|LS| Supplementary Exercise ====================================================================== In this lesson, you will be guided through a complete GIS analysis in QGIS. .. note:: Lesson developed by Linfiniti Consulting (South Africa) and Siddique Motala (Cape Peninsula University of Technology) Problem Statement ---------------------------------------------------------------------- You are tasked with finding areas in and around the Cape Peninsula that are suitable habitats for a rare fynbos plant species. The extent of your area of investigation covers Cape Town and the Cape Peninsula between Melkbosstrand in the north and Strand in the south. Botanists have provided you with the following preferences exhibited by the species in question: * It grows on east facing slopes * It grows on slopes with a gradient between 15% and 60% * It grows in areas that have a total annual rainfall of > 1000 mm * It will only be found at least 250 m away from any human settlement * The area of vegetation in which it occurs should be at least 6000 ㎡ in area As a student at the University, you have agreed to search for the plant in four different suitable areas of land. You want those four suitable areas to be the ones that are closest to the University of Cape Town where you live. Use your GIS skills to determine where you should go to look. Solution Outline ---------------------------------------------------------------------- The data for this exercise can be found in the :file:`exercise_data/more_analysis` folder. You are going to find the four suitable areas that are closest to the University of Cape Town. The solution will involve: #. Analysing a DEM raster layer to find the east facing slopes and the slopes with the correct gradients #. Analysing a rainfall raster layer to find the areas with the correct amount of rainfall #. Analysing a zoning vector layer to find areas that are away from human settlement and are of the correct size |FA| Setting up the Map ---------------------------------------------------------------------- #. Click on the |projectionEnabled| :sup:`Current CRS` button in the lower right corner of the screen. Under the :guilabel:`CRS` tab of the dialog that appears, use the "Filter" tool to search for "33S". Select the entry :guilabel:`WGS 84 / UTM zone 33S` (with EPSG code ``32733``). #. Click :guilabel:`OK` #. Save the project file by clicking on the |fileSave| :sup:`Save Project` toolbar button, or use the :menuselection:`File --> Save As...` menu item. Save it in a new directory called :file:`Rasterprac`, that you should create somewhere on your computer. You will save whatever layers you create in this directory as well. Save the project as :file:`your_name_fynbos.qgs`. Loading Data into the Map ---------------------------------------------------------------------- In order to process the data, you will need to load the necessary layers (street names, zones, rainfall, DEM, districts) into the map canvas. For vectors... ...................................................................... #. Click on the |dataSourceManager| :sup:`Open Data Source Manager` button in the *Data Source Manager Toolbar*, and enable the |addOgrLayer| :guilabel:`Vector` tab in the dialog that appears, or use the :menuselection:`Layer --> Add Layer -->` |addOgrLayer| :menuselection:`Add Vector Layer...` menu item #. Ensure that |radioButtonOn| :guilabel:`File` is selected #. Click on the :guilabel:`...` button to browse for vector dataset(s) #. In the dialog that appears, open the :file:`exercise_data/more_analysis/Streets` directory #. Select the file :file:`Street_Names_UTM33S.shp` #. Click :guilabel:`Open`. The dialog closes and shows the original dialog, with the file path specified in the text field next to :guilabel:`Vector dataset(s)`. This allows you to ensure that the correct file is selected. It is also possible to enter the file path in this field manually, should you wish to do so. #. Click :guilabel:`Add`. The vector layer will be loaded into your map. Its color is automatically assigned. You will change it later. #. Rename the layer to ``Streets`` #. Right-click on it in the :guilabel:`Layers` panel (by default, the pane along the left-hand side of the screen) #. Click :guilabel:`Rename` in the dialog that appears and rename it, pressing the :kbd:`Enter` key when done #. Repeat the vector adding process, but this time select the :file:`Generalised_Zoning_Dissolve_UTM33S.shp` file in the :file:`Zoning` directory. #. Rename it to ``Zoning``. #. Load also the vector layer :file:`admin_boundaries/Western_Cape_UTM33S.shp` into your map. #. Rename it to ``Districts``. For rasters... ...................................................................... #. Click on the |dataSourceManager| :sup:`Open Data Source Manager` button and enable the |addRasterLayer| :guilabel:`Raster` tab in the dialog that appears, or use the :menuselection:`Layer --> Add Layer -->` |addRasterLayer| :menuselection:`Add Raster Layer...