/OS KnowledgeCenter, DB2 LUW KnowledgeCenter and DB2 DashDB KnowledgeCenter.

For more information about working with the DB2 spatial capabilities, check out the DB2 Spatial Tutorial on IBM DeveloperWorks.

The DB2 provider currently only supports the Windows environment through the Windows ODBC driver.

The client running QGIS needs to have one of the following installed:

  • DB2 LUW

  • IBM Data Server Driver Package

  • IBM Data Server Client

To open a DB2 data in QGIS, see the The Browser Panel or Loading a Database Layer section.

If you are accessing a DB2 LUW database on the same machine or using DB2 LUW as a client, the DB2 executables and supporting files need to be included in the Windows path. This can be done by creating a batch file like the following with the name db2.bat and including it in the directory %OSGEO4W_ROOT%/etc/ini:

@echo off
REM Point the following to where DB2 is installed
SET db2path=C:\Program Files (x86)\sqllib
REM This should usually be ok - modify if necessary
SET gskpath=C:\Program Files (x86)\ibm\gsk8
SET Path=%db2path%\BIN;%db2path%\FUNCTION;%gskpath%\lib64;%gskpath%\lib;%path%