` menu item #. Ensure that |radioButtonOn| :guilabel:`File` is selected #. Navigate to the appropriate file, select it, and click :guilabel:`Open` #. Do this for each of the following two raster files, :file:`DEM/SRTM.tif` and :file:`rainfall/reprojected/rainfall.tif` #. Rename the SRTM raster to ``DEM`` and the rainfall raster to ``Rainfall`` (with an initial capital) Changing the layer order ---------------------------------------------------------------------- Click and drag layers up and down in the :guilabel:`Layers` panel to change the order they appear in on the map so that you can see as many of the layers as possible. Now that all the data is loaded and properly visible, the analysis can begin. It is best if the clipping operation is done first. This is so that no processing power is wasted on computing values in areas that are not going to be used anyway. Find the Correct Districts ---------------------------------------------------------------------- Due to the aforementioned area of investigation, we need to limit our districts to the following ones: * ``Bellville`` * ``Cape`` * ``Goodwood`` * ``Kuils River`` * ``Mitchells Plain`` * ``Simon Town`` * ``Wynberg`` #. Right-click on the ``Districts`` layer in the :guilabel:`Layers` panel. #. In the menu that appears, select the :guilabel:`Filter...` menu item. The :guilabel:`Query Builder` dialog appears. #. You will now build a query to select only the candidate districts: #. In the :guilabel:`Fields` list, double-click on the ``NAME_2`` field to make it appear in the :guilabel:`SQL where clause` text field below #. Click the :guilabel:`IN` button to append it to the SQL query #. Open the brackets #. Click the :guilabel:`All` button below the (currently empty) :guilabel:`Values` list. After a short delay, this will populate the :guilabel:`Values` list with the values of the selected field (``NAME_2``). #. Double-click the value ``Bellville`` in the :guilabel:`Values` list to append it to the SQL query. #. Add a comma and double-click to add ``Cape`` district #. Repeat the previous step for the remaining districts #. Close the brackets The final query should be (the order of the districts in the brackets does not matter):: "NAME_2" in ('Bellville', 'Cape', 'Goodwood', 'Kuils River', 'Mitchells Plain', 'Simon Town', 'Wynberg') .. note:: You can also use the ``OR`` operator; the query would look like this:: "NAME_2" = 'Bellville' OR "NAME_2" = 'Cape' OR "NAME_2" = 'Goodwood' OR "NAME_2" = 'Kuils River' OR "NAME_2" = 'Mitchells Plain' OR "NAME_2" = 'Simon Town' OR "NAME_2" = 'Wynberg' #. Click :guilabel:`OK` twice. The districts shown in your map are now limited to those in the list above. Clip the Rasters ---------------------------------------------------------------------- Now that you have an area of interest, you can clip the rasters to this area. #. Open the clipping dialog by selecting the menu item :menuselection:`Raster --> Extraction --> Clip Raster by Mask Layer...` #. In the :guilabel:`Input layer` dropdown list, select the ``DEM`` layer #. In the :guilabel:`Mask layer` dropdown list, select the ``Districts`` layer #. Scroll down and specify an output location in the :guilabel:`Clipped (mask)` text field by clicking the :guilabel:`...` button and choosing :guilabel:`Save to File...` #. Navigate to the :file:`Rasterprac` directory #. Enter a file name - ``DEM_clipped.tif`` #. Save #. Make sure that |checkbox| :guilabel:`Open output file after running algorithm` is checked #. Click :guilabel:`Run` After the clipping operation has completed, leave the :guilabel:`Clip Raster by Mask Layer` dialog open, to be able to reuse the clipping area #. Select the ``Rainfall`` raster layer in the :guilabel:`Input layer` dropdown list and save your output as :file:`Rainfall_clipped.tif` #. Do not change any other options. Leave everything the same and click :guilabel:`Run`. #. After the second clipping operation has completed, you may close the :guilabel:`Clip Raster by Mask Layer` dialog #. Save the map Align the rasters ...................................................................... For our analysis we need the rasters to have the same CRS and they have to be aligned. First we change the resolution of our rainfall data to 30 meters (pixel size): #. Right-click on the ``Rainfall_clipped`` layer and select :menuselection:`Export--> Save As...` in the context menu. #. Under :guilabel:`Resolution`, set the :guilabel:`Horizontal` and :guilabel:`Vertical` resolutions to ``30`` (meters). #. Save the file as :file:`Rainfall30.tif` in :file:`rainfall/reprojected` (:guilabel:`File name`) Then we align the DEM: #. Right-click on the ``DEM_clipped`` layer and select :menuselection:`Export--> Save As...` in the context menu #. For :guilabel:`CRS`, choose *WGS 84 / UTM zone 33S* (EPSG code ``32733``) #. Under :guilabel:`Resolution`, set the :guilabel:`Horizontal` and :guilabel:`Vertical` resolutions to ``30`` (in meters). #. Under :guilabel:`Extent`, click on :guilabel:`Calculate from Layer` and choose ``Rainfall30`` #. Save the file as :file:`DEM30.tif` in :file:`DEM/reprojected` (:guilabel:`File name`) In order to properly see what's going on, the symbology for the layers needs to be changed. Changing the symbology of vector layers ---------------------------------------------------------------------- #. In the :guilabel:`Layers` panel, right-click on the :guilabel:`Streets` layer #. Select :guilabel:`Properties` from the menu that appears #. Switch to the :guilabel:`Symbology` tab in the dialog that appears #. Click on the :guilabel:`Fill` entry in the top widget #. Select a symbol in the list below or set a new one (color, transparency, ...) #. Click :guilabel:`OK` to close the :guilabel:`Layer Properties` dialog. This will change the rendering of the :guilabel:`Streets` layer. #. Follow a similar process for the :guilabel:`Zoning` layer and choose an appropriate color for it .. _changing_raster_symbology: Changing the symbology of raster layers ---------------------------------------------------------------------- Raster layer symbology is somewhat different. #. Open the :guilabel:`Properties` dialog for the :guilabel:`Rainfall30` raster layer #. Switch to the :guilabel:`Symbology` tab. You'll notice that this dialog is very different from the version used for vector layers. #. Expand :guilabel:`Min/Max Value Settings` #. Ensure that the button :guilabel:`Mean +/- standard deviation` is selected #. Make sure that the value in the associated box is ``2.00`` #. For :guilabel:`Contrast enhancement`, make sure it says :guilabel:`Stretch to MinMax` #. For :guilabel:`Color gradient`, change it to :guilabel:`White to Black` #. Click :guilabel:`OK` The ``Rainfall30`` raster, if visible, should change colors, allowing you to see different brightness values for each pixel #. Repeat this process for the ``DEM30`` layer, but set the standard deviations used for stretching to ``4.00`` Clean up the map ---------------------------------------------------------------------- #. Remove the original ``Rainfall`` and ``DEM`` layers, as well as ``Rainfall_clipped`` and ``DEM_clipped`` from the :guilabel:`Layers` panel: * Right-click on these layers and select :guilabel:`Remove`. .. note:: This will not remove the data from your storage device, it will merely take it out of your map. #. Save the map #. You can now hide the vector layers by unchecking the box next to them in the :guilabel:`Layers` panel. This will make the map render faster and will save you some time. Create the hillshade ---------------------------------------------------------------------- In order to create the hillshade, you will need to use an algorithm that was written for this purpose. #. In the :guilabel:`Layers` panel, ensure that ``DEM30`` is the active layer (i.e., it is highlighted by having been clicked on) #. Click on the :menuselection:`Raster --> Analysis --> Hillshade...` menu item to open the :guilabel:`Hillshade` dialog #. Scroll down to :guilabel:`Hillshade` and save the output in your :file:`Rasterprac` directory as :file:`hillshade.tif` #. Make sure that |checkbox| :guilabel:`Open output file after running algorithm` is checked #. Click :guilabel:`Run` #. Wait for it to finish processing. The new ``hillshade`` layer has appeared in the :guilabel:`Layers` panel. #. Right-click on the ``hillshade`` layer in the :guilabel:`Layers` panel and bring up the :guilabel:`Properties` dialog #. Click on the :guilabel:`Transparency` tab and set the :guilabel:`Global Opacity` slider to ``20%`` #. Click :guilabel:`OK` #. Note the effect when the transparent hillshade is superimposed over the clipped DEM. You may have to change the order of your layers, or click off the ``Rainfall30`` layer in order to see the effect. Slope ---------------------------------------------------------------------- #. Click on the :menuselection:`Raster --> Analysis --> Slope...` menu item to open the :guilabel:`Slope` algorithm dialog #. Select ``DEM30`` as :guilabel:`Input layer` #. Check |checkbox| :guilabel:`Slope expressed as percent instead of degrees`. Slope can be expressed in different units (percent or degrees). Our criteria suggest that the plant of interest grows on slopes with a gradient between 15% and 60%. So we need to make sure our slope data is expressed as a percent. #. Specify an appropriate file name and location for your output. #. Make sure that |checkbox| :guilabel:`Open output file after running algorithm` is checked #. Click :guilabel:`Run` The slope image has been calculated and added to the map. As usual, it is rendered in grayscale. Change the symbology to a more colorful one: #. Open the layer :guilabel:`Properties` dialog (as usual, via the right-click menu of the layer) #. Click on the :guilabel:`Symbology` tab #. Where it says :guilabel:`Singleband gray` (in the :guilabel:`Render type` dropdown menu), change it to :guilabel:`Singleband pseudocolor` #. Choose :guilabel:`Mean +/- standard deviation x` for :guilabel:`Min / Max Value Settings` with a value of ``2.0`` #. Select a suitable :guilabel:`Color ramp` #. Click :guilabel:`Run` |TY| Aspect ---------------------------------------------------------------------- Use the same approach as for calculating the slope, choosing :guilabel:`Aspect...` in the :menuselection:`Raster --> Analysis` menu. Remember to save the project periodically. Reclassifying rasters ---------------------------------------------------------------------- #. Choose :menuselection:`Raster --> Raster calculator...` #. Specify your :file:`Rasterprac` directory as the location for the :guilabel:`Output layer` (click on the :guilabel:`...` button), and save it as :file:`slope15_60.tif` #. Ensure that the :guilabel:`Open output file after running algorithm` box is selected. In the :guilabel:`Raster bands` list on the left, you will see all the raster layers in your :guilabel:`Layers` panel. If your Slope layer is called :guilabel:`slope`, it will be listed as ``slope@1``. Indicating band 1 of the slope raster. #. The slope needs to be between ``15`` and ``60`` degrees. Using the list items and buttons in the interface, build the following expression:: (slope@1 > 15) AND (slope@1 < 60) #. Set the :guilabel:`Output layer` field to an appropriate location and file name. #. Click :guilabel:`Run`. Now find the correct aspect (east-facing: between ``45`` and ``135`` degrees) using the same approach. #. Build the following expression:: (aspect@1 > 45) AND (aspect@1 < 135) You will know it worked when all of the east-facing slopes are white in the resulting raster (it's almost as if they are being lit by the morning sunlight). Find the correct rainfall (greater than ``1000`` mm) the same way. Use the following expression:: Rainfall30@1 > 1000 Now that you have all three criteria each in separate rasters, you need to combine them to see which areas satisfy all the criteria. To do so, the rasters will be multiplied with each other. When this happens, all overlapping pixels with a value of ``1`` will retain the value of ``1`` (i.e. the location meets the criteria), but if a pixel in any of the three rasters has the value of ``0`` (i.e. the location does not meet the criteria), then it will be ``0`` in the result. In this way, the result will contain only the overlapping areas that meet all of the appropriate criteria. Combining rasters ---------------------------------------------------------------------- #. Open the *Raster Calculator* (:menuselection:`Raster --> Raster Calculator...`) #. Build the following expression (with the appropriate names for your layers):: [aspect45_135] * [slope15_60] * [rainfall_1000] #. Set the output location to the :file:`Rasterprac` directory #. Name the output raster :file:`aspect_slope_rainfall.tif` #. Ensure that |checkbox| :guilabel:`Open output file after running algorithm` is checked #. Click :guilabel:`Run` The new raster now properly displays the areas where all three criteria are satisfied. Save the project. The next criterion that needs to be satisfied is that the area must be ``250`` m away from urban areas. We will satisfy this requirement by ensuring that the areas we compute are inside rural areas, and are ``250`` m or more from the edge of the area. Hence, we need to find all rural areas first. Finding rural areas ------------------------------------------------------------------------------- #. Hide all layers in the :guilabel:`Layers` panel #. Unhide the ``Zoning`` vector layer #. Right-click on it and bring up the :guilabel:`Attribute Table` dialog. Note the many different ways that the land is zoned here. We want to isolate the rural areas. Close the Attribute table. #. Right-click on the ``Zoning`` layer and select :guilabel:`Filter...` to bring up the :guilabel:`Query Builder` dialog #. Build the following query:: "Gen_Zoning" = 'Rural' See the earlier instructions if you get stuck. #. Click :guilabel:`OK` to close the :guilabel:`Query Builder` dialog. The query should return one feature. You should see the rural polygons from the ``Zoning`` layer. You will need to save these. #. In the right-click menu for ``Zoning``, select :menuselection:`Export --> Save Features As...`. #. Save your layer under the :file:`Rasterprac` directory #. Name the output file :file:`rural.shp` #. Click :guilabel:`OK` #. Save the project Now you need to exclude the areas that are within ``250m`` from the edge of the rural areas. Do this by creating a negative buffer, as explained below. Creating a negative buffer ---------------------------------------------------------------------- #. Click the menu item :menuselection:`Vector --> Geoprocessing Tools --> Buffer...` #. In the dialog that appears, select the ``rural`` layer as your input vector layer (:guilabel:`Selected features only` should not be checked) #. Set :guilabel:`Distance` to ``-250``. The negative value means that the buffer will be an internal buffer. Make sure that the units are meters in the dropdown menu. #. Check |checkbox| :guilabel:`Dissolve result` #. In :guilabel:`Buffered`, place the output file in the :file:`Rasterprac` directory, and name it :file:`rural_buffer.shp` #. Click :guilabel:`Save` #. Click :guilabel:`Run` and wait for the processing to complete #. Close the :guilabel:`Buffer` dialog. Make sure that your buffer worked correctly by noting how the ``rural_buffer`` layer is different from the ``rural`` layer. You may need to change the drawing order in order to observe the difference. #. Remove the ``rural`` layer #. Save the project Now you need to combine your ``rural_buffer`` vector layer with the ``aspect_slope_rainfall`` raster. To combine them, we will need to change the data format of one of the layers. In this case, you will vectorize the raster, since vector layers are more convenient when we want to calculate areas. Vectorizing the raster ---------------------------------------------------------------------- #. Click on the menu item :menuselection:`Raster --> Conversion --> Polygonize (Raster to Vector)...` #. Select the :file:`aspect_slope_rainfall` raster as :guilabel:`Input layer` #. Set :guilabel:`Name of the field to create` to ``suitable`` (the default field name is ``DN`` - Digital number data) #. Save the output. Under :guilabel:`Vectorized`, select :guilabel:`Save file as`. Set the location to :file:`Rasterprac` and name the file :file:`aspect_slope_rainfall_all.shp`. #. Ensure that |checkbox| :guilabel:`Open output file after running algorithm` is checked #. Click :guilabel:`Run` #. Close the dialog when processing is complete All areas of the raster have been vectorized, so you need to select only the areas that have a value of ``1`` in the ``suitable`` field. (Digital Number. #. Open the :guilabel:`Query Builder` dialog (right-click - :guilabel:`Filter...`) for the new vector layer #. Build this query:: "suitable" = 1 #. Click :guilabel:`OK` #. After you are sure the query is complete (and only the areas that meet all three criteria, i.e. with a value of ``1`` are visible), create a new vector file from the results, using the :guilabel:`Export --> Save Features As...` in the layer's right-click menu #. Save the file in the :file:`Rasterprac` directory #. Name the file :file:`aspect_slope_rainfall_1.shp` #. Remove the ``aspect_slope_rainfall_all`` layer from your map #. Save your project When we use an algorithm to vectorize a raster, sometimes the algorithm yields what is called "Invalid geometries", i.e. there are empty polygons, or polygons with mistakes in them, that will be difficult to analyze in the future. So, we need to use the "Fix Geometry" tool. Fixing geometry ---------------------------------------------------------------------- #. In the :guilabel:`Processing Toolbox`, search for "Fix geometries", and :guilabel:`Execute...` it #. For the :guilabel:`Input layer`, select ``aspect_slope_rainfall_1`` #. Under :guilabel:`Fixed geometries`, select :guilabel:`Save file as`, and save the output to :file:`Rasterprac` and name the file :file:`fixed_aspect_slope_rainfall.shp`. #. Ensure that |checkbox| :guilabel:`Open output file after running algorithm` is checked #. Click :guilabel:`Run` #. Close the dialog when processing is complete Now that you have vectorized the raster, and fixed the resulting geometry, you can combine the aspect, slope, and rainfall criteria with the distance from human settlement criteria by finding the intersection of the ``fixed_aspect_slope_rainfall`` layer and the ``rural_buffer`` layer. Determining the Intersection of vectors ---------------------------------------------------------------------- #. Click the menu item :menuselection:`Vector --> Geoprocessing Tools --> Intersection...` #. In the dialog that appears, select the ``rural_buffer`` layer as :guilabel:`Input layer` #. For the :guilabel:`Overlay layer`, select the ``fixed_aspect_slope_rainfall`` layer #. In :guilabel:`Intersection`, place the output file in the :file:`Rasterprac` directory #. Name the output file :file:`rural_aspect_slope_rainfall.shp` #. Click :guilabel:`Save` #. Click :guilabel:`Run` and wait for the processing to complete #. Close the :guilabel:`Intersection` dialog. Make sure that your intersection worked correctly by noting that only the overlapping areas remain. #. Save the project The next criteria on the list is that the area must be greater than ``6000`` ㎡. You will now calculate the polygon areas in order to identify the areas that are the appropriate size for this project. Calculating the area for each polygon ---------------------------------------------------------------------- #. Open the new vector layer's right-click menu #. Select :guilabel:`Open attribute table` #. Click the |toggleEditing| :sup:`Toggle editing` button in the top left corner of the table, or press :kbd:`Ctrl+e` #. Click the |calculateField| :sup:`Open field calculator` button in the toolbar along the top of the table, or press :kbd:`Ctrl+i` #. In the dialog that appears, make sure that |checkbox| :guilabel:`Create new field` is checked, and set the :guilabel:`Output field name` to ``area`` The output field type should be a decimal number (real). Set :guilabel:`Precision` to ``1`` (one decimal). #. In the :guilabel:`Expression` area, type:: $area This means that the field calculator will calculate the area of each polygon in the vector layer and will then populate a new integer column (called ``area``) with the computed value. #. Click :guilabel:`OK` #. Do the same thing for another new field called ``id``. In :guilabel:`Field calculator expression`, type:: $id This ensures that each polygon has a unique ID for identification purposes. #. Click |toggleEditing| :sup:`Toggle editing` again, and save your edits if prompted to do so Selecting areas of a given size ---------------------------------------------------------------------- Now that the areas are known: #. Build a query (as usual) to select only the polygons that are larger than ``6000`` ㎡. The query is:: "area" > 6000 #. Save the selection in the :file:`Rasterprac` directory as a new vector layer called :file:`suitable_areas.shp`. You now have the suitable areas that meet all of the habitat criteria for the rare fynbos plant, from which you will pick the four areas that are nearest to the University of Cape Town. Digitize the University of Cape Town ---------------------------------------------------------------------- #. Create a new vector layer in the :file:`Rasterprac` directory as before, but this time, use :guilabel:`Point` as :guilabel:`Geometry type` and name it :file:`university.shp` #. Ensure that it is in the correct CRS (``Project CRS:EPSG:32733 - WGS 84 / UTM zone 33S``) #. Finish creating the new layer (click :guilabel:`OK`) #. Hide all layers except the new ``university`` layer and the ``Streets`` layer. #. Add a background map (OSM): #. Go to the :guilabel:`Browser` panel and navigate to :menuselection:`XYZ Tiles --> OpenStreetMap` #. Drag and drop the ``OpenStreetMap`` entry to the bottom of the :guilabel:`Layers` panel Using your internet browser, look up the location of the University of Cape Town. Given Cape Town's unique topography, the university is in a very recognizable location. Before you return to QGIS, take note of where the university is located, and what is nearby. #. Ensure that the ``Streets`` layer clicked on, and that the ``university`` layer is highlighted in the :guilabel:`Layers` panel #. Navigate to the :menuselection:`View --> Toolbars` menu item and ensure that :guilabel:`Digitizing` is selected. You should then see a toolbar icon with a pencil on it (|toggleEditing| :sup:`Toggle editing`). This is the *Toggle Editing* button. #. Click the :guilabel:`Toggle editing` button to enter *edit mode*. This allows you to edit a vector layer #. Click the |capturePoint| :sup:`Add Point Feature` button, which should be nearby the |toggleEditing| :sup:`Toggle editing` button #. With the :guilabel:`Add feature` tool activated, left-click on your best estimate of the location of the University of Cape Town #. Supply an arbitrary integer when asked for the ``id`` #. Click :guilabel:`OK` #. Click the |saveEdits| :sup:`Save Layer Edits` button #. Click the :guilabel:`Toggle editing` button to stop your editing session #. Save the project Find the locations that are closest to the University of Cape Town ---------------------------------------------------------------------- #. Go to the *Processing Toolbox*, locate the *Join Attributes by Nearest* algorithm (:menuselection:`Vector general --> Join Attributes by Nearest`) and execute it #. :guilabel:`Input layer` should be ``university``, and :guilabel:`Input layer 2` ``suitable_areas`` #. Set an appropriate output location and name (:guilabel:`Joined layer`) #. Set the :guilabel:`Maximum nearest neighbors` to ``4`` #. Ensure that |checkbox| :guilabel:`Open output file after running algorithm` is checked #. Leave the rest of the parameters with their default values #. Click :guilabel:`Run` The resulting point layer will contain four features - they will all have the location of the university and its attributes, and in addition, the attributes of the nearby suitable areas (including the ``id``), and the distance to that location. #. Open the attribute table of the result of the join #. Note the ``id`` of the four nearest suitable areas, and then close the attribute table #. Open the attribute table of the ``suitable_areas`` layer #. Build a query to select the four suitable areas closest to the university (selecting them using the ``id`` field) This is the final answer to the research question. For your submission, create a fully labeled layout that includes the semi-transparent hillshade layer over an appealing raster of your choice (such as the DEM or the slope raster, for example). Also include the university and the ``suitable_areas`` layer, with the four suitable areas that are closest to the university highlighted. Follow all the best practices for cartography in creating your output map. .. Substitutions definitions - AVOID EDITING PAST THIS LINE This will be automatically updated by the find_set_subst.py script. If you need to create a new substitution manually, please add it also to the substitutions.txt file in the source folder. .. |FA| replace:: Follow Along: .. |LS| replace:: Lesson: .. |TY| replace:: Try Yourself .. |addOgrLayer| image:: /static/common/mActionAddOgrLayer.png :width: 1.5em .. |addRasterLayer| image:: /static/common/mActionAddRasterLayer.png :width: 1.5em .. |calculateField| image:: /static/common/mActionCalculateField.png :width: 1.5em .. |capturePoint| image:: /static/common/mActionCapturePoint.png :width: 1.5em .. |checkbox| image:: /static/common/checkbox.png :width: 1.3em .. |dataSourceManager| image:: /static/common/mActionDataSourceManager.png :width: 1.5em .. |fileSave| image:: /static/common/mActionFileSave.png :width: 1.5em .. |projectionEnabled| image:: /static/common/mIconProjectionEnabled.png :width: 1.5em .. |radioButtonOn| image:: /static/common/radiobuttonon.png :width: 1.5em .. |saveEdits| image:: /static/common/mActionSaveEdits.png :width: 1.5em .. |toggleEditing| image:: /static/common/mActionToggleEditing.png :width: 1.5